Where are Liechi tires produced?

What is the speed limit on Shenhai Expressway?

Shenhai Expressway has a maximum design speed limit of 120 kilometers per hour. However, it should be noted that this is the design speed limit, and the actual speed limit may vary depending on the section and vehicle type. Please refer to the speed limit signs on specific sections, as many sections generally have speed limits ranging from 100 to 110 kilometers per hour. Here is more detailed information about the speed limits on Shenhai Expressway: 1. Traffic police may impose speed limits in accident-prone areas, such as sharp curves, long slopes, or tunnels, where the speed limit could be as low as 80 kilometers per hour. 2. The speed limit also depends on the type of vehicle being driven. For passenger cars, the maximum speed limit is 120 kilometers per hour, while for large trucks, it is 100 kilometers per hour. Some expressways allow motorcycles, which have a lower speed limit of 80 kilometers per hour.

16

2

Share

What is the tire specification for the Volvo XC60?

Volvo XC60 comes with three standard tire sizes. Below are the relevant details about the tire specifications for the Volvo XC60: 1. The 2.0T Momentum version uses tires with the specification 235/65-R17. 2. The 2.0T T5 Inscription version and the 2.0T T5 R-Design version use tires with the specification 235/60-R18. 3. The 2.0T Inscription version, 3.0T Inscription version, and 3.0T R-Design version use tires with the specification 235/55-R19, while the top-of-the-line 3.0T R-Design Sport version uses 255/45-R20.

20

0

Share

What Causes a Truck to Pull to One Side?

There are five main reasons why a truck may pull to one side: 1. Uneven tire pressure; 2. Uneven tire tread wear; 3. Inaccurate wheel alignment parameters; 4. Deformed or failed shock absorber springs; 5. Bent or deformed steering knuckle arms or steering knuckles. There are two common scenarios where a vehicle pulls to one side: 1. Steering wheel-related causes: Uneven tire pressure on the same axle causes the vehicle to pull toward the side with lower pressure, or uneven wheel height causes the vehicle to pull toward the lower side; 2. Alignment angle-related causes: A skewed rear axle creates a thrust angle, causing the vehicle to pull in the opposite direction of the thrust line. Uneven camber angles on the same axle cause the vehicle to pull toward the side with a larger camber angle.

5

3

Share

What are the first maintenance regulations for the 2021 Bora?

Here are the first maintenance regulations for the 2021 Bora: 1. The Bora 1.6L model requires its first maintenance when the mileage reaches 7,500-10,000 kilometers, with regular maintenance every 15,000 kilometers or 1 year. 2. The Bora 1.4TSI model requires its first maintenance when the mileage reaches 5,000 kilometers, with regular maintenance every 10,000 kilometers or 1 year. Here are more details about the 2021 Bora maintenance: 1. The new Bora comes with a two-year or 60,000-kilometer warranty, and the maintenance includes oil and oil filter replacement. 2. Within 60,000 kilometers, it is recommended for both models to replace the gasoline filter, air conditioning filter, and spark plugs every 30,000 kilometers. 3. The transmission oil should be replaced every 60,000 kilometers.

11

0

Share

What are the two items next to the clutch?

The two items next to the clutch are the accelerator pedal and the brake pedal. Here are detailed introductions: 1. Accelerator pedal: The accelerator pedal, also known as the throttle pedal, is mainly used to control the opening of the engine throttle, thereby controlling the power output of the engine. Traditional accelerator pedals are connected to the throttle via a throttle cable or linkage. With the continuous development of automotive electronic technology, electronic throttles are becoming increasingly widespread. When a driver steps on the accelerator pedal of an electronic throttle, it actually sends a throttle pedal position sensor signal to the engine ECU. 2. Brake pedal: The brake pedal is the pedal that limits power, i.e., the pedal of the foot brake (service brake), used for deceleration and stopping. It is one of the five major control components in car driving and is used very frequently. The driver's control ability directly affects the driving safety of the car.

10

5

Share

Can Plastic Scratches on Wheel Arches Be Repaired?

Yes, they can be repaired through gray polishing or grinding and polishing. Here are the relevant details: 1. Grinding and Polishing: Grinding and polishing involves smoothing the rough surface of plastic products. The polishing material can be processed using fine silicon dioxide powder of around 300 mesh. For transparent plastic products with low hardness, such as organic glass or polystyrene, an appropriate amount of green oil can be added to the material. If the surface requirements are not high, cleaning and drying after gray polishing or grinding and polishing can complete the process. 2. Wheel Arch: Wheel arch, short for car wheel arch, refers to the chrome trim along the upper edge of the tire, which is the semi-circular component protruding from the fender above the car tire.

14

1

Share

Where are Liechi tires produced?

What is the speed limit on Shenhai Expressway?

What is the tire specification for the Volvo XC60?

What Causes a Truck to Pull to One Side?

What are the first maintenance regulations for the 2021 Bora?

What are the two items next to the clutch?

Can Plastic Scratches on Wheel Arches Be Repaired?

What are the differences between the Mercedes-Benz GLA and GLB?

What Causes Car Body Vibration at Idle Speed?

Why Are There Few Buyers for the BMW 6 Series?

What are the hazards of engine braking?