Where are Lynk & Co cars produced?

1 Answers
KadenMarie
07/28/25 6:42pm
Lynk & Co is produced in China. Below is relevant information about Lynk & Co vehicles: Powertrain: Most Lynk & Co vehicles use either a 1.5T three-cylinder engine or a 2.0T four-cylinder engine. The engines primarily utilize Volvo's technology, though there are differences between Lynk & Co and Volvo engines, particularly in materials. Except for the Lynk & Co 03, other models in the lineup feature similar 1.5T and 2.0T engines. Configuration: Lynk & Co employs the CMA architecture, which was developed by Volvo Cars in collaboration with Geely Auto at the Geely Auto European R&D Center. The CMA platform offers flexibility and scalability, accommodating various body styles and vehicle sizes. It supports both conventional and new energy powertrains, including HEV hybrid and PHEV plug-in hybrid systems, and is compatible with multiple powertrain configurations. This architecture enables the development of vehicles with active safety, intelligent driving, and connected car technologies.
Was this review help?
3
5
Share
More Forum Discussions

Why Does the Window Make Continuous Noise When Raised to the Top?

Continuous noise when the window is raised to the top may be due to insufficient lubrication or malfunction of the lifting motor. Spraying liquid butter along the rubber seal can improve the situation, but it is recommended to have it checked and replaced at a professional facility. Additional information about automotive glass is as follows: 1. Tempered Glass: Automotive glass is manufactured by heating the glass to near its softening point in a furnace, then rapidly transferring it to fans with varying cooling intensities for uneven cooling. This process creates different stress levels between the main viewing area and the peripheral regions, producing zone-tempered glass. 2. Classification: Automotive glass is an essential component of vehicle body attachments, primarily serving a protective function. There are three main types: laminated glass, tempered glass, and zone-tempered glass, all of which can withstand significant impact forces. 3. Function: Most front windshields are made of laminated glass, which consists of three layers. The middle layer is highly resilient and adhesive, ensuring that the inner and outer layers remain bonded to it upon impact, reducing the risk of injury. Vehicles may use soundproof glass in the front, rear, or throughout the entire cabin. Soundproof glass is a product designed to block sound, typically featuring a double or multi-layer composite structure of laminated glass. The sound-damping adhesive (film) in the middle layer plays a crucial role in weakening and attenuating sound transmission.
19
2
Share

What are the reasons for the failure to start due to electronic steering lock malfunction?

Electronic steering lock malfunction preventing startup can be caused by steering system failure, insufficient tire pressure, or loose bolts. Below are the specific explanations: 1. Steering system failure: There is a large amount of air in the power steering system. Foreign objects in the steering system cause the steering pump flow control valve to stick. Excessive wear of the steering gear piston cylinder, among other reasons. 2. Insufficient tire pressure: Low tire pressure, interference or loose connections in the steering column of the pump, loose or slipping pump belt, or loose pump installation position. 3. Loose bolts: Bolts at various connection points of the oil pipe are loose, leading to steering fluid leakage.
16
3
Share

Consequences of Continuing to Drive After a Blown Head Gasket?

Continuing to drive after a blown head gasket can lead to severe consequences such as cylinder scoring, bearing seizure, bearing burnout, and even engine explosion, which is extremely dangerous. Expanded information about the head gasket is as follows: 1. Definition: The head gasket is the seal between the engine block and the cylinder head. When it fails, combustion pressure leaks into the cooling system, forcing coolant out through the radiator cap. Insufficient coolant leads to overheating, and in extreme cases, can cause cylinder scoring. Severe cases may result in bearing seizure, bearing burnout, or engine explosion. 2. Functions: Connects the cylinder head to the engine block; Seals engine oil, coolant, and combustion gases; Dissipates heat generated in the engine block through the cylinder head.
2
4
Share

Does Driving Directly in D Gear with Electronic Handbrake Damage the Car?

Driving directly in D gear with the electronic handbrake on can damage the car. Here is a brief introduction to the electronic handbrake: 1. Basic Information: The electronic handbrake, also known as the Electronic Parking Brake (EPB) system, integrates temporary braking during driving with long-term parking braking, and achieves parking braking through electronic control. 2. Working Principle: The electronic handbrake uses electronic control to achieve parking braking. Its working principle is the same as that of a mechanical handbrake, both of which control parking braking through the friction generated between the brake disc and brake pads. The only difference is that the control method has changed from the mechanical handbrake lever to an electronic button.
5
3
Share

What do the two dials on the car represent?

The two dials on the car display the following information: the upper one shows the distance traveled since the last refueling, while the lower one indicates the total accumulated mileage of the vehicle. Additional details about the speedometer and odometer are provided below: 1. Introduction: Traditional speedometers are mechanical, typically connected via a flexible shaft containing a steel cable. The other end of the flexible shaft attaches to a gear in the transmission. The rotation of the gear drives the steel cable, which in turn rotates a magnet inside the speedometer housing. The housing is linked to the needle, and a hairspring keeps the needle at zero. The speed of the magnet's rotation affects the magnetic field strength, disrupting the balance and causing the needle to move. 2. Location: The speedometer displays the car's speed in km/h (kilometers per hour). The odometer actually consists of two meters: one for speed and another for distance. The car's odometer is positioned directly in front of the driver's seat.
6
5
Share

What Causes Insufficient Clamping Force in an Electronic Parking Brake?

Electronic parking brake controllers may have insufficient braking force or issues with internal torque sensors. Below is relevant information about electronic parking brakes: 1. Principle: The electronic parking system, technically known as an electromechanical parking brake, differs from conventional mechanical parking brake systems (hereafter referred to as handbrakes) by utilizing electronic control technology to achieve parking braking. Its working principle remains the same as mechanical handbrakes, relying on friction generated between brake discs and pads to control parking braking. The key difference lies in the control mechanism, which replaces the traditional mechanical handbrake lever with an electronic button - hence the name "electronic parking brake." 2. Functions: Provides sufficient braking force to ensure vehicle parking safety; Features a mechanical locking function when the parking brake system reaches its limit position; Can be operated from within the cockpit; Displays parking brake status on the instrument panel; Includes automatic adjustment capability for actuator clamping force.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.