Where are Damai tires produced?

What are the reasons for frequent charging interruptions in the BYD Tang?

The reasons for frequent charging interruptions in the BYD Tang may be caused by faults in the low-voltage iron battery, battery management system, onboard charger, or user charging equipment. Below is relevant information about the BYD Tang: 1. Overview: The BYD Tang (English name: BYD-Don, the all-new generation Tang) is a mid-size SUV under the BYD brand. The all-new generation Tang has been officially launched, offering three different drivetrain variants: fuel-powered vehicle (all-new generation Tang), plug-in hybrid vehicle (all-new generation Tang DM), and pure electric vehicle (all-new generation Tang EV600). Both the fuel-powered and plug-in hybrid variants are available in five-seat and seven-seat configurations. All three drivetrain variants are built on BYD's BNA architecture-based BLP large luxury vehicle platform, featuring essentially identical exterior styling and adopting BYD's latest family-oriented "Dragon-Face" design philosophy. 2. Exterior: The all-new generation BYD Tang fuel variant is designed based on the latest Dragon-Face design language, showcasing significant changes compared to the previous generation, primarily influenced by the vision brought by former Audi design director Wolfgang Egger. The signature large grille is paired with LED headlights on both sides.

12

1

Share

Under what circumstances should the Magotan S gear be used?

The Magotan S gear is generally used in the following three situations: 1. When overtaking: Due to prolonged low-gear fuel supplementation, the S gear increases fuel consumption. Most people choose to engage the S gear when overtaking. During normal driving, the D gear is preferred as it is more fuel-efficient compared to the S gear. 2. When climbing slopes: The S gear allows for greater torque output and acceleration in a shorter time, making the car more powerful when climbing slopes, effectively serving as a reliable assistant for uphill driving. 3. For carbon deposit removal: Engaging the S gear can increase the engine load and raise the temperature in a short time, which is beneficial for removing engine carbon deposits. Driving precautions are as follows: 1. Maintain a cautious attitude. As a qualified driver, one must never take unnecessary risks. 2. Adjust the RPM appropriately. This allows for optimal power utilization while maintaining fuel efficiency. During driving, shift gears timely based on the RPM, speed, engine sound, and feel. Since the 1st gear is the starting gear and has a gear ratio performance similar to the reverse gear, it is not suitable for prolonged high-speed operation. Generally, shift to the 2nd gear once the car gains momentum. 3. Shift gears decisively and smoothly. Depress the clutch pedal quickly and release it slowly to avoid a drop in engine RPM after shifting. If this occurs, downshift again or even skip a gear. When downshifting, press the clutch first before releasing the throttle; otherwise, the engine will slow down the vehicle.

12

3

Share

Which car brand has a snake logo?

There are several brands with snake logos, including the Ford Mustang Cobra under the Ford brand, the Dodge Viper, and Alfa Romeo. Below is an introduction to cars with snake logos: 1. The Ford Mustang Cobra is based on the fifth-generation Ford Mustang but has undergone appropriate exterior modifications to match its performance upgrades. The most striking feature is its large front grille, which occupies over 60% of the front fascia. The aggressive Cobra logo replaces the original galloping horse emblem on the grille. The aluminum engine hood reduces weight, while the vents above help dissipate engine heat. 2. The Dodge Viper is a supercar series launched by Chrysler after acquiring Dodge Brothers in 1989. The Viper series represents American supercars and is considered one of the most cost-effective supercars. Compared to established sports cars like the Ford GT and Chevrolet Corvette, the Viper may seem relatively youthful. However, it continues to embody the essence of American sports cars, designed from the outset to achieve racing-level handling (in fact, the SRT Viper can be seen as a modern version of the AC Cobra, featuring a lightweight body paired with a high-power, high-torque engine, delivering an extreme power-to-weight ratio and a raw driving experience). The SRT Viper is a classic example of upholding the tradition of American sports cars, staying true to large-displacement engines. 3. Alfa Romeo is an Italian car manufacturer primarily producing sports cars and sedans. Headquartered in Milan, the company was founded in 1910 by Nicola Romeo. After years of development, it was officially acquired by the Fiat Group in 1986 and entered the Chinese market in April 2017.

11

2

Share

What type of engine oil should be used for Citroen C5?

Citroen C5 is suitable for engine oil with the specification of 5W30, but 5W40 can also be used. Both 5W30 and 5W40 have the same low-temperature fluidity, but their high-temperature performance differs. 5W40 offers better high-temperature protection and sealing performance. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity—5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts for the car. The second number represents the kinematic viscosity of the oil at 100°C. A higher value means the oil can maintain its viscosity better under high temperatures, which can also be understood as providing better lubrication performance in high-temperature conditions. The method for changing the engine oil in a Citroen C5 is as follows: Wait for the engine temperature to cool down, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine for about 30 seconds to allow the oil in the main oil passage to drain; Use a specialized wrench to remove the oil filter; Apply engine oil to the oil seal of the new oil filter and tighten it clockwise by hand; Pour the new engine oil into the oil filler cap on the engine valve cover. Generally, fill up to three-quarters of the oil container; Start the engine and let it run for 5 minutes, then check for any leaks around the oil drain plug and oil filter. If leaks are found, repairs should be made; After stopping the engine, pull out the dipstick to check if the engine oil level is within the standard range.

18

5

Share

How to Read an Automotive Air Conditioning Pressure Gauge?

An automotive air conditioning pressure gauge consists of two gauges: the red one is the high-pressure gauge, and the blue one is the low-pressure gauge. Under normal operating conditions of the air conditioning system, the low-pressure reading should be between 1.0–2.5 bar, and the high-pressure reading should be between 15–18 bar. If the low-pressure reading is higher or lower than this range, it indicates abnormal expansion valve regulation or issues with the compressor's performance. The automotive air conditioning pressure gauge is used to diagnose the refrigeration system. If the gauge readings deviate from the normal values, it suggests a potential fault in the refrigeration system. Below are common fault scenarios: 1. When the pressure gauge shows low low-pressure and low high-pressure readings, this may indicate insufficient refrigerant, which is a common issue. In older vehicles, refrigerant leaks may occur, and the problem can be resolved by recharging the refrigerant after inspection. 2. When the pressure gauge shows high low-pressure and high high-pressure readings, this may indicate a stuck-open expansion valve. Poor cooling performance accompanied by high low and high-pressure readings suggests the expansion valve is stuck open, allowing air to enter the refrigeration system and mixing high and low pressures, leading to reduced cooling efficiency. Replacing the expansion valve can resolve this issue. 3. When the pressure gauge shows a vacuum in the low-pressure side and low high-pressure readings, this may indicate a stuck-closed expansion valve. If the vehicle's air conditioning fails to cool, the issue is often due to the evaporator expansion valve being stuck closed, requiring replacement. 4. When the pressure gauge shows fluctuating low-pressure readings (sometimes normal, sometimes vacuum) and fluctuating high-pressure readings (sometimes normal, sometimes low), this may indicate moisture in the refrigeration system. When moisture freezes in the lines, it can cause a vacuum in the low-pressure lines. Once the ice melts, the system returns to normal. To fix this, the refrigerant must be purged, the system evacuated, and new refrigerant added. 5. When the pressure gauge shows high low-pressure and low high-pressure readings, this may indicate a compressor fault. If the gauge displays these readings despite sufficient refrigerant in the system and poor cooling performance, the issue likely lies with the compressor, possibly due to internal leaks. Replacing the compressor usually resolves the problem.

20

5

Share

What is the normal fuel consumption for the Nissan Qashqai 2.0?

The Nissan Qashqai 2.0 currently has 4 models on sale. Among them, the Qashqai 2022 2.0L CVT XV Prem. Luxury Edition, Qashqai 2022 2.0L CVT XV Prem. Pro Luxury Navigation Edition, and Qashqai 2022 2.0L CVT XV Smart Edition are equipped with a 2.0L 151-horsepower L4 engine, with an NEDC fuel consumption of 6.2L per 100km. The Qashqai 2022 2.0L CVT XV TOP Flagship Edition is equipped with a 2.0L 151-horsepower L4 engine, with an NEDC fuel consumption of 6.4L per 100km. Different models have different fuel tank capacities, and the distance that can be covered with a full tank of fuel is as follows: The Qashqai CVT version equipped with a 2.0L 151-horsepower L4 engine has a fuel tank capacity of 57L, and the distance that can be covered with a full tank is 57/6.2*100=919km. The Qashqai TOP version equipped with a 2.0L 151-horsepower L4 engine has a fuel tank capacity of 57L, and the distance that can be covered with a full tank is 57/6.4*100=890km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, or not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline to burn and perform work. Cars with greater weight will have higher fuel consumption because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures mean the engine block is colder, and the gasoline injected during a cold start does not vaporize easily, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.

11

0

Share

Where are Damai tires produced?

What are the reasons for frequent charging interruptions in the BYD Tang?

Under what circumstances should the Magotan S gear be used?

Which car brand has a snake logo?

What type of engine oil should be used for Citroen C5?

How to Read an Automotive Air Conditioning Pressure Gauge?

What is the normal fuel consumption for the Nissan Qashqai 2.0?

Where is the fuse box located in the Tiggo 3?

How to align the timing belt on a Skoda Octavia?

How to Conduct Annual Inspection for a New Car After One Year?

How to Solve the Engine Warning Light Issue on Baojun 730?