When was the inspire launched?

What Issues Should Be Paid Attention to When Buying a Car?

When buying a car, the following issues should be paid attention to: 1. Purchase invoice: The purchase invoice is the most important proof when buying a car and is also one of the documents required for vehicle registration. Therefore, be sure to obtain the purchase invoice from the dealer and confirm its validity. 2. Vehicle certificate: The certificate is another important document for the car and is essential for vehicle registration. Only cars with a certificate meet the national requirements for motor vehicle equipment quality and related standards. 3. Warranty service card: According to relevant regulations, if a car experiences failures or damages due to manufacturing quality issues within a certain period and mileage, the manufacturer's free service can be availed with the warranty service card. 4. Vehicle user manual: Users must use the vehicle reasonably according to the requirements in the user manual. The manufacturer is not responsible for the warranty if vehicle damage is caused by not following the instructions in the manual. 5. Check the nameplate: Verify the displacement, manufacturing date, chassis number, and engine number on the nameplate. The numbers on the certificate must match the engine number and chassis number on the car.

14

2

Share

What is the appropriate tire pressure for an Audi Q5?

Audi Q5's normal tire pressure range is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and decreased by 0.1bar in summer. This data is based on the international GBT2978-2008 standard requirements. Method to check tire pressure in Audi Q5: Start the car and enter the interior; locate the central display screen inside the car and touch the left CAE button; enter the vehicle settings menu, select the tire settings option in the vehicle settings; within the tire settings, click on tire monitoring to view the tire pressure. Generally, a tire pressure exceeding 2.8bar is considered too high, and a tire pressure below 2.0bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; causes excessive stretching of tire cords, reducing tire elasticity and increasing the load on the car during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, affecting driving safety; increases movement in various parts of the tire, causing abnormal heating due to excessive rolling; reduces the functionality of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, causing damage to the bead area and abnormal wear; multiplies friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol, an irregular circle without a seal on top, with four small spikes below and an exclamation mark inside), there are generally three reasons: Abnormal tire pressure: Usually alerts when below 1.8bar or above 3.0bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, the tire pressure was not reset in time, causing the system to still record the previous data, thus lighting the indicator. Simply perform a tire pressure reset. Damaged tire pressure sensor: The tire pressure sensor, used to monitor tire pressure, is directly installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, it will also trigger the tire pressure warning light. For sensor damage issues, only replacement with a new part is possible.

19

2

Share

What is Automotive Compression Restoration Technology?

Automotive compression restoration technology is based on the principle of data restoration and metal sheet repair without putty. The core process involves flattening the metal sheet without thinning it, enabling seamless restoration to a degree where no traces of repair are visible. Features of the Repair Technology: This repair technique does not require painting or extensive metal work, and it is cost-effective with excellent restoration results. It allows for quick repair of dents using tin soldering. Applicable for Exterior Repairs: It can be used to restore deformed parts of the automotive metal exterior, such as dents on the car body. The metal sheet is restored to its original shape, followed by the application of specialized paint to ensure the repaired metal surface matches the undamaged areas.

9

0

Share

Do new cars purchased now require a break-in period?

Modern cars do not require deliberate break-in, but it is important to avoid placing excessive load on the vehicle during initial use. Reasons for the break-in period: In the past, due to backward automotive production technology, imprecise and rough dimensions of car parts, transmissions and engines could not operate perfectly after installation and debugging. This led to the concept of a break-in period. Definition of the break-in period: The break-in period generally refers to the process where mechanical components initially come into contact, friction, and meshing during operation. In modern usage, it often describes the period when two entities or organizations adapt and become familiar with each other's internal operations.

3

4

Share

What is the impact of receiving 6 penalty points during the additional driving license application period?

The impact of receiving 6 penalty points during the additional driving license application period: The additional driving license will enter a probationary period, and if 6 points are accumulated during this probationary period, it will be extended by one year. If you receive penalty points, you should promptly address the traffic violation, pay the fine, and the points will only be cleared at the end of the scoring cycle. In the case of obtaining a B2 driver's license: If you have already obtained a B2 driver's license, according to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," if you receive more than 6 penalty points but less than 12 during the probationary period, the probationary period will be extended by one year. If you receive another 6 penalty points (but less than 12) during the extended probationary period, your driving qualification for the probationary vehicle type will be revoked. In other words, the additional B2 driver's license will be invalidated. C1 penalty points not cleared after upgrading to B2: If you receive penalty points on your C1 license, you must promptly address the traffic violation and pay the fine. If the violation is not resolved, the points will not be cleared even after upgrading your license. If a motor vehicle driver accumulates less than 12 penalty points within a scoring cycle and has paid all fines, the points will be cleared. However, if there are unpaid fines, the points will carry over to the next scoring cycle.

3

Share

What is the fuel consumption per 100 kilometers for the Honda City?

The Honda City has a total of 5 models. Among them, the 2019 1.5L CVT Xingdong Pro version, CVT Comfort version, and CVT Xingdong version, all equipped with a 131 horsepower engine, have an NEDC fuel consumption of 5.4L per 100 kilometers. The 2019 1.5L manual Comfort version and manual Progressive version, also equipped with a 131 horsepower engine, have an NEDC fuel consumption of 5.6L per 100 kilometers. The fuel tank capacity is the same across different Honda City models. The distance that can be covered with a full tank of fuel is as follows: For models equipped with a 131 horsepower engine and an NEDC fuel consumption of 5.4L per 100 kilometers, the fuel tank capacity is 40L, allowing a distance of 40/5.4*100=741km. For models equipped with a 131 horsepower engine and an NEDC fuel consumption of 5.6L per 100 kilometers, the fuel tank capacity is 40L, allowing a distance of 40/5.6*100=714km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption include: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle when approaching traffic lights, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power output, requiring more gasoline for combustion. Heavier cars also consume more fuel due to the greater driving torque needed. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline is harder to atomize, requiring more gasoline for combustion, thus increasing fuel consumption. Additionally, at lower temperatures, the engine's computer may control the engine to run at higher RPMs to warm up, which also increases fuel consumption.

8

1

Share

When was the inspire launched?

What Issues Should Be Paid Attention to When Buying a Car?

What is the appropriate tire pressure for an Audi Q5?

What is Automotive Compression Restoration Technology?

Do new cars purchased now require a break-in period?

What is the impact of receiving 6 penalty points during the additional driving license application period?

What is the fuel consumption per 100 kilometers for the Honda City?

Do modern electronic parking brakes release automatically?

How to Turn Off the Wrench Light on the 10th Generation Accord Dashboard?

What is the 0-100 km/h acceleration time of the Q5L?

What are the differences between the Corolla Elite and Luxury trims?