When was the 2019 Jeep Cherokee released?

1 Answers
SanJudah
07/30/25 2:23am
According to reports, the 2019 Jeep Cherokee has already undergone domestic testing in China. The mid-cycle facelift model will feature a design similar to the overseas version, with minor adjustments to the front end, including a split-type front grille. In addition to retaining the 2.0L+9AT powertrain, the new model will replace the original 2.4L naturally aspirated engine with a 2.0T engine. Below are the details about the 2019 Jeep Cherokee: 1. Exterior: The new model features a redesigned exterior, with blackened headlights that include LED light sources and daytime running light strips, giving it a refined look. 2. Powertrain: The new Jeep Cherokee will be equipped with a 2.0L engine and two versions of the 2.0T engine with different power outputs. The low-power 2.0T version delivers a maximum power of 172 kW and a peak torque of 350 Nm, while the high-power version offers a maximum power of 195 kW and a peak torque of 400 Nm. The transmission system includes a 9-speed automatic gearbox, supports low-speed torque amplification, and is equipped with a mechanical electronically controlled rear differential lock.
Was this review help?
10
0
Share
More Forum Discussions

Where is the wiper relay located in the new Sylphy?

The wiper relay of the new Sylphy is located in the fuse box on the left side of the engine compartment. The wiper switch is on the right side of the steering wheel, which includes controls for the wiper mode and wiping frequency. Moving the lever up and down adjusts the wiper arm frequency, while rotating the knob changes the mode. Wiper operation principle: The wiper motor adopts a 3-speed structure for easy speed adjustment. The intermittent timing is controlled by the intermittent relay, utilizing the motor's return switch contacts and the relay's resistor-capacitor charge-discharge function to make the wiper sweep at a fixed cycle. Wiper blade rubber: The wiper blade rubber is the tool that directly removes rainwater and dirt from the windshield.
15
4
Share

Where is the Nissan Sylphy's supplemental airbag module located?

Safety airbag modules are generally located in front of the gear shift lever or beneath it. To access the airbag module, recline the seat, turn the key to the on position, remove the screws from the steering wheel, and take off the steering wheel. Locations of airbag anti-collision devices: The driver-side airbag anti-collision device is located in the steering wheel; the passenger-side airbag anti-collision device is typically installed on the dashboard. Locations of airbag sensors: Airbag sensors are installed on the left, right, and central sections of the cabin partition; the central airbag sensor and the airbag system are integrated with the electronic control unit.
5
5
Share

Where is the Nissan Qashqai produced?

Dongfeng Nissan Passenger Vehicle Company has four factories located in Huadu, Xiangyang, Zhengzhou, and Dalian, so the vehicle is produced in all these four locations. Introduction to Dongfeng Nissan's factories: Dongfeng Nissan has now established a strategic layout across the north and south with four major bases in Huadu, Xiangyang, Zhengzhou, and Dalian, each with its own focus. The headquarters factory in Huadu, as the mother plant, focuses on the production of entry-level and mid-level sedans, aiming to build a large-scale production facility. The Xiangyang plant, as a benchmark for quality, primarily produces high-end models and planned to start production of Infiniti brand models in 2014. The Zhengzhou plant leads the production of NISSAN brand SUV models and Venucia brand models. The Dalian plant planned to start production of NISSAN brand models in 2014.
4
1
Share

What is the maximum wading depth of the Leopard Black Diamond?

The height from the ground to the exhaust pipe of the car is 47 centimeters. Subtracting the water surge during driving, the maximum wading depth is 40 centimeters. Additional information is as follows: 1. Car transmission: It is divided into manual and automatic. The manual transmission mainly consists of gears and shafts, achieving speed and torque changes through different gear combinations. 2. The automatic transmission (AT) is composed of a hydraulic torque converter, planetary gears, and a hydraulic control system, achieving speed and torque changes through hydraulic transmission and gear combinations. 3. Engine: It is a machine that can convert other forms of energy into another form of energy, usually converting chemical energy into mechanical energy. 4. Chassis: It refers to the combination of the transmission system, running system, steering system, and braking system in a car.
8
4
Share

What type of gasoline should be used for the Nissan Qashqai?

Nissan Qashqai has a fuel tank capacity of 57 liters, and the manufacturer recommends using 92-octane gasoline. For safety reasons, the engine must be turned off before refueling, and the fuel tank cap can be opened by pulling the fuel tank cap switch. Nissan Qashqai refueling process: Pull the fuel tank cap switch located in the control area on the left side of the steering wheel. Unscrew the fuel tank cap. After removing the fuel tank cap, place it on the fuel tank cover. Then, insert the fuel nozzle into the fuel tank. Begin refueling. When the fuel nozzle is automatically cut off for the first time, the fuel tank is full. Continuing to refuel will fill the expansion chamber of the fuel tank. Do not remove the fuel nozzle immediately; leave it in the fuel filler neck for 5 seconds to allow any remaining fuel to drain into the tank. Fuel tank cap switch method for other Nissan series: The fuel tank cap opening button is located below the left side of the driver's seat. Pull the switch to open the fuel tank cap. The fuel tank cap can then be opened for refueling.
9
0
Share

What does it mean to postpone the renewal of a driver's license on 12123?

12123 postponement of driver's license renewal refers to exceeding the stipulated time to replace the motor vehicle driver's license. The following are the matters that need attention after obtaining a new driver's license: 1. Probation period: From the day the driver's license is obtained, it is the probation period within one year. Many matters need attention during the probation period. The driver's license during the probation period cannot be used on highways unless accompanied by a veteran driver with 3 years of experience; if a C1 driver's license is deducted 12 points during the probation period, the probationary driving qualification will be immediately revoked. For large vehicle licenses above B class, if 6-12 points are deducted during the probation period (less than 12 points), the probation period will be extended for another year, and the holder must retake the subject 1 test within 30 days after the probation period. 2. Driver's license renewal: After the one-year probation period, it is necessary to go to the local vehicle management office where the license was issued to renew the driver's license, but any violations must be handled first. After 6 years of holding the driver's license, it is necessary to go to the local vehicle management office where the license was issued to renew it. A medical examination at the hospital is required, along with the driver's license, ID card, and three 1-inch color photos to fill out the application form at the vehicle management office. 3. Points cycle: The points cycle of a driver's license is one year from the day the license is obtained. If a C1 driver's license is not deducted 12 points within this year and all violations are handled and fines paid before the second cycle, the points will be replenished to 12 at the beginning of the second cycle.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.