When was the 8.5th generation Accord launched?

1 Answers
Stanley
07/29/25 11:12pm
The 8.5th generation Accord was launched in 2013. Here are some relevant details about it: 1. The increase in dimensions and space was a key highlight of the 8th generation Accord. Its length, width, and height reached 4945mm, 1845mm, and 1480mm respectively, with a wheelbase of 2800mm. In terms of size classification, the 8th generation Accord transitioned from the 'mid-size' category as defined by the U.S. Environmental Protection Agency (EPA) to the 'large' category, surpassing its predecessors in both dimensions and space. The generous size meets customers' demands for spacious comfort. 2. The all-new interior design fully embodies a premium and stylish aesthetic. The dashboard is innovatively divided into an upper information zone and a lower control zone, with ergonomic enhancements. The 8th generation Accord's interior significantly reduces the use of environmentally harmful PVC materials and volatile organic compounds (VOCs) that are detrimental to human health, fully demonstrating Honda's commitment to environmental protection and human well-being.
Was this review help?
12
4
Share
More Forum Discussions

What symbol is used to represent China VI?

China VI is represented by the symbol VI. The emission standard for China VI vehicles specifies a sulfur content not exceeding 50mg per kilogram and PM fine particulate matter not exceeding 3mg per kilometer. China VI refers to the standard established to implement the Environmental Protection Law of the People's Republic of China and the Air Pollution Prevention and Control Law of the People's Republic of China, aiming to prevent and control environmental pollution caused by exhaust emissions from compression-ignition and gas-fueled ignition engine vehicles, protect the ecological environment, and safeguard human health. Methods to check whether a vehicle meets China VI standards include: 1. Logging in to the Motor Vehicle Environmental Protection website for inquiry; 2. Inquiring at the vehicle management office; 3. Checking the vehicle's environmental protection label; 4. Reviewing the vehicle's factory certificate.
18
2
Share

What grade of gasoline does the T-Roc use?

The T-Roc uses 95-octane gasoline. Gasoline is a volatile, flammable hydrocarbon mixture liquid obtained from petroleum through distillation or cracking processes, and it is used as fuel. It appears as a transparent liquid, primarily composed of aliphatic hydrocarbons, naphthenic hydrocarbons, and a certain amount of aromatic hydrocarbons. The characteristics of gasoline include: 1. Volatility; 2. Stability; 3. Anti-knock properties; 4. Corrosiveness; 5. Cleanliness. Taking the 2021 T-Roc as an example, it belongs to the compact SUV category with the following dimensions: length 4318mm, width 1819mm, height 1582mm, wheelbase 2680mm, front track 1542mm, rear track 1543mm, fuel tank capacity 51 liters, and trunk capacity 401 liters.
8
4
Share

Which gear should a motorcycle use when waiting at a red light?

When a motorcycle stops to wait at a red light, it should be shifted into neutral gear, and then shifted into first gear to start when the light turns green. If the waiting time at the red light is very short, it can also be left in first gear, and when the light turns green, simply release the clutch and apply the throttle to start. It is not advisable to use a high gear when starting. There is a special situation here that some riders might adopt: downshifting to second gear while holding the clutch and continuing to coast. This operation can cause some damage to the vehicle, but as long as you don't rev the throttle recklessly, this damage can be ignored. In unavoidable situations where you have to stop in gear, you can completely choose first or second gear, close the throttle, or turn off the engine to stop.
11
1
Share

What is the method for removing the headlights of the Baojun 730?

The method for removing the headlights of the Baojun 730 is as follows: 1. Open the engine hood, unscrew the screws securing the windshield washer fluid filler tube, and twist the filler tube aside; 2. Rotate counterclockwise to remove the original dust cover; 3. Unscrew the fixing screws on the headlight assembly to remove the headlights. Taking the 2021 Baojun 730 as an example, it belongs to the MPV category, with body dimensions of: length 4780mm, width 1780mm, height 1740mm, wheelbase 2750mm, and fuel tank capacity of 52 liters. The 2021 Baojun 730 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 147PS, maximum power of 108kW, maximum torque of 250Nm, and is paired with a 6-speed manual transmission.
9
2
Share

Can the Auto Start-Stop System Be Permanently Disabled?

Auto start-stop system cannot be permanently disabled. The auto start-stop system is a set of systems where the engine will pause when the vehicle is in a stopped state, and the engine will restart when the brake pedal is released. The correct way to use the auto start-stop system is: 1. Press the ON button next to the start button to activate the start-stop function; 2. Shift to D gear, step on the brake to stop, and the engine will automatically shut off; 3. Release the brake and the engine will automatically start. The correct parking procedure for the auto start-stop system is: 1. For automatic transmission vehicles, step on the brake, and the engine will automatically shut off after about two seconds; 2. For manual transmission vehicles, when parking, shift to neutral, then pull the handbrake and release the clutch. After the system recognizes these three actions, it will automatically shut off the engine.
13
2
Share

Differences Between DC Ignition and AC Ignition for Motorcycles

Differences between DC ignition and AC ignition: 1. Power supply method: AC ignition is powered by the stator coil of the magneto, while DC ignition is powered by the battery or rectifier. By checking whether the power supply line to the ignition comes from the magneto or the battery, you can determine whether it is an AC or DC ignition. 2. Shutdown method: AC ignition shuts down by short-circuiting the ignition signal line to ground. The ignition has a shutdown wire connected to the shutdown switch; closing the shutdown switch grounds the circuit to shut it down. In contrast, DC ignition shuts down by cutting off the DC power supply, achieved by turning off the shutdown switch. 3. Input voltage: DC ignition performs better in cold starts, while both types perform similarly in hot starts. 4. Ignition voltage: DC ignition provides stronger ignition energy and faster performance acceleration compared to AC ignition. 5. Fuel efficiency: DC ignition has higher ignition energy and significantly better acceleration performance than AC ignition, making it more fuel-efficient.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.