When will the National VI emission standard be implemented in Hunan?

Can You Make a U-turn at Grid Lines?

Grid lines are areas where U-turns are permitted. These grid lines strictly prohibit all vehicles from parking, whether temporarily or for extended periods, to prevent traffic congestion. When there is a stationary vehicle ahead of a yellow grid line, the following vehicle must wait outside the yellow grid line until it is confirmed that there is sufficient space ahead to proceed safely. Other situations where U-turns are allowed include: Presence of U-turn signals or signs: At intersections with U-turn signals, a U-turn can be made when the U-turn signal is green. If there are U-turn signs or lane markings permitting U-turns, drivers may proceed with a U-turn while ensuring their own and others' safety. No U-turn signs but left turns are permitted (no prohibition of U-turns): At intersections where left turns are allowed and there are no signs or markings prohibiting U-turns, drivers can make a U-turn. It's important to note that the maneuver should not interfere with other vehicles and must comply with the left-turn signal. If there is a left-turn waiting area at the intersection, drivers can enter it when the straight-ahead signal is green and wait for the left-turn signal to turn green before making the U-turn. U-turns at dashed lines: U-turns are allowed at both white and yellow dashed lines. For double yellow lines where one side is dashed and the other is solid, U-turns are permitted on the dashed side if it is safe to do so. If the line on your side is solid, U-turns are not allowed. At intersections with such double lines, U-turns can be made on the dashed side, but drivers must not cross the stop line ahead.

14

4

Share

Should I get a B1 or B2 license first for large vehicles?

For the first time, you can apply for a B2 driver's license, while the B1 vehicle type requires an additional application. The specific details are as follows: 1. Apply for an A2 vehicle type at least three years after obtaining the B2 vehicle type: You must have held a license for medium-sized buses or large trucks for at least three years, or held a license for large buses for at least one year, and have no record of accumulating 12 penalty points in the last three consecutive scoring cycles before applying. 2. Apply for an A1 vehicle type at least five years after obtaining the B2 vehicle type: You must have held a license for city buses, medium-sized buses, or large trucks for at least five years, or held a license for tractor-trailers for at least two years, and have no record of accumulating 12 penalty points in the last five consecutive scoring cycles before applying.

8

2

Share

Do new cars still need to display the annual inspection sticker?

New cars do not need to display the annual inspection sticker. Vehicle owners can apply for, check, and use the electronic version of the vehicle inspection certificate through the Internet Traffic Safety Comprehensive Service Platform or the "Traffic Management 12123" mobile app. Vehicles that have already obtained the electronic inspection certificate do not need to display the paper version. Traffic police will verify the vehicle's inspection status through law enforcement terminals during traffic management. Additional information: Introduction to vehicle annual inspection: Vehicle annual inspection refers to a mandatory test for all vehicles that have obtained official license plates and registration certificates. It is equivalent to an annual physical examination for vehicles conducted in accordance with the "Technical Conditions for Motor Vehicle Operation Safety." Vehicle annual inspections help promptly eliminate potential safety hazards, encourage better vehicle maintenance, and reduce the occurrence of traffic accidents.

9

2

Share

What Causes Abnormal Noise in Car Brakes?

The reasons for abnormal noise in car brakes are as follows: 1. Use of low-quality or overly hard brake pads: If low-quality or overly hard brake pads are used, they will produce a squeaking sound when they rub against the brake disc during braking. Therefore, it is essential to use high-quality brake pads when replacing them. 2. Presence of sand or foreign objects between the brake pads and brake disc: During normal driving, it is inevitable to pass through some complex road conditions. Due to the unique design of disc brakes, some sand and foreign objects may get between the brake pads and brake disc, causing abnormal noise during braking. 3. Severe wear of the brake disc: For new cars, a slight squeaking sound during braking is normal. For older cars, the noise may be due to rust on the brake disc and brake pads.

16

3

Share

How to Adjust the Rearview Mirrors for Subject 2?

The following are the methods for adjusting the rearview mirrors for Subject 2: 1. Method 1: Take the right-side parking as an example. The car body should occupy half of the mirror, the rear door handle should be 1 cm below the upper edge of the mirror, and the front door handle should be about one-third from the lower edge of the mirror. 2. Method 2: Adjust the left mirror similarly, but the car body can occupy slightly more space. The rear door handle should be close to the upper edge of the mirror, ensuring you can see the left rear wheel without leaning out of the window. This facilitates observation during left-side parking and parallel parking. 3. Method 3: In the right-side rearview mirror, one-fourth of the car body should be visible, with the sky occupying one-third and the ground two-thirds. For the interior rearview mirror, the sky and ground should each occupy half. Ensure you can clearly see the situation behind the car through the window.

5

Share

What Can a 12-Volt Car Power Outlet Be Used For?

The 12V power outlet in a car can be used to connect external devices such as car phones, portable DVD players, phone chargers, laptops, digital cameras, car refrigerators, and camcorders. Its output voltage is 12V, and the current varies depending on the vehicle model. Below is an introduction to related information: 1. Power Supply Method: The car power outlet uses the car battery or cigarette lighter for power supply, converting low-voltage DC power to approximately 265V DC. It then converts the high-voltage DC power to 220V, 50Hz AC power. 2. Power Rating: Most vehicles have a maximum power rating of 120W. If an electrical device exceeds 120W, it may blow the fuse. For example, when charging a phone, the phone charger's output power is about 5W, and some may be slightly higher than 10W.

15

3

Share

When will the National VI emission standard be implemented in Hunan?

Can You Make a U-turn at Grid Lines?

Should I get a B1 or B2 license first for large vehicles?

Do new cars still need to display the annual inspection sticker?

What Causes Abnormal Noise in Car Brakes?

How to Adjust the Rearview Mirrors for Subject 2?

What Can a 12-Volt Car Power Outlet Be Used For?

What does EAP mean in cars?

Does the MG Dual-Clutch Transmission Fluid Need to Be Replaced?

What to Do If Someone Else Uses Your ETC?

How often should a family sedan undergo annual inspection?