Where are car airbags installed?

1 Answers
TuckerDella
07/30/25 6:02am
Car airbags are installed in the following locations: 1. Inside the middle position of the steering wheel; 2. Under the dashboard on the passenger side; 3. On the side of the seat; 4. Hidden inside the roof lining. The airbag is an auxiliary configuration for passive vehicle safety, consisting of an airbag sensor, an anti-collision airbag, and an electronic control device. It needs to be used in conjunction with seat belts to provide effective collision protection for occupants. Precautions for using airbags include: 1. Maintain an appropriate distance from the airbag when riding; 2. Do not place items in front of, above, or near the airbag; 3. Keep a certain distance between the driver's chest and the steering wheel; 4. Do not alter the airbag system or its surrounding layout without authorization.
Was this review help?
20
5
Share
More Forum Discussions

What Causes Acceleration Shaking After Replacing Shock Absorbers?

Replacing shock absorbers causing acceleration shaking is due to: Damaged shock absorber: A normal shock absorber has a dry and clean exterior surface. If there is oil leakage, it indicates that the hydraulic oil inside the shock absorber has escaped from the upper part of the piston rod. In this case, the shock absorber is basically ineffective. Damaged shock absorber top mount: The front shock absorber top mount of a car is made of rubber material, and its main function is to assist the shock absorber and shock absorber spring in providing certain damping and cushioning effects. When the shock absorber top mount is damaged due to excessive wear, in addition to abnormal noises during operation, even if the shock absorber is not working, there will be abnormal noises when turning the steering wheel in place.
20
3
Share

What should be noted when replacing an external fuel filter?

When replacing an external fuel filter, the following precautions should be taken: Before replacement, depressurize the fuel system: The fuel system has internal pressure, and this pressure is quite high. If the fuel filter is removed without depressurizing the system, it may cause fuel to spray onto the body. Pay attention to the installation direction of the filter: When installing an external fuel filter, pay attention to the filter's connections, which usually have 2 or 3 ports. If there are 2 ports, one is connected to the fuel tank (inlet), and the other is the outlet. If there are 3 ports, there will be an additional port on the outlet side, which connects to the return line. The fuel filter will also have an arrow indicating the direction of fuel flow. Inspection of fuel system components: Components to be inspected include fuel lines and the fuel tank. Fuel lines play a role in transporting fuel within the system. If deformation or fuel leakage is found, they should be replaced promptly.
10
1
Share

Can a motorcycle battery still be used after being left unused for a year?

Motorcycle batteries cannot be used after being left unused for a year. Avoid storing in a discharged state: A discharged state refers to when the battery is not recharged promptly after use. The longer the battery remains idle in a discharged state, the more severe the damage will be. When the battery is not in use, it should be charged once a month to extend its service life. Regular inspection is necessary: During use, if the electric bike's range suddenly drops by more than ten kilometers in a short period, it is highly likely that at least one battery in the pack has issues such as broken cells, softened plates, or shedding of active material from the plates, leading to a short circuit. In such cases, it is advisable to promptly visit a professional battery repair facility for inspection, repair, or replacement.
3
3
Share

Why Is the Clutch of a Manual Transmission Car Stiff?

Manual transmission car clutch stiffness may be caused by clutch plate, clutch pressure plate, release bearing failure, or clutch master/slave cylinder malfunction. Clutch function: As the component directly connected to the engine in the automotive transmission system, it handles the engagement and disengagement of power and the transmission system. This ensures smooth vehicle starting, seamless gear shifting, and prevents transmission system overload. Friction clutch: Refers to a clutch that transmits torque through friction between driving and driven components. Widely used in modern vehicles. Hydraulic coupling: Refers to a clutch using fluid as transmission medium. Previously used in automatic transmissions, now rarely employed in automobiles. Electromagnetic clutch: Refers to a clutch operating through magnetic transmission, such as those used in air conditioning systems.
19
5
Share

What speed should the engine run at 2000 RPM?

When the engine is at 2000 RPM, the vehicle speed can generally reach around 80 km/h. Of course, the engine speed and vehicle speed are not in a one-to-one correspondence, as it also depends on the current gear, which is the transmission ratio. For new cars, the engine speed should not exceed 3000 RPM: Both excessively low and high RPMs are detrimental to engine break-in. The break-in period is divided into the initial, middle, and final stages, which is the process of forming an oxide protective film on internal engine components. Therefore, the quality of the break-in period directly affects the engine's lifespan in the long run. Generally, the first 500 km is the initial break-in period: It is advisable to keep the speed below 80 km/h and the RPM below 2200. The tire break-in period is 300 km, and since new tires lack optimal friction, driving should be cautious during this time.
2
1
Share

How many cylinders does a Kawasaki engine have?

Kawasaki is a four-cylinder engine. Company Profile: Kawasaki Heavy Industries, Ltd. is a Japanese heavy industry company. Kawasaki Heavy Industries originated during the Meiji Restoration era and focuses primarily on heavy industry. It has historical connections with JFE Steel (formerly Kawasaki Steel) and Kawasaki Kisen Kaisha (K Line). The company mainly manufactures aerospace products, railway vehicles, construction machinery, electric bicycles, ships, and mechanical equipment. Company Naming: "Kawasaki" is the Chinese transliteration, and its Romanized name is "KAWASAKI". The company is named after its founder, Shozo Kawasaki. Kawasaki Motorcycle Models: Kawasaki motorcycles can be divided into various series such as the Ninja series, Z series, VERSYS series, VULCAN series, W series, and KLX series.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.