···
Log in / Register

Where are Panda tires produced?

4 Answers
Landon
07/29/25 10:46pm

Panda tires are produced in China. Here is some relevant information about tires: Tire Introduction: Tires are the only components of a car that come into contact with the ground. Some car owners only replace the tires on the drive wheels when changing tires. For example, some front-wheel-drive car owners only replace the two front tires, while some rear-wheel-drive car owners only replace the two rear tires. In fact, this practice is acceptable. Tire Aging: Tires are rubber products and will age over time. It is recommended that car owners replace their tires every four years, even if the mileage is low during those four years. This is because tires can also age when left unused for extended periods, so it's important to check the production date when purchasing tires.

Was this review help?
13
4
Share
Sidney
08/16/25 12:08am

I understand that Panda Tires is a brand under Shandong Hongyu Rubber Company, with its main production base in Dongying City, Shandong Province. This brand has a decent reputation among domestic brands. I remember a friend who replaced his car tires with theirs mentioned they had good wear resistance and stable grip. Dongying is a nationally renowned tire industry hub with many major manufacturers located there, boasting a highly mature industrial chain. They likely have large-scale production facilities locally, with equipment and technology meeting international standards. If you want to confirm, checking the origin marking engraved on the tire sidewall is the most accurate method—it usually indicates 'Made in Dongying, Shandong.'

Was this review help?
13
4
Share
Expand All
StLeonardo
10/18/25 4:50am

When researching auto parts before, I specifically looked into Panda tires, which are mainly produced in factories in Dongying, Shandong. A friend who owns an auto repair shop mentioned they always keep this brand in stock, and car owners have given positive feedback on its cost-performance ratio, saying it holds up well for about 50,000 to 60,000 kilometers. The tire industry in Shandong is particularly developed, with convenient access to raw materials and good control over production costs, making the pricing quite affordable. Nowadays, when buying tires on e-commerce platforms, the product details usually specify that they are manufactured in Dongying, Shandong. I personally think domestic tires have made significant progress in recent years and aren't much worse than imported ones.

Was this review help?
6
2
Share
Expand All
McElliot
12/01/25 5:29am

Panda Tires are manufactured in Dongying, Shandong, and belong to Hongyu Rubber Company. This information can be directly checked on the official website or seen on the product packaging. As a major hub for tire manufacturing in China, Dongying hosts many factories with standardized production equipment and quality inspection processes. I remember discussing this brand in a car owners' group last year, where some owners mentioned its good noise control at highway speeds. If you're considering buying new tires, it's advisable to also check the production date and tread depth, as these factors can have a more significant impact on actual performance than just focusing on the place of manufacture.

Was this review help?
9
4
Share
Expand All
More Forum Discussions

What are the techniques for depressing the clutch?

The methods for depressing the clutch are as follows: 1. Depress the clutch quickly to ensure complete separation and avoid clutch slippage; 2. Release the clutch slowly to ensure smooth vehicle operation; 3. Do not depress the clutch arbitrarily. Precautions for clutch usage are: 1. The clutch must be thoroughly cleaned before installation to remove anti-rust grease and debris; 2. The clutch can be installed coaxially or separately, but the axial direction must be fixed; 3. For wet electromagnetic clutches, lubricating oil must be added between the friction plates during operation; 4. The power supply and control circuits should be noted, with the clutch power supply being 24V DC; 5. When installing a jaw-type electromagnetic clutch, ensure there is a certain gap between the end face teeth to prevent grinding during idle operation.
7
2
Share

What is the normal tire pressure in kPa?

Generally, a tire pressure value between 2.3 and 2.5 is considered normal. If the car is fully loaded (5 people), it is more appropriate to adjust the tire pressure to around 2.5. In general, there are two situations where a tire pressure value of 2.3 is also normal. Content Extension: 1. The standard tire pressure value is inherently a conservative figure, allowing for minor fluctuations. Therefore, whether in winter or summer, tires should be inflated according to the standard tire pressure. As long as the standard tire pressure is maintained, there is no need to worry about the impact of external temperature on tire pressure, and there is no necessity to adjust the inflation pressure standard based on temperature variations. 2. Tires require the correct pressure value to function effectively; neither too low nor too high tire pressure is good. 3. Low tire pressure can lead to: tire overload and overheating, which may even cause tire explosions, premature or irregular wear, poor handling, and reduced fuel economy. 4. High tire pressure can result in: abnormal wear, poor handling, reduced ride comfort, and unnecessary damage due to road hazards.
8
3
Share

What is the vehicle and vessel tax for a 2.4L displacement car?

For passenger vehicles with a 2.4L displacement and seating capacity of 9 or fewer, the annual vehicle and vessel tax ranges from 720 to 900. The vehicle and vessel tax not only varies based on the car's displacement but also differs across regions, meaning the same displacement vehicles may have different tax standards in different areas. Extended Content: 1. For motor vehicles (excluding trucks) and non-motor vehicles, the tax payable = number of taxable vehicles × unit tax amount. 2. For trucks, motorized boats, and non-motorized boats, the tax payable = tonnage or net tonnage of the vehicle or boat × unit tax amount.
19
3
Share

What Causes an Automatic Transmission Car to Not Move When Shifted to D Gear?

Here are the specific reasons why an automatic transmission car does not move after shifting to D gear: 1. Check if the transmission fluid level is too low, whether the main oil pressure and gear oil pressure are normal, and then verify if the gear switch signal is normal, if the wiring from the transmission computer to the shift solenoid valve is intact, and if the gear solenoid valve is functioning properly. 2. If none of the above issues are found, it indicates a problem with the internal control system of the transmission, requiring disassembly of the transmission to inspect the internal components. Below is additional information about automatic transmission gears: (1) The R gear is the reverse gear. When engaged, it connects the hydraulic system to the reverse gear circuit, causing the drive wheels to turn in reverse for backing up. Do not forcibly shift to "R" gear when the vehicle is not completely stopped, as this can damage the transmission. (2) The N gear is the neutral gear. When in neutral, the planetary gear system idles without transmitting power. (3) The D gear is the drive gear. When the shift lever is in this position, the hydraulic control system automatically engages the appropriate forward gear circuit based on throttle opening and vehicle speed signals, shifting gears automatically as speed changes to achieve automatic transmission functionality. (4) The P gear is the parking gear. It uses a mechanical device to lock the rotating parts of the car's tires, preventing the vehicle from moving.
12
2
Share

What to do if three windows of BYD S6 malfunction?

If three windows of BYD S6 malfunction, lift the window button directly to raise the window to the top, hold for 3-5 seconds and then release. Then press the window button to lower the window to the bottom, hold for 3-5 seconds and release. Here is more information about BYD: 1. BYD is a Chinese automobile brand founded in 1995, mainly producing commercial cars, family cars, and batteries. 2. Representative models of BYD include traditional high-quality fuel vehicles such as F3, F3R, F6, F0, G3, G3R, L3/G6, and Surui, the S8 sports hardtop convertible, the high-end SUV model S6 and MPV model M6, as well as the globally leading F3DM, F6DM dual-mode electric vehicles and the pure electric vehicle E6.
6
4
Share

What does it mean to schedule two sessions for Subject One?

Subject One scheduling two sessions is mainly to increase the chance of successful registration. Here is the relevant introduction about Subject One: 1. Exam Introduction: The driver's license exam Subject One tests theoretical knowledge, conducted at the DMV, and is a mandatory licensing exam for applicants. The exam content includes the most basic knowledge such as driving theory foundation, road safety laws and regulations, traffic signals, traffic rules, plus local regulations. The schedule for the driver theory exam is arranged by local DMVs. 2. Exam Process: The total time for the Subject One exam is 45 minutes, with the exam paper consisting of 100 questions, including true/false and single-choice questions, with a full score of 100 and a passing score of 90. The exam paper is randomly selected and combined by the computer driver exam system according to the proportion specified in the "Motor Vehicle Driver's License Business Work Standards."
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.