···
Log in / Register

When was the Haval F7X launched?

2 Answers
NolanMarie
07/29/25 5:50am

Haval F7X was launched in 2019. The details about Haval F7X are as follows: 1. Body dimensions: The length, width, and height are 4620mm/1846mm/1660mm respectively, with a wheelbase of 2725mm. Depending on the configuration, the new car will offer headlight groups with different light sources and various styles and sizes of rims. 2. Exterior: The headlights are connected to the wide and flat hexagonal 'big mouth' grille; the outer side of the taillights has a chamfer, with a central chrome decoration that runs through and integrates with the taillights, and there are two fake exhausts below. 3. Power: Equipped with GW4B15A 1.5T engine and GW4C20B 2.0T engine. Among them, the 1.5T engine has a maximum power of 169 horsepower and a peak torque of 285 N·m, while the 2.0T engine has a maximum power of 197 horsepower and a peak torque of 345 N·m.

Was this review help?
3
0
Share
LeRebecca
08/12/25 8:24pm

I drive a Haval F7X bought in 2019, clearly remember it launched in April. I followed discussions on auto forums for half a year back then - its Shanghai Auto Show debut was huge, test drives only became available at dealerships in May. That fastback design was truly eye-catching among domestic cars at the time, with the 2.0T engine delivering solid acceleration, and the infotainment system even supported TikTok installation. First batch owners didn't get their cars until July/August - some complained about system lag in group chats until OTA updates fixed it. Now the 2019 models have depreciated heavily in used car market, suggest considering post-2020 facelifted versions if buying secondhand.

Was this review help?
15
1
Share
Expand All
More Forum Discussions

Where is the warm air switch of Hongqi H5?

The warm air switch of Hongqi H5 is located on the air conditioning fan or AC switch. Introduction to Hongqi H5: The Hongqi H5 is a new model under the Hongqi brand. The H5 largely retains the design of the Hongqi B-Concept concept car, featuring an inverted trapezoidal front grille connected to the headlights with vertical chrome trim strips inside. It is equipped with a 1.8T engine, rated power of 131kw, torque of 250Nm, and matched with a 6AT transmission. Precautions for using warm air: In winter, many car owners turn on the heating as soon as they start the car because they are afraid of the cold. In fact, since the engine has just started in winter and the water tank temperature is still low, turning on the air conditioning not only fails to quickly increase the temperature inside the car but also adds burden to the engine, delaying the normal rise in engine temperature. The correct approach is to start the engine for preheating first. Wait until the engine temperature pointer reaches the middle position, then turn on the warm air conditioning and set the air circulation to external circulation to expel the cold air inside the car. After 2 to 3 minutes, set the air circulation to internal circulation.
13
1
Share

How Many More Years Can National V Emission Standard Vehicles Be Driven?

National V vehicles can likely be used for about 4 more years. Here are some details about National V vehicles: 1. National V vehicles refer to emission standards set by the government at different stages; the main purpose is to control and reduce vehicle pollutant emissions, with later standards being more energy-efficient and environmentally friendly. 2. Compared to the Phase IV standards, the implementation of National V standards will significantly reduce vehicle pollutant emissions. New vehicles will see a 25% reduction in nitrogen oxide emissions and an 80% reduction in particulate matter emissions, while in-use vehicles will experience an overall reduction of 10% to 15% in emissions, which is of great significance for improving air quality.
11
0
Share

Why Does the Transmission Have Shift Shock?

Transmission shift shock is a particularly challenging and complex type of fault in automatic transmissions, involving a wide range of issues and numerous potential failure points, making troubleshooting difficult. The following factors can influence shift shock faults: 1. Mechanical faults: such as improper assembly clearance of automatic transmission friction plates, improperly installed snap rings, etc. 2. Hydraulic circuit faults: such as improper adjustment of the throttle cable, misaligned steel balls in the valve body, incorrect accumulator oil pressure adjustment, blocked shift valve or sequence valve circuits, unsynchronized brakes and clutches, excessive wear of throttle orifices, etc. 3. Electrical circuit faults: such as faults in the throttle position sensor, flow sensor, vehicle speed sensor, or shift solenoid valves.
16
5
Share

What Are the Precautions for Safe Driving in Summer?

To ensure safe driving in summer, in addition to complying with traffic regulations, the following precautions should be taken: 1. Avoid fatigue driving: Ensure sufficient sleep to stay alert. If you feel drowsy while driving, pull over promptly and take a short rest. 2. Choose and use sunglasses correctly: Do not select sunglasses that are too dark. Opt for polarized sunglasses as they can filter out harmful light. 3. Do not drive in slippers: Hot summer weather can cause sweaty feet, increasing the risk of accidents in emergencies. 4. Prevent tire blowouts in high temperatures: Summer temperatures can cause road surfaces to exceed 60 degrees Celsius. Prolonged driving raises tire temperature, potentially leading to overheating and increased tire pressure, which heightens the risk of blowouts.
7
5
Share

What Causes the Noise in the B-Pillar Seat Belt Stopper?

Here are the reasons related to the noise in the B-pillar seat belt stopper: 1. Lack of Lubrication: Use lubricants such as grease for lubrication and rust prevention, or you can also use lubricating oil. 2. Improper Installation: Wear and tear due to improper installation during use or caused by door sagging. 3. Damaged Stopper: Long-term violent opening or closing of the door, causing the door stopper to deform or bend under force. Solution: Loosen all the installation screws of the stopper, open and close the door repeatedly more than 5 times, and then tighten the screws. Generally, the noise can be resolved.
19
5
Share

What is the difference between Golf R and GTI?

The differences between Golf R and GTI are: 1. Different body dimensions: The Golf R has a length, width, and height of 4263mm, 1799mm, and 1460mm respectively, with a wheelbase of 2360mm; the GTI has a length, width, and height of 4269mm, 1799mm, and 1469mm respectively, with a wheelbase of 2431mm. 2. Different power: The Golf R has a maximum horsepower of 290ps; the GTI has a maximum horsepower of 220ps. Both the Golf R and GTI are equipped with a 2.0L inline 4-cylinder turbocharged engine, paired with a 7-speed dual-clutch transmission.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.