···
Log in / Register

When Will Beijing Implement China VI Emission Standards?

4 Answers
CourtneyLee
07/28/25 8:22am
Beijing plans to implement the China VI emission standards starting from July 1st. Below is an introduction to the China VI emission standards: 1. According to previous announcements from the Ministry of Industry and Information Technology, the China VI emission standards will be implemented in two phases: "China VI a" and "China VI b." Undoubtedly, "China VI b" is more stringent than "China VI a." The China VI emission standards represent a 40%-50% improvement over the China V standards, surpassing even the Euro VI standards and aligning with U.S. levels, making them among the strictest emission standards globally. 2. Even in Europe, emission standards are not as stringent. The Euro VI standards allow for carbon monoxide emissions of no more than 1g per kilometer, nitrogen oxides no more than 0.06g, and particulate matter no more than 0.005g for passenger cars. In contrast, the China VI standards set these limits at 0.5g, 0.035g, and 0.003g, respectively, making them roughly twice as strict as Euro VI. For China V emission vehicles purchased within the specified period or transferred from other provinces to Beijing, vehicle registration can still be processed within one month after the implementation date of the new standards. Registrations will not be processed after this deadline.
Was this review help?
1
0
Share
MacRobert
08/11/25 3:16pm
I've lived in Beijing for several years, and as an ordinary car owner, I remember the day when the China 6b emission standard was officially implemented on July 1, 2019, which had a significant impact on us. During that period, you had to be careful when buying a car—only vehicles meeting the new standard could be registered, while the sale of older China 5 vehicles was stuck, and their value in the second-hand market plummeted. Looking back now, the improvement in Beijing's air quality is noticeable. China 6 cars have lower emissions and are more fuel-efficient. The government pushed the standard early to prepare for the Winter Olympics. If anyone is planning to change cars in Beijing, I recommend checking the emission level early—China 6 cars are more cost-effective in the long run, and maintenance isn't troublesome either.
Was this review help?
17
1
Share
Expand All
LaPhoebe
09/28/25 3:05am
I've always been concerned about the environment. Beijing's implementation of the China 6b emission standard in 2019 was the right move. Air pollution has long been a prominent issue in Beijing, and China 6 vehicles can significantly reduce PM2.5 and nitrogen oxide emissions, which brings great health benefits. I've seen the data showing fewer smoggy days after the standard took effect. This policy pushes automakers to upgrade their technologies while allowing citizens to participate, such as by driving less or using public transport more often. The China 6 standard is internationally leading, and Beijing taking the initiative demonstrates its commitment to environmental protection, encouraging everyone to support green transportation.
Was this review help?
13
3
Share
Expand All
LaAlexis
11/11/25 5:01am
I know a bit about automotive technology, and the implementation of China 6b in Beijing in July 2019 was truly impressive. The standards are extremely stringent, requiring upgrades like particulate filters and OBD systems for new vehicles to be road-legal. While other regions lagged behind, Beijing took a leap forward, significantly improving both power performance and fuel efficiency. As a tech enthusiast, I believe this pushes automakers to innovate, such as enhancing three-way catalytic converters. Ordinary drivers might not notice drastic changes, but engine noise has reduced slightly. With proper regular maintenance, the costs remain manageable.
Was this review help?
8
5
Share
Expand All
More Forum Discussions

What to Do If Your Driver's License Inspection Period Has Expired?

If your driver's license inspection period has expired for less than a year, you can still proceed with the annual inspection and renewal as usual. However, if it has been expired for more than a year, the license will be revoked. Below are the details regarding the annual inspection of a driver's license: 1. The annual inspection of a driver's license is conducted when renewing the license upon its expiration. Vehicle owners can initiate the process up to three months before the expiration date. 2. The annual inspection includes: (1) Review of traffic violations and accident handling records. (2) Assessment of physical condition. (3) Review of traffic violation points and participation in required study and exams if 12 points are accumulated. 3. Drivers holding licenses for large buses, trailers, city buses, medium-sized buses, or large trucks must undergo an annual inspection at the traffic management department of the public security authority within 30 days after the end of each scoring cycle (i.e., annual inspection). If there are no points recorded during a scoring cycle, the inspection for that cycle is waived.
18
1
Share

Where to Find the Year on a Tire?

The manufacturing date of a tire is marked on its sidewall. Tire manufacturers use a four-digit number to represent the production date, where the first two digits indicate the week of production and the last two digits indicate the year. Here is some information about tires: 1. Tires are a crucial component of a vehicle, affecting its driving stability and safety. 2. Tires are made of rubber, and rubber products can age over time with prolonged use. Tires need to be replaced periodically; under normal conditions, tires installed on a vehicle can last for four years.
8
3
Share

What Causes High Engine RPM?

High engine RPM is mainly caused by the following reasons: 1. Poor fuel quality: If the fuel used in the vehicle is of low quality, it cannot effectively mix with air and combust in the engine cylinders, leading to abnormal engine operation, which may result in symptoms of high engine RPM. 2. Personal tuning: To prevent manual transmission vehicles from stalling during startup, the engine RPM can be manually increased. 3. Exhaust system malfunction: When a vehicle has severe carbon buildup, it can cause issues in the exhaust system, resulting in insufficient exhaust and an increase in engine RPM.
12
1
Share

What are the benefits of installing exhaust tips on a car?

Installing exhaust tips on a car mainly serves the following purposes: 1. The primary function of adding exhaust tips is still for aesthetic enhancement. 2. Generally, the design of the original car's exhaust pipe tips is relatively plain. Over prolonged use, the accumulation of mud, rust, and carbon particles can make the original exhaust tips quite unsightly. In contrast, many aftermarket exhaust tips are made of chrome-plated metal, featuring exquisite appearances that provide significant decorative effects. 3. Of course, certain specialized exhaust tips serve specific purposes, such as those that can alter the exhaust sound and those used on special vehicles like oil tankers, which have fire safety functions.
11
5
Share

What does parking mean?

Parking means stopping the vehicle. Many cars nowadays are equipped with automatic parking. The following introduces automatic parking: 1. Automatic parking, also known as AUTO-HOLD, refers to an automatic braking function. After activating this function, for example, when stopping at a traffic light, there is no need to pull the handbrake. It simplifies the operation by avoiding the use of the handbrake or electronic handbrake, and automatic transmission models do not need to frequently switch between D to N or D to P. 2. AUTO-HOLD relies on an intelligent braking system, and only vehicles equipped with brake control systems like ESP can implement the AUTO-HOLD function.
7
5
Share

What Items Are Required for Car Maintenance?

Here is a detailed introduction to car maintenance items: 1. Engine oil and oil filter replacement. This primarily involves maintenance of the lubrication system, whose main function is to effectively lubricate various components of the car engine to prevent excessive wear. The oil filter's role is to remove impurities from the engine oil, ensuring the proper functioning of the lubrication system. The oil filter should be replaced along with the engine oil during an oil change. Under normal circumstances, a car requires maintenance every 5,000 kilometers. 2. The air filter's function is to filter the air before it enters the cylinders, removing impurities such as dust, sand, and other foreign particles. The cleaning and maintenance of the air filter depend on the usage environment. The gasoline filter is typically replaced after driving 20,000 to 25,000 kilometers. 3. Spark plugs are consumable parts and should be replaced every 20,000 kilometers. Additionally, components such as brake fluid, transmission fluid, the battery, throttle body, fuel injectors, and brake pads are all inspection items during routine maintenance, and their maintenance depends on usage conditions.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.