···
Log in / Register

When will Beijing implement China 6 emission standards?

5 Answers
MacPaul
07/28/25 11:39pm

Beijing implemented the China 6 emission standards on January 1, 2020. Currently, the country divides the "China 6 standards" into two phases: "China 6a" and "China 6b", with plans to implement them nationwide uniformly in 2020 and 2023 respectively. Here is some relevant information about the China 6 emission standards: 1. The China 6 standards, officially known as the "National Sixth Stage Emission Standards for Motor Vehicles", were established to enforce environmental protection laws, reduce and prevent pollution from vehicle exhaust, protect the ecological environment, and ensure human health. 2. The China 6 standards were issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection and Quarantine on December 23, 2016, and June 22, 2018, respectively. The "Limits and Measurement Methods for Emissions from Heavy-Duty Diesel Vehicles (China VI)" came into effect on July 1, 2019. The implementation of the China 6 standards imposes stricter requirements on emissions such as carbon monoxide, nitrogen oxides, and hydrocarbons.

Was this review help?
20
2
Share
Tammy
08/12/25 2:56am

Beijing's China VI emission standard was officially implemented on July 1, 2019, specifically the more stringent China VI-b phase, directly skipping the relatively lenient China VI-a, demonstrating Beijing's leading role in environmental policies. As an ordinary citizen concerned about urban air quality, I personally experienced a noticeable reduction in street-level exhaust emissions during that period, with significantly fewer smoggy days. This is closely related to the China VI standard's strict limits on nitrogen oxide and particulate matter emissions. When purchasing new vehicles, we had to choose those with the China VI label, while China V vehicles were gradually phased out. Although the cost didn't change much for car owners, long-term respiratory health benefits were secured. Beijing adopted this approach due to significant urban pollution pressure. I anticipate that emission standards will become increasingly stringent in the future, with other cities nationwide following suit. This greatly contributes to building greener cities, making everyone feel more at ease when going out. I recommend stronger support for the transition to new energy vehicles.

Was this review help?
8
0
Share
Expand All
Georgia
10/01/25 6:06am

I've been driving for over 20 years and still remember when Beijing's China VI emission standard was implemented in July 2019. This was a hot topic among veteran drivers. After China VI-b took effect, the emission requirements became much stricter than China V - with tighter controls on carbon monoxide and hydrocarbons, which forced me to carefully reconsider my vehicle choice during replacement. Otherwise, my old car might face urban area restrictions. The market saw massive clearance sales of China V vehicles, and my friend's car dealership boomed while used car values plummeted. From an environmental perspective, reduced exhaust pollution has gradually improved Beijing's air quality. For frequent drivers like us, this brings tangible benefits - saving on maintenance costs while protecting our health. The key is not to wait until policy changes force a rushed vehicle upgrade.

Was this review help?
11
4
Share
Expand All
SanNora
11/14/25 7:53am

Beijing implemented the China VI-b emission standards on July 1, 2019, requiring all newly sold vehicles to comply, which is a highlight for tech enthusiasts. The China VI-b standard enhances exhaust monitoring systems, such as optimizing engine combustion efficiency and reducing nitrogen oxide emissions, making vehicles cleaner than China V models. When purchasing a car post-implementation, pay attention to the emission certification label to avoid mistakes. Technically, it includes real-time diagnostic functions to ensure automatic alerts for exceeding limits. I believe this is effective for environmental improvement, reducing pollution in Beijing. Future cars may become more intelligent, so it's advisable to check configurations before buying.

Was this review help?
8
0
Share
Expand All
LaAdam
01/05/26 2:44am

As a mother concerned about children's health, I learned from the news that Beijing implemented China 6 emission standards in July 2019. The strict China 6b standards require significant reductions in pollutants like sulfur dioxide, which improves air quality and reduces respiratory issues. I feel much less worried about smog when taking my kids out for walks now. When buying new cars, we must choose China 6 certified models - our family switched to a low-emission vehicle last year and the difference is noticeable. The policy has made families more cautious about car purchases, but in the long run it protects our health and saves medical expenses. I hope this trend continues to make urban living more livable.

Was this review help?
5
0
Share
Expand All
More Forum Discussions

Why does the Volkswagen car keep beeping when reversing?

There is something stuck to the radar or a signal error. Specific reasons: Something is stuck to the reversing radar probe, causing signal blockage; The rear wiper water pipe is leaking or has seeped into the reversing radar system; The radar ultrasonic signal is faulty, causing false alarms; The reversing radar circuit is short-circuited or the radar module is malfunctioning. Solutions: Check if there is anything blocking the radar holes at the rear of the vehicle. Seal the leak (or replace the pipe) and drain any accumulated water in the radar system. Restart the engine, drive the vehicle to an open area, and try reversing again to observe the result. Take the car to a 4S shop or repair shop for inspection, checking the circuit or replacing the radar module.
15
2
Share

How to Open the Trunk of an Older Model CR-V?

For the Honda CR-V, if you don't use the remote to open the trunk, there is a lever at the lower left corner of the driver's side door. Simply lift this lever to open the trunk. Here are some specific details about the Honda CR-V: 1. The Honda CR-V offers a very spacious interior, with official data indicating 524 liters. During actual experience, the area indeed appears very large, especially in terms of depth. 2. The CR-V has a wheelbase of only 2620mm, and the passenger space inside can be described as just adequate: a passenger who is 1.7 meters tall can sit in the front seat with nearly two fists of space between their head and the roof; the rear headroom is slightly reduced to about one fist, while legroom allows for two fists of movement space. Additionally, the rear seats can be adjusted forward or backward as needed to modify trunk capacity, which is quite practical. 3. The trunk has a capacity of 524 liters, which can be expanded to 955 liters by folding down the rear seats.
9
1
Share

Where to Get Maintenance for Sehol?

Sehol should be taken to a 4S shop for maintenance. Car Maintenance: According to the different maintenance conditions required by different materials in various parts of the vehicle, special care materials and products of different properties are used to carry out a brand-new maintenance process for the car. Modern car maintenance mainly includes the maintenance scope of the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. Precautions: Check the oil dipstick regularly, add oil in time if it is insufficient, check whether the water in the water tank is missing, check the brake fluid, do not use idling to preheat the engine when driving, and do not drive the engine at high speed when driving.
7
0
Share

Where is the wiper fuse located on the BMW X1?

The wiper fuse of the BMW X1 is located inside the glove compartment on the passenger side. Rotate the cover in the direction of the downward arrow to access the fuse. Fuse: Vehicle electrical equipment such as lights, horn, starter, and air conditioning all require fuse protection. Otherwise, if the current in the circuit becomes too high, the electrical appliances may burn out. The fuse serves a protective function. Fuse replacement: Turn off the engine and power equipment, locate the corresponding position, and use a small pry bar to open the protective cover. Component information can be seen inside the fuse box. Use a light or a test pen to perform a preliminary inspection of the fuse. If it is confirmed to be blown, consider replacing it. Only use a fuse with a similar current rating and size for replacement.
11
1
Share

What to do when the Malibu shows 'not in P gear' after turning off the engine while in P gear?

If this situation occurs despite following the correct operational procedures, you can go to a 4S dealership to replace the car if it is still under warranty. Here is some extended information: 1. The four gears of an automatic transmission are P gear, R gear, N gear, and D gear. P gear refers to the parking gear; the brake allows the braking system to bear most of the force, and then you can shift into P gear to prevent this situation from happening. R is the reverse gear, which should be engaged when reversing. N is the neutral gear, which can be used for short-term parking. D is the driving gear. 2. The correct method for parking an automatic transmission vehicle is to first press the foot brake to stop the vehicle, then shift the gear from D to N, engage the handbrake, release the foot brake, and turn off the engine. When turning off the engine, do not immediately turn off the power. The purpose is to confirm whether the vehicle is completely stationary under the handbrake. Then, press the foot brake again, shift the gear from N to P, release the foot brake, and turn off the power to remove the key. This is the most reliable and safest parking method. Although it sounds troublesome, it is the least damaging to the car.
7
4
Share

What does Volkswagen's Coming Home Mode mean?

Coming Home Mode refers to the vehicle's front lighting system providing illumination for the owner when returning home. After parking and locking the vehicle, the headlights remain on for a period of time to light the way home. Below are related details: 1. In addition to Coming Home Mode, there is also Leaving Home Mode, where the headlights turn on upon receiving the remote unlock signal to illuminate the path to the vehicle. 2. Coming Home Mode allows the headlights to stay on for a set duration after the engine is turned off, as if the car is seeing you home. After this period, the lights automatically turn off. Enabling this function means that when you leave early in the morning while it's still dark, the headlights will illuminate upon remote unlocking. 3. The Coming Home function requires the light switch to be set to automatic sensing mode (the second position) while driving. This function is mainly noticeable at night, as it is not apparent during the day. However, at night with the lights in automatic sensing mode, after turning off the engine and closing the door, the lights will delay turning off according to the preset duration.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.