When will China implement the National VI emission standards nationwide?

1 Answers
BradleyLee
07/29/25 5:12pm
China will implement the National VI emission standards nationwide in 2023. Here are the relevant details: 1. Timeline: The implementation of the National VI standards will be divided into two phases: "National VI a" and "National VI b", with corresponding effective dates of July 1, 2020, and July 1, 2023, respectively. In fact, National VI a is only a transitional phase from National V to National VI, and the full implementation of the National VI emission standards will take place in 2023. 2. Notes: Some models listed as compliant with the National VI emission standards are already on the market, newly launched, or about to be launched. Among them, the already available models are those currently on sale in the market that meet National VI standards, while newly launched models may not yet be widely available for purchase. Upcoming models refer to those that will soon be released in compliance with the emission standards. The implementation of National VI standards for heavy-duty trucks and medium/light-duty trucks is progressing in an orderly manner, with annual penetration rates gradually increasing. According to policy requirements, relevant models will fully transition to National VI B by 2023.
Was this review help?
19
5
Share
More Forum Discussions

What are the effects of high altitude on a car?

High altitude mainly has the following effects on a car: 1. Impact on the car engine cooling system: The higher the altitude, the lower the atmospheric pressure, and the boiling point of liquids decreases with the reduction in pressure. Therefore, the boiling point of the engine coolant decreases, and the engine cooling system is prone to 'boiling over.' 2. Impact on the car's acceleration performance and fuel economy: As altitude increases, atmospheric pressure gradually decreases, and air density becomes smaller, leading to reduced engine air intake and decreased power. For every 1000m increase in altitude, atmospheric pressure drops by approximately 11.5%, air density decreases by about 9%, and car power decreases by around 10%.
20
4
Share

Where is Hanteng Auto produced?

Hanteng Auto is a domestic car produced in Jiangxi. Here is an introduction to Hanteng Auto: 1. Hanteng Auto is a private vehicle manufacturing enterprise focused on the R&D, production, and sales of traditional power vehicles, new energy vehicles, and key automotive components, possessing complete independent intellectual property rights. 2. The classic model of Hanteng Auto is the Hanteng X7, which is equipped with two engines: one with the code name 15S4G, a 1.5T turbocharged engine; and another with the code name 4G63S4T, a 2.0T turbocharged engine.
7
2
Share

Introduction to Skoda Automatic Transmission Gear Positions

The R gear, also known as the reverse gear, is used when the vehicle needs to move backward. When the gear lever is in the R position, the hydraulic system's reverse gear circuit is engaged, causing the drive wheels to rotate in reverse, enabling the vehicle to move backward. To operate, you must press the brake and the gear lock on the gear lever before moving it to the R position. It's important to note that you should not force the gear lever into the R position when the vehicle has not come to a complete stop, as this can damage the transmission. The P gear, or parking gear, is used when the vehicle is parked for an extended period. It locks the rotating parts of the vehicle's transmission mechanically, preventing the vehicle from moving. Like manual transmission vehicles, automatic transmission vehicles also have a handbrake function. However, unlike manual transmission vehicles, automatic transmission vehicles require you to engage the handbrake first before shifting into the P gear; otherwise, the mechanical parts of the automatic transmission may be damaged. The N gear is the neutral gear, used for short stops without turning off the engine, such as when waiting at a traffic light or in traffic. When the N gear is engaged, the engine's power is not transmitted to the wheels, and pressing the accelerator will not move the vehicle. The D gear, also known as the drive gear or forward gear, automatically shifts gears based on throttle opening and vehicle speed data when the gear lever is in the D position. This gear is suitable for normal road driving, where the driver controls the vehicle's speed by adjusting the accelerator pedal.
4
0
Share

Why was the Mercedes-Benz E200 discontinued?

Mercedes-Benz E200 was discontinued due to weak high-speed power, excessive noise and poor sound insulation, and the third-row seats being virtually useless. Below is an introduction to related Mercedes-Benz content: Mercedes-Benz SAM: The control unit, which stands for Signal Acquisition and Actuation Module. If the SAM malfunctions, components such as headlights, turn signals, and wipers cannot be controlled while driving, posing a safety hazard. Mercedes-Benz: A German automobile brand, considered one of the most successful premium car brands in the world. It is renowned for its perfect technical level, stringent quality standards, innovative capabilities, and a series of classic coupe models. The Mercedes three-pointed star has become one of the most famous car and brand logos in the world. Mercedes-Benz cars not only have unparalleled quality but also a comprehensive range of models. Currently, it mainly produces A-Class cars, C-Class cars (mid-range sedans and coupes), E-Class cars (high-end sedans and coupes), S-Class cars (luxury sedans and coupes), and G-Class cars (SUV off-road vehicles).
16
4
Share

What is the length of the Mercedes-Benz C200L in meters?

The length of the Mercedes-Benz C200L is 4783mm. Below is an introduction to the related content of the Mercedes-Benz GLC: Dimensions: The Mercedes-Benz GLC has a length, width, and height of 4764mm, 1898mm, and 1642mm respectively; the BMW X3 has a length, width, and height of 4717mm, 1891mm, and 1689mm respectively. Transmission: The Mercedes-Benz GLC is equipped with a 9-speed automatic transmission; the BMW X3 is equipped with an 8-speed automatic transmission. Engine: The Mercedes-Benz GLC is powered by a 2.0T turbocharged engine; the BMW X3 is powered by a 2.0T turbocharged engine. The Mercedes-Benz GLC has a maximum power of 145kw and a peak torque of 320nm; the BMW X3 has a maximum power of 135kw and a peak torque of 290nm.
12
4
Share

What is the actual wading depth of the Equinox?

The actual wading depth of the Equinox is 500mm. The wading depth of the Equinox is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Equinox is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause serious damage to the engine's mechanical structure (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in water, which could cause severe damage due to water ingress. Judge the underwater road conditions based on the passage of vehicles ahead and choose a suitable entry point. Observe the path taken by other vehicles and follow their tracks at a low speed, avoiding sudden acceleration or deceleration. On roads prone to waterlogging, observe warning water level markers, trees, and reference points such as the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the tire height or the engine's air intake, do not attempt to drive through; instead, choose an alternative route.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.