When to Use Sport Mode?

What type of suspension does the Magotan have?

The Magotan features a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear. Below is a detailed introduction to the Magotan's front and rear suspensions: 1. The MacPherson strut independent suspension is one of the most widely used car suspensions in the world today. This type of suspension primarily consists of a coil spring, shock absorber, and lower control arm, making its structure relatively simple. The MacPherson strut independent suspension is relatively lightweight, allowing the car to better adapt to the road during cornering, thereby improving driving comfort for passengers. 2. The multi-link independent suspension is another common type of suspension. Many mid-sized cars produced by Volkswagen use this suspension, which provides refined road handling and enhances ride comfort. Generally, multi-link independent suspensions are only used in mid-to-high-end cars because these vehicles offer better space performance, and the manufacturing cost of this suspension is relatively high. As a result, small and medium-sized cars on the market typically do not use this type of suspension.

14

0

Share

How Long Can an Engine Last After Cylinder Boring?

Generally, a car engine can last about 3,000 kilometers after cylinder boring. Depending on the assembly condition, it may even last several hundred thousand kilometers. Cylinder boring is a process performed when the engine has been running for a long time, causing severe cylinder wear, which inevitably leads to "oil leakage." This results in symptoms like burning oil, reduced power, and increased fuel consumption, necessitating cylinder boring. Below are some key points about cylinder boring: 1. After cylinder boring, the engine requires a break-in period similar to a new car, covering 2,000 to 3,000 kilometers. The longevity depends on the extent of major repairs and part replacements. If the four key components (piston, piston rings, cylinder liner, and connecting rod bearings) are replaced, the crankshaft and bearings are in good condition, and the valve seals are renewed, the engine can run another 100,000 or even 200,000 kilometers without issues. 2. Cylinder boring is a common repair method for excessively worn dry cylinder liners. Since a thin layer of the cylinder wall is "polished" off, the cylinder diameter inevitably becomes slightly larger.

4

1

Share

How to Adjust the Handbrake on a Cruze?

Handbrake is located at the rear wheels and can only be seen when the car is lifted onto a rack. There is one cable from each of the rear wheels, which then merges into one. At the junction point, there is a screw for adjustment. The Cruze handbrake is self-adjusting, with an automatic adjuster installed inside the wheel hub. Each time the handbrake is pulled, it completes one cycle of adjustment automatically, so generally, no manual adjustment is needed. More details are as follows: 1. The professional term for the handbrake is auxiliary brake, which operates differently from the main brake. It uses a steel cable connected to the rear brake shoes to apply braking force to the vehicle. 2. Long-term use of the handbrake can cause plastic deformation of the steel cable. Since this deformation is irreversible, prolonged use will reduce its effectiveness and increase the handbrake's travel distance. 3. A return spring is used in conjunction with the handbrake. When the handbrake is engaged, the spring is stretched; when released, the spring returns to its original length. Long-term use of the handbrake can also cause corresponding deformation of the spring.

12

4

Share

How to reset the maintenance light on a Ford Mondeo?

To reset the maintenance light on a Ford Mondeo, first turn on the vehicle's ignition switch, press and hold the reset button, then turn off the ignition switch until the mileage on the screen completely disappears. Release the button, press and hold the reset button again, restart the vehicle, and wait until the maintenance information appears on the dashboard. Then release the reset button and restart the vehicle. More details are as follows: 1. Maintenance intervals for the Ford Mondeo: The manufacturer recommends maintenance every 10,000 kilometers or six months, but most 4S dealerships suggest maintenance every 5,000 kilometers or six months when using semi-synthetic or mineral oil. This interval is acceptable, but if using full synthetic oil, maintenance can be extended to 10,000 kilometers or one year. 2. Engine maintenance requires 4.5 liters of oil. When changing the oil, you can first purchase one 4-liter bottle and one 1-liter bottle. After maintenance, seal the remaining 0.5 liters from the 1-liter bottle properly and store it. For the next maintenance, simply purchase another 4-liter bottle.

15

2

Share

How to Identify the Quality of Car Window Tinting?

Identifying the quality of car window tinting: 1. Light transmission and clarity, which are the most important performance factors related to driving safety in car films. Some sun films (commonly known as tea-colored films) may have a very dark color but extremely low light transmission, making the view appear pitch black after application. This necessitates cutting a hole in the side window film to see the rearview mirror, which is quite dangerous for driving. 2. Heat insulation performance. The heat insulation rate is a crucial indicator of a car film's heat insulation capability. Currently, films like Amber Optical, Llumar, AC Delco, and Ray-Ban on the market generally have a heat insulation rate of over 50%, offering high light transmission and excellent heat insulation. This not only enhances driving comfort but also reduces air conditioning load, achieving fuel efficiency. In contrast, many other films only offer light transmission without heat insulation, and some even lack any measurable indicators. Therefore, when choosing a film, consumers should not only check if the heat insulation rate and other indicators meet standards but also use the most reliable method: blocking the sun with the tinted glass or testing the heat insulation effect directly with their face or hands under an iodine-tungsten lamp.

6

2

Share

Where is the Haima M6 Air Conditioning Filter Located?

The air conditioning filter of the Haima M6 is located inside the glove compartment on the passenger side. You need to remove the glove compartment to access it. More details about the Haima M6 are as follows: 1. As a mid-size car under the Haima brand, the Haima M6 has an overall length of 4700mm, a width of 1802mm, and a height of 1478mm, giving it a sporty appearance. The front grille features horizontal chrome trim with the brand logo embedded in the middle, presenting a bold and elegant look. The headlights on both sides resemble blades and use halogen bulbs. 2. The Haima M6 is equipped with a total of 6 airbags, including those for the driver, front passenger, side, and side curtain airbags, which is a rare safety feature in its class. Additionally, it comes with an ESP electronic stability control system and a reverse radar, highlighting the model's emphasis on safety. 3. In terms of power, it utilizes a self-developed platform by Haima, including a 1.6L NG116 engine with a maximum horsepower of approximately 118. The transmission is paired with a 5-speed manual gearbox. This model is also Haima's first to apply T-power technology.

20

1

Share

When to Use Sport Mode?

What type of suspension does the Magotan have?

How Long Can an Engine Last After Cylinder Boring?

How to Adjust the Handbrake on a Cruze?

How to reset the maintenance light on a Ford Mondeo?

How to Identify the Quality of Car Window Tinting?

Where is the Haima M6 Air Conditioning Filter Located?

What is the real fuel consumption of the Great Wall Tank 300?

Where is the tire pressure display for the Changan Uni-T?

Why is the Buick Verano's air conditioning not cooling?

What is the correct usage of the one-touch window lift function in the Lavida?