Where are Kumho Tires produced?

1 Answers
JudahLynn
07/30/25 4:51am
Kumho Tires are produced at the Nanjing plant, Nanjing TBR plant, Tianjin plant, and Changchun plant. Additionally, Kumho Tire Sales Co., Ltd. was established in Shanghai, primarily responsible for the sales of tires produced by the four major factories nationwide, achieving complete separation of production and sales. Kumho Tires boasts a comprehensive production line, covering various categories such as passenger car tires, commercial vehicle tires, and high-tech tires. Kumho Tires has a development history of over 50 years since the 1960s. It also operates four technology R&D centers globally, located in Gwangju, South Korea; Tianjin, China; Akron, USA; and Birmingham, UK. As of 2013, Kumho Tires produced approximately 6.5 million tires annually and exported tire products to over 22 countries and regions. As an internationally renowned tire manufacturer that entered the Chinese market nearly 20 years ago, Kumho Tires not only has a Shanghai sales headquarters that radiates nationwide but also established the Nanjing plant as early as 1994. On April 1, 2018, the Kumho Tires union in South Korea voted to finally agree to sell the company to China's Qingdao Doublestar.
Was this review help?
14
5
Share
More Forum Discussions

What are the regulations for motorcycle color changes?

Motor vehicle owners should bring the vehicle qualification certificate, driving license, and ID card to the vehicle management office at the registration location to apply for a change registration. The following is extended information regarding motorcycle color changes: 1. Relevant regulations: According to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China", registered motor vehicles must apply for a change registration with the traffic management department of the public security authority where the vehicle is registered under any of the following circumstances: changing the body color of the motor vehicle. 2. Precautions: The appearance cannot be modified, the horn cannot be modified, modifications must be legal. Illegal motor vehicle modifications refer to modifications to the vehicle's appearance, power system, transmission system, or braking system that exceed the original design standards without national legal permission or manufacturer consent, including the replacement of key components. Article 16, Item 1 of the "Road Traffic Safety Law of the People's Republic of China" stipulates that no unit or individual may assemble a motor vehicle or alter the registered structure, construction, or characteristics of a motor vehicle without authorization.
4
1
Share

What is the distance for the motorcycle Class 2 slalom test?

For ordinary and light two-wheeled motorcycles, the distance is the vehicle length plus 500mm; for regular three-wheeled motorcycles, it's the vehicle length plus 400mm; for three-wheeled motorcycles, it's the vehicle length plus 800mm; the finish line is 3 times the vehicle length away from the last pole. Below is relevant information about the Class 2 test: 1. Requirements: Generally, the test requires navigating through 5 poles in an S-shape with a spacing of 2500mm. The white lines on both sides are slightly over 1000mm. Failing to stay within the lines, hitting the poles, or stalling will result in failure. After completing the slalom, you must circle around and navigate back through the poles. 2. Evaluation criteria: Failing to follow the designated route or sequence will result in failure; touching or scraping the poles will result in failure; the vehicle body or wheels going out of bounds (for two-wheeled motorcycles) will result in failure; failing to complete the reverse parking or relocation will result in failure; stopping midway or exceeding the allotted time will result in failure.
18
3
Share

What to Do When the 5th Gear of a Manual Transmission Car Gets Stuck and Cannot Be Disengaged?

The solutions for a manual transmission car's 5th gear getting stuck and unable to be disengaged are: 1. Check if the clutch pedal's free travel is too large and adjust it; 2. Check if the separation lever height is consistent and not too low. Under the car, move the separation fork so that the front end of the separation bearing lightly touches the inner end of the separation lever. Rotate the clutch once to inspect. If the inner end of the separation lever cannot simultaneously contact the separation bearing, it indicates the separation lever height is inconsistent and should be adjusted. The method to start a manual transmission car is: 1. Insert the key and turn on the ignition switch to start the engine; 2. Press the clutch pedal and shift the gear lever into 1st gear; 3. Release the handbrake, lift the clutch pedal, and press the accelerator.
12
3
Share

What is the oil change interval for FAW-Volkswagen 0W20 engine oil?

When using conventional engine oil, it is recommended to change it every 5,000 kilometers or every six months. For those who frequently drive at high speeds, accelerate aggressively, or are travel enthusiasts, imported premium full synthetic oil can be used. Below is an introduction about FAW-Volkswagen: 1. Overview: FAW-Volkswagen (FAW-Volkswagen Automobile Co., Ltd.) is a large passenger vehicle manufacturer established on February 6, 1991, headquartered in Changchun, Jilin, China. 2. Classification: FAW-Volkswagen has three major production bases in Changchun, Chengdu, and Foshan, including Car Plant 1, Car Plant 2, Car Plant 3 (Chengdu Branch), and an engine and transmission plant. 3. Development: FAW-Volkswagen was officially established in 1991 and has now been in operation for over 20 years. During these two decades of rapid development, FAW-Volkswagen has continuously grown, creating numerous 'firsts' in China's automotive history. With advanced manufacturing techniques and a strong reputation among users, it has become one of the most renowned automotive brands in China today.
6
5
Share

Can the air brake be pressed continuously?

Air brakes cannot be pressed continuously. Keeping them pressed will deplete the air in the air tank, resulting in a loss of braking capability. The method for using air brakes: 1. The vehicle's air pressure must reach at least 5 before releasing the hand brake; 2. Before starting the vehicle, ensure the air pressure is above 6 to drive, otherwise insufficient air pressure when braking may cause difficulty in starting. The air brake is a braking system composed of a brake control mechanism, dual-circuit braking mechanism, central disc brake mechanism, brake, air compressor, etc. When the engine drives the compressor, the compressed air first passes through a one-way valve into the wet reservoir. After cooling and oil-water separation in the wet reservoir, the compressed air is then directed through two one-way valves into the front and rear chambers of the air reservoir. The front chamber of the air reservoir is connected to the upper chamber of the tandem dual-chamber brake valve, which can inflate the rear brake chamber, while the rear chamber of the air reservoir is connected to the lower chamber of the brake valve, which can inflate the front air reservoir.
3
4
Share

What is the reason for the abnormal noise when braking in reverse but not when moving forward?

The reason for the abnormal noise when braking in reverse but not when moving forward is: When braking, the brake pads and brake disc wear in one direction for a long time, and the brake pads contain metal components, causing some metal burrs to form on one side of the brake pads. When braking in reverse, the tips of these burrs come into contact with the brake disc, resulting in abnormal noise. The brake disc is a circular disc that rotates when the vehicle is moving. When braking, the brake caliper clamps the brake disc to slow down or stop the vehicle. The brake disc is a crucial component of the braking system, which can be categorized into disc brakes, drum brakes, and air brakes. Structurally, they can be divided into solid brake discs and ventilated discs, while in terms of material, they can be carbon fiber ceramic brake discs or metal brake discs. The maintenance methods for brake discs include: 1. Developing good driving habits; 2. Avoiding emergency braking; 3. Regularly inspecting the brake pads and brake disc; 4. Checking the thickness of the friction pads; 5. Having a professional inspect the brake shoes; 6. Using original manufacturer-provided brake pads and brake discs when replacing them.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.