When to Turn on the Width Lights?

2 Answers
LeCamille
07/25/25 10:55am
Width lights are used when it is not completely dark yet, and are turned on during evening driving to make the vehicle visible to others. Width lights are indicators installed on a vehicle to show its width. They are commonly used lights. When the width lights are on, the distance between the two beams is roughly the same as the width of the vehicle. If you are unsure whether your vehicle can pass through a narrow alley, you can turn on the width lights. Below is an introduction to other commonly used vehicle lights: 1. Headlights. These are installed on both sides of the front of the vehicle and are used for road illumination during nighttime driving. They come in two-lamp and four-lamp configurations. The illumination effect of headlights directly affects nighttime driving operations and traffic safety. 2. Turn signals. These are important indicators turned on when a vehicle is changing direction to alert surrounding vehicles and pedestrians. Turn signal lamps use xenon tubes and are controlled by a microcontroller circuit, working in an alternating left-right flash pattern without interruption.
Was this review help?
11
2
Share
PenelopeLynn
08/11/25 7:51pm
As an experienced driver who has been behind the wheel for many years, I believe that parking lights are most appropriate to turn on in low-light conditions, such as at dusk or dawn when visibility is poor. The lights help other drivers see the outline of the car to avoid collisions. Additionally, in heavy fog or rainstorms where visibility drops sharply, it's essential to turn on the parking lights for safety. Don’t forget to use them on winding mountain roads either, to prevent rear-end collisions. Once, I accidentally left the parking lights on during the day, which nearly drained the battery and almost left me stranded. Since then, I’ve made it a habit to check the lighting conditions first—if it’s dim, I manually turn them on or set them to auto mode. Following these small practices enhances the overall driving experience, avoids fines, and is more environmentally friendly.
Was this review help?
7
2
Share
Expand All
More Forum Discussions

Is there a big difference between the 4WD and 2WD versions of the Tayron?

The Tayron model offers both 4WD and 2WD versions, and there are significant differences between the two. The main differences are as follows: 1. In terms of driving form, the 4WD Tayron has better off-road capability on unpaved roads compared to the 2WD version, and the 4WD also performs much better on winter roads in northern regions. 2. The main advantages of the 2WD version lie in price and fuel economy, as the 2WD Tayron is more fuel-efficient than the 4WD version. Therefore, the choice between 4WD and 2WD depends on individual needs. Here is more information about the Tayron: 1. The Tayron was launched on October 22, 2018, by FAW-Volkswagen, offering four powertrain options: 280TSI, 330TSI, 380TSI, and both 2WD and 4WD variants, totaling 10 models. 2. As a midsize SUV, the Tayron has a length of 4595mm, a width of 1860mm, a height of 1660mm, and a wheelbase of 2731mm.
15
0
Share

What are the chassis codes for the Mercedes-Benz S-Class?

The Mercedes-Benz S-Class sedan is the epitome of prestige, inheriting over a century of Mercedes-Benz's exquisite automotive craftsmanship while driving continuous technological innovation. In terms of safety, automotive engineering, and environmental protection, the latest S-Class sedan is equipped with more than thirty advanced enhanced features, making it an absolutely trustworthy and superior vehicle. The letters preceding the Mercedes-Benz model names indicate the type and class: A-Class for compact single-compartment vehicles, C-Class for compact sedans, E-Class for mid-size sedans, S-Class for luxury sedans, M-Class for SUVs, G-Class for off-road vehicles, V-Class for multi-purpose vans, SLK for compact sports cars, CLK for mid-size sports cars, SL for luxury sports cars, CL for luxury coupes, and SLR for supercars. The numbers in the middle of the model names, such as 280, 300, and 500, represent the engine displacement, indicating 2.8L, 3L, and 5L respectively. The letter L at the end of the model name denotes a long-wheelbase version, while Diesel indicates a diesel engine. For example, S600L signifies a luxury, 6L displacement, long-wheelbase sedan.
12
1
Share

Should I Use High and Low Beams When Overtaking on the Highway at Night?

When overtaking, you should switch from high beams to low beams in advance and turn on the turn signal to inform the vehicle ahead of your position and intention. When the distance to the vehicle ahead is less than 80-100 meters, you should switch back to low beams. Otherwise, the strong glare from your high beams may affect the driver's view through the side and rearview mirrors, compromising their ability to observe the situation behind and indirectly reducing the safety of the overtaking maneuver. Additionally, you can use the high beams of the vehicle ahead to observe the road further ahead. In foggy conditions with visibility less than 200 meters, turn on the fog lights, low beams, marker lights, and front and rear position lights. If visibility drops below 100 meters, activate the fog lights, low beams, marker lights, front and rear position lights, and hazard warning flashers. When visibility is less than 50 meters, turn on the fog lights, low beams, marker lights, front and rear position lights, and hazard warning flashers. Additionally, reduce your speed to no more than 20 kilometers per hour and exit the highway at the nearest available exit as soon as possible. During normal driving at night, use the nighttime running lights and width indicator lights. If there are no vehicles ahead, you may briefly switch to high beams to observe the road and surroundings further ahead, then quickly switch back to low beams.
11
3
Share

What are the symptoms of a faulty car air conditioning temperature sensor?

Car air conditioning temperature sensor failure can cause the air conditioning compressor to malfunction, affecting the air conditioning regulation capability, leading to erratic operation of the air conditioning system. Below is relevant information about automotive air conditioning: 1. Introduction to Automotive Air Conditioning: Automotive air conditioning consists of a compressor, condenser, throttle element, evaporator, fan, and necessary control components, forming an air conditioning system that regulates the temperature and humidity inside the vehicle to provide a comfortable environment for the driver. 2. Working Principle: When the compressor operates, it draws in low-temperature, low-pressure gaseous refrigerant from the evaporator. After compression, the temperature and pressure of the refrigerant increase, and it is sent to the condenser. Inside the condenser, the high-temperature, high-pressure gaseous refrigerant transfers heat to the outside air passing through the condenser, causing it to liquefy and turn into a liquid. The liquid refrigerant flows through the throttle device, where its temperature and pressure decrease, and it enters the evaporator. Inside the evaporator, the low-temperature, low-pressure liquid refrigerant absorbs heat from the inside air passing through the evaporator, causing it to evaporate and turn into a gas. The gas is then drawn into the compressor for the next cycle.
1
3
Share

How to reset the brake pads on a Mercedes-Benz GLC200?

1. Open the driver's side door. 2. Press the brake pedal to prepare for starting the engine. 3. Press the car's one-key start button to start the engine. 4. The car's dashboard lights up, and the entire vehicle's power is connected. 5. Press the brake pad reset button located next to the gear lever, and the operation is complete. 1. When the brake pads wear down to the warning position [the brake pads are equipped with a metal piece for warning purposes; when the brake pads wear thin, the metal piece produces abnormal noise, indicating the need for replacement. In most cases, simply replacing the new brake pads will reset it. Under normal usage conditions, the replacement cycle for brake pads is usually around fifty to sixty thousand kilometers. In the vast majority of cases, we use whether the brake warning light on the dashboard lights up as the basis for determining whether to replace the brake pads, but this is already the last line of defense. Although all vehicles basically have such a warning system, some directly sense the thickness of the brake pads, while others only light up the warning light when the brake pads are completely worn out and the brake fluid is extremely low. Therefore, during every maintenance visit, it is essential to check whether the brake pads are still usable and replace those nearing the end of their lifespan in advance, rather than solely relying on the warning light.
20
4
Share

How to set the automatic downward tilt of the rearview mirror when reversing in Haval M6?

Start the car, shift into reverse gear, adjust the downward tilt angle of the right rearview mirror, then press the SET button on the seat memory. A sound will indicate successful setup. When the vehicle is in reverse gear, the right rearview mirror will automatically adjust its angle downward to help the driver see the ground. The mirror automatically adjusts during reversing to improve visibility and resets when driving forward, which is a very user-friendly design. To set the memory, shift into reverse gear and hold the seat memory button on the driver's left side until you hear a sound, indicating successful memory. Only the right rearview mirror has this function. Press the right button on the rearview mirror, and it will automatically tilt down during reversing. For the left mirror adjustment, turn to R, and the right mirror will automatically tilt down. First shift into reverse gear, adjust the right mirror to the desired position, then exit reverse gear. The rearview mirror is a tool that allows the driver to directly obtain external information about the rear, sides, and below the car while seated in the driver's seat. For the convenience of the driver and to prevent traffic safety accidents and ensure personal safety, all countries require cars to be equipped with rearview mirrors, and all mirrors must be adjustable.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.