When will the Highlander meet the China VI emission standard?

2 Answers
BradyFitz
07/24/25 7:42am
The Highlander models meeting the China VI emission standard were launched in 2019. Here is an introduction to the Highlander's China VI standard compliance: 1. Overview: As a large-sized SUV in Toyota's lineup, the Highlander features a spacious body and innovative, roomy interior. It also comes equipped with the highest standard safety features in its class as standard. 2. Advantages: The Highlander offers two powertrain options: a 3.5L V6 engine paired with a 5-speed automatic manual transmission, and a 2.7L L4 engine paired with a 6-speed automatic manual transmission. Both engines are equipped with Toyota's exclusive dual VVT-i technology, ACIS variable intake system, roller rocker arm structure, and other advanced technologies.
Was this review help?
15
2
Share
StEverett
08/11/25 3:24am
As a long-time Highlander owner, I've been closely following updates about this vehicle. The Highlander's China 6-compliant models were officially launched around July 2019, coinciding with the implementation of China 6 emission standards in key Chinese cities. The 2018 models were all China 5-compliant. I remember when I went to the 4S store for maintenance, the salesperson mentioned that all newly arrived vehicles had China 6 labels. This was mainly due to strict environmental policies - major cities like Beijing, Shanghai, Guangzhou, and Shenzhen implemented China 6 standards in July 2019, so manufacturers had to prepare in advance. When buying a used Highlander, pay special attention to this timeline: vehicles produced in the first half of 2019 might still be China 5-compliant, while those from the second half are mostly China 6-compliant. I recommend checking the vehicle's environmental information list for the most accurate details, as license plate registration policies vary significantly across different regions.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

How to Adjust a Car Pulling to the Right?

To adjust a car pulling to the right, follow these steps: 1. Prepare a wrench and turn the steering wheel fully to the right to expose the rear of the left front wheel; 2. Loosen the nut with the wrench, then turn the left control rod clockwise to shorten it; 3. Repeat the previous step by turning the steering wheel fully to the left to expose the rear of the right front wheel, loosen the nut with the wrench, and then turn the right control rod counterclockwise to extend it. The solution to a car pulling to one side is to perform a wheel alignment. Several tire-related issues can cause a car to pull to one side, such as incorrect wheel alignment, uneven tire wear, unequal tire pressure, or imperfectly round tire shapes.
7
3
Share

Where to Check a Car's Emission Standard?

The emission standard of a car can be found in the VIN code. The locations of the VIN code are: 1. Left side of the dashboard; 2. Lower left side of the windshield; 3. On the vehicle's nameplate; 4. On the body at the upper part of the right front shock absorber; 5. In the trunk area; 6. On the door hinge pillar, door lock pillar, or one of the door edges that connect with the door lock pillar. The VIN code refers to the Vehicle Identification Number, which consists of 17 characters and includes information about the vehicle's manufacturer, year, model, body type and code, engine code, and assembly location. The functions of the VIN code are: 1. To confirm the identity of the car; 2. For traffic violation inquiries; 3. To check the vehicle's batch; 4. To accurately locate parts.
14
0
Share

What is the headlight model of the Elantra?

The Elantra's headlights are divided into high beam and low beam. The low beam model is H7, and the high beam model is H11. Car headlights, also known as car front lights or car LED daytime running lights, serve as the eyes of the car, reflecting the owner's external image and are closely related to safe driving at night or in bad weather conditions. The Elantra is a compact 4-door, 5-seater sedan with a length, width, and height of 4610mm, 1800mm, and 1450mm respectively, and a wheelbase of 2700mm. It is equipped with a 1.4T turbocharged engine, delivering a maximum power of 95.6 kW and a maximum torque of 211 Nm. The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
2
0
Share

What Causes the Windshield to Not Be Cleaned Properly?

The reasons why the windshield cannot be cleaned properly are: 1. The wiper blades are aged; 2. The glass surface is corroded. A wiper is a blade structure installed in front of the windshield, composed of a motor, reducer, four-link mechanism, wiper arm spindle, and wiper blade assembly. Its function is to remove rain, snow, and dust that obstruct the view on the windshield. The method for removing and installing the wiper is: 1. Lift the metal wiper arm from the windshield and keep it stable in a position perpendicular to the windshield; 2. Press the buckle to remove the old wiper blade, separate it from the metal arm, then insert the new wiper and rotate it until the hook snaps into place and is secured; 3. Place the wiper back onto the windshield.
16
2
Share

How to Turn Off Daytime Running Lights?

To turn off daytime running lights, you can simply unplug their connector. Another method is to insert the car key, turn it to the first position, then activate the left turn signal while pulling the lever upward to turn on the high beams. Hold this position without releasing, then turn the key to the second position until you hear a beep. Daytime running lights are designed to make vehicles more noticeable during daytime driving. They are not illumination lights but rather signal lights. These lights enhance visibility and make vehicles more conspicuous. This technology, specifically developed for daytime use, is more direct and effective than conventional lighting devices.
14
2
Share

Which letter represents neutral gear in an automatic transmission car?

In an automatic transmission car, the neutral gear is represented by the letter N. Other gear positions include: 1. P for Parking; 2. R for Reverse; 3. D for Drive; 4. S for High-speed Engine Braking; 5. L for Low-speed Engine Braking. An automatic transmission refers to a system where the driver does not need to manually shift gears, as the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. The method for starting an automatic transmission car is: 1. Press the start button or turn the key to start the vehicle; 2. Press the brake pedal with your right foot and release the handbrake; 3. Shift the gear from P to D; 4. After shifting to D, gradually release the brake pedal with your right foot.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.