When will China VI emission standards be implemented in Guangdong Province?

How to activate the one-touch window function on the Changan CS55?

The activation method for the one-touch window function on the Changan CS55: Press the button twice consecutively - a short first press, then hold down the second press without releasing to lower the window (no need for prolonged pressing). Continuous long pressing may deactivate the one-touch window setting. On the door panel buttons, 'AUTO' controls one-touch up/down, while 'AUTODOWN' only operates one-touch lowering. The Changan CS55 measures 4500mm in length, 1855mm in width, and 1690mm in height, with a wheelbase of 2650mm. It is equipped with a 1.5T turbocharged engine paired with a 6-speed manual transmission, delivering maximum power of 115kW and peak torque of 225Nm.

4

2

Share

What are the differences between the Mercedes-Benz S-Class and the Maybach S-Class

The differences between the Maybach S-Class and the Mercedes-Benz S-Class are as follows: 1. Different positioning levels The starting price of the Mercedes-Benz S-Class is half that of the Maybach. Therefore, the positioning of the two is different. The Maybach S-Class is significantly higher than the Mercedes-Benz S-Class, occupying a position between luxury and ultra-luxury. 2. Different body lengths The Maybach S-Class is longer than the Mercedes-Benz S-Class. Additionally, in terms of wheel design, the Maybach is very unique, featuring the so-called "big pie" wheels in its top configuration. 3. Different prices The Mercedes-Benz S-Class starts at 806,000 RMB, while the lowest price of the Maybach S-Class is around 1.4 million RMB. The price difference between the two series shows that the Maybach costs about half more than the Mercedes-Benz S-Class, which also largely reflects that the Maybach S-Class is several grades higher than the Mercedes-Benz S-Class.

3

5

Share

Is Installing a Rear Spoiler on a Car Considered Illegal?

Adding a rear spoiler is considered an illegal act and falls under unauthorized vehicle modifications. Below is an introduction regarding illegal modifications: 1. Penalties: Driving a vehicle with illegal modifications on public roads will result in the vehicle being impounded by the traffic management department of the public security authorities, the illegal equipment being confiscated, the vehicle being ordered to be restored to its original condition, and a fine imposed according to the law. 2. Regulations: Vehicles with illegal modifications will not be issued a safety technical inspection compliance mark by the traffic management department of the public security authorities. If the act constitutes a violation of public security management, the public security authorities will impose penalties such as fines or detention in accordance with the relevant provisions of the "Public Security Administration Punishment Law." When modifying your beloved car, it is essential to apply for a modification registration with the traffic management department of the public security authorities to ensure the vehicle can pass annual inspections and routine safety checks after the modifications.

18

1

Share

Should a Nail-Punctured Tire Be Repaired or Replaced?

Tire puncture caused by a nail can be either repaired or replaced depending on the extent of damage. Here are the solutions for a punctured tire: 1. Tire Repair: When the puncture hole on the tread is only 6mm, tire repair is an option. Since a nail puncture does not severely damage the tire's structure—only piercing through the steel belts, fabric layers, and polyester layers—repairing it is sufficient. However, for enhanced safety, it's advisable to replace the tire and use the damaged one as a spare. 2. Tire Replacement: If the tread is deformed or the tire body is severely damaged, the tire must be replaced. Tread deformation is actually caused by damage to the tire body. When the tire body undergoes significant stress, its internal structure is compromised, leading to deformation. At this point, the tread also deforms, indicating the end of the tire's lifespan.

10

2

Share

Is Replacing Valve Stem Seals Considered a Major Overhaul?

Replacing valve stem seals is not considered a major overhaul. However, if the engine cylinder head is disassembled to replace the valve stem seals, then it would be classified as a major overhaul. It is recommended that car owners use non-disassembly cylinder replacement technology to replace valve stem seals. Under any circumstances, try to avoid opening the engine cylinder head. The valve stem seals are located on the valves and are made of rubber material. After prolonged use, this component may experience reduced elasticity. Valve stem seals are typically composed of an outer frame and fluororubber vulcanized together, with a self-tightening spring or steel wire installed at the radial opening. They are used to seal the engine valve guide rods and are a type of oil seal. They prevent engine oil from entering the intake and exhaust pipes, which could lead to oil loss. Additionally, they prevent the leakage of the gasoline-air mixture and exhaust gases, as well as prevent engine oil from entering the combustion chamber.

20

2

Share

What are the Precautions for Buying and Transferring Used Cars?

Precautions for buying and transferring used cars include: 1. Annual inspection: Check the supplementary page of the vehicle license (driving license) to confirm whether the vehicle has undergone normal annual inspection. If it hasn't, the transfer procedure cannot be processed. 2. Exhaust emission certificate: Verify if there is an exhaust emission certificate. If not, not only will it need to be reissued during the next inspection, but there may also be fines, causing losses to the buyer. 3. Name change: After the vehicle is transferred, promptly update the insurance policy with the new owner's name. Otherwise, disputes with the insurance company may arise in case of an accident. 4. Sales contract: Sign a standardized sales contract during the transaction. Since there are many details to consider in used car transactions and transfers, and many aspects are easily overlooked, it is recommended that both parties sign a standardized sales contract issued by the industrial and commercial administration department to protect the legitimate rights and interests of both the buyer and the seller.

5

4

Share

When will China VI emission standards be implemented in Guangdong Province?

How to activate the one-touch window function on the Changan CS55?

What are the differences between the Mercedes-Benz S-Class and the Maybach S-Class

Is Installing a Rear Spoiler on a Car Considered Illegal?

Should a Nail-Punctured Tire Be Repaired or Replaced?

Is Replacing Valve Stem Seals Considered a Major Overhaul?

What are the Precautions for Buying and Transferring Used Cars?

Can a C1 License Drive Blue Plate Trucks?

How many kilometers can the Verna run when the fuel gauge flashes?

Which symbol on the car is for defrosting the windshield?

How is the compensation for vehicle damage insurance calculated?