When will the China VI policy be implemented?

How to reset the tire pressure warning light on Changan CS15?

The method to reset the tire pressure warning light on Changan CS15 is: 1. Press the square icon button on the left side of the steering wheel to switch to the tire pressure monitoring screen; 2. Press the triangle icon button to perform the reset. The Changan CS15 is a 5-door, 5-seater compact SUV with body dimensions of 4135mm in length, 1740mm in width, 1630mm in height, and a wheelbase of 2520mm. It is equipped with a 1.5L naturally aspirated engine and a 5-speed manual transmission, delivering a maximum power of 78.5 kW and a maximum torque of 145 N·m. The drivetrain is front-wheel drive, with a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.

1

0

Share

What Are the Process Steps for Complete Automotive Painting?

Automotive painting generally follows these process steps: 1. Dust removal and cleaning: First, use an air gun to blow away dust particles on the vehicle body, then use a silicone remover to clean stains, followed by blowing dust out of body gaps with the air gun, and finally use a tack cloth to remove fine dust. 2. Base coat application for solid colors: Apply 2-3 coats with 5-10 minutes between layers, adding hardener and thinner according to temperature. 3. Color coat application: Apply 2-3 coats of solid color, metallic, or pearl paint with 5-10 minutes between layers. 4. Clear coat application: Mix and apply two layers of clear coat with 5-10 minutes between layers, adding hardener and thinner as needed based on temperature. 5. Baking: Let stand for 5-10 minutes, then bake at 60°C for 30 minutes. Drying stages should be checked - if slightly sticky to finger touch, it's surface dry; if no fingerprint remains with light touch, it's semi-hard dry; if no mark remains under firm pressure, it's fully cured.

13

1

Share

Is a tire pressure of 1.9 bar normal for a sedan?

A tire pressure of 1.9 bar is not normal for a sedan. Generally, sedans use standard tires, and according to the international GBT2978-2008 standard, the recommended tire pressure for standard tires is 2.4-2.5 bar. A pressure of 1.9 bar is below the minimum recommended value, so it is not normal. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes the steering wheel to feel heavy and increases the risk of veering, which are factors detrimental to driving safety; Increases the movement of various parts of the tire, leading to excessive rolling and abnormal heating of the tire; Reduces the functionality of the cords and rubber, potentially causing delamination or cord breakage, and excessive friction with the rim, leading to damage and abnormal wear at the bead area; Multiplies the friction between the tire and the ground, causing a sharp rise in tire temperature, softening the tire, and drastically reducing its strength. High-speed driving under such conditions may lead to a blowout; Increases tire body deformation, making the tire sidewalls prone to cracking and inducing flexing movements, which lead to excessive heat generation, accelerating rubber aging, fatigue of the cord layers, and cord breakage. It also increases the tire's contact area with the ground, accelerating wear at the tire shoulders.

18

0

Share

What Type of Engine Oil Should an Arrizo 5 Use?

Arrizo 5 originally uses SM grade 10W-40 engine oil. Below is extended information regarding engine oil selection for the Arrizo 5: 1. As an economical model, semi-synthetic engine oil is the preferred choice. The Arrizo 5's engine does not have specific brand requirements for engine oil, as long as it meets the specifications. If the local temperature is lower, switch to 5W-40 grade engine oil. 2. Fully synthetic engine oil can also be used, as it offers better performance, resulting in lower engine noise and wear, though the oil change interval will be shorter. 3. It's important to note that the choice between fully synthetic and semi-synthetic engine oil applies to naturally aspirated engines. For turbocharged engine versions, only fully synthetic engine oil should be used.

1

0

Share

When Can I Get the Vehicle Registration Certificate?

You will receive the motor vehicle registration certificate at the same time as obtaining the vehicle license when successfully registering a new car or transferring ownership of a used car. Here is some information about the vehicle registration certificate: 1. The "Vehicle Registration Certificate" is the legal proof of vehicle ownership, kept by the vehicle owner and not carried with the vehicle. 2. It must be presented for any subsequent vehicle registration procedures, such as transfer or change of ownership, and records the vehicle's details, serving as the vehicle's "household register." Additional information: Methods for verifying the vehicle registration certificate: 1. Check whether the owner's ID matches the documents used when applying for the motor vehicle registration certificate, including the ID number, to confirm if it is a first-hand vehicle. 2. Review the "Domestic/Import" section on the motor vehicle registration certificate: Pay attention if it contains terms like "import," "customs confiscation," "industrial and commercial penalty confiscation," or "overseas self-brought," as these may affect the vehicle's selling price. 3. Check the "Usage Nature" section to see if it is marked as "commercial" or "non-commercial." If it is commercial, take note and promptly inform the pricing center. 4. Check if there is any mortgage loan. To release the mortgage, the owner must contact the loan bank; otherwise, the transfer cannot proceed. 5. For the initial application of the motor vehicle registration certificate, an agent can handle it, but the original ID of the owner is required. For a lost certificate replacement, the owner must be present in person. The motor vehicle registration certificate is generally processed at the vehicle management office, with a collection time of three working days.

6

2

Share

What is the cause of the abnormal noise in the Excelle transmission?

The causes of abnormal noise in the Excelle transmission are: 1. Bearing wear and damage; 2. Abnormal gear meshing clearance; 3. Gear tooth surface metal peeling, tooth breakage, or assembly misalignment; 4. Insufficient lubrication due to lack of lubricating oil; 5. Transmission water ingress; 6. Loose housing bolts; 7. Excessive clearance between the shift lever and the shift fork groove in the manual transmission; 8. Long-term failure to replace transmission oil. The Excelle is a 4-door, 5-seater compact sedan with body dimensions of 4468mm in length, 1765mm in width, 1469mm in height, and a wheelbase of 2611mm. It is equipped with a 1.3L naturally aspirated engine and a 5-speed manual transmission.

3

5

Share

When will the China VI policy be implemented?

How to reset the tire pressure warning light on Changan CS15?

What Are the Process Steps for Complete Automotive Painting?

Is a tire pressure of 1.9 bar normal for a sedan?

What Type of Engine Oil Should an Arrizo 5 Use?

When Can I Get the Vehicle Registration Certificate?

What is the cause of the abnormal noise in the Excelle transmission?

Is the Transmission of Mazda Models Made by Aisin?

Is the Volkswagen Tiguan L produced by FAW-Volkswagen or SAIC Volkswagen?

How to Adjust the Q5 Steering Wheel?

How to Check the Oil Level on an Audi A4?