When to Remove the Red Ribbon Tied on the Car?

What kind of engine oil should be used for Audi Q5L maintenance?

Audi maintenance is generally performed once a year or every 10,000 kilometers. Automobile maintenance: Automobile maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the relevant parts of the automobile, also known as automobile servicing. Audi Q5L maintenance items: Replace engine oil and oil filter, visually inspect the engine for leaks or damage, visually inspect all components related to exhaust emissions, check the exhaust system for leaks or damage, check the concentration of coolant antifreeze, add coolant or adjust the concentration if necessary, query the self-diagnosis system fault memory, check the thickness of brake friction linings, visually inspect the brake system for leaks or damage, check the brake fluid level according to the wear status of the brake friction linings, visually inspect the transmission, final drive, and constant velocity joint protective covers for leaks or damage, check the steering ball joint dust covers for leaks or damage, check the tread depth and wear pattern of all tires, check tire pressure and adjust if necessary, check the battery electrolyte level and add distilled water if necessary, check the steering tie rod joint clearance, tightness, and dust cover condition, check the air storage tank and waterproof valve for cleanliness and clean if necessary, check the function of door locks, safety locks, and child safety locks, check the function of lighting, turn signals, hazard warning lights, warning/indicator lights, and horn, check the function of windshield wipers/washers, headlight washers, washer nozzles, and the stopping position of the wipers.

19

1

Share

What does it mean when the ST light on a car is on?

When the ST light on a car is illuminated, it indicates a brake light filament failure warning, also known as the brake light filament breakage indicator. The dashboard displays an image composed of an S and a T. When this light comes on, it is essential to promptly check whether the brake light filament has broken and address the issue accordingly. If the brake light filament is intact, the problem may lie with a faulty relay, and it is advisable to contact a service station for inspection. Typically, cars have two brake lights, but some models feature three. In vehicles with three brake lights, the third one is located on the rear windshield and serves as a high-mounted brake light. When the brake pedal is pressed, the brake lights illuminate, alerting drivers behind to maintain a safe distance and helping to prevent rear-end collisions. If the brake lights fail to light up, the driver behind may not realize the vehicle ahead is braking, significantly increasing the risk of a rear-end collision.

8

5

Share

What Causes the Air Conditioning to Stop Cooling After Washing the Car?

Reasons why the air conditioning stops cooling after washing the car: 1. Issues with the refrigerant in the car's air conditioning system: If a car with a dual-zone air conditioning system lacks sufficient cooling, it may result in hot air blowing from the vents. 2. The car's air conditioning compressor belt is too loose; the condenser is dirty; long-term lack of maintenance. Below is an introduction to air conditioning maintenance: 1. Comprehensive inspection of the air conditioning: When using the air conditioning for the first time in summer, inspect the air conditioning system, such as checking the refrigerant through the reservoir, whether the air filter is too dirty, and if there are any foreign objects in the radiator. 2. Pay attention to the cleaning of the air conditioning: The air filter should be replaced regularly, otherwise the air conditioning may produce a musty smell. Additionally, the condenser should be cleaned periodically, and the radiator should be removed for thorough cleaning.

10

2

Share

What are the differences between the Mercedes-Benz G350 and G63?

The following are the key differences between the G350 and G63: 1. Exterior: The G350 is a standard G-Class model featuring a horizontal slat grille design, while the G63 is an AMG variant with numerous AMG badges and a vertical slat grille. 2. Powertrain: The Mercedes-Benz G350 is equipped with a 2.0T engine delivering 258 horsepower and 370 Nm of peak torque, achieving 0-100 km/h acceleration in 8.1 seconds. The G63 boasts a 4.0T V8 engine paired with a 9-speed automatic transmission, producing 585 horsepower and 850 Nm of peak torque, with an official 0-100 km/h acceleration time of just 4.5 seconds.

1

0

Share

Can a Car's Odometer Be Adjusted?

Vehicle odometers can be adjusted by following these steps: 1. Locate the odometer sensor plug under the car's hood near the driveshaft and disconnect it; 2. Insert the output clip of the mileage adjuster into the signal socket of the sensor plug you just removed; 3. Properly insert the mileage adjuster into the cigarette lighter; 4. Turn the car key to activate all dashboard instruments, then use the small adjustment button on the mileage adjuster to set the desired vehicle speed; 5. Upon starting the vehicle, the numbers will automatically increase, allowing you to adjust the odometer reading.

20

4

Share

What are the differences between 5-seater and 7-seater vehicle annual inspections?

Differences between 5-seater and 7-seater vehicle annual inspections: 5-seater vehicles enjoy a 6-year exemption policy for initial inspections, while 7-seater vehicles still require annual inspections during the first 6 years. Within the first six years, 7-seater vehicles need to undergo on-site testing every 2 years, whereas 5-seater vehicles only require one on-site test during this period and are exempt for the remaining 5 years. Therefore, 7-seater vehicles will undergo 2 more inspections than 5-seater vehicles. Annual inspection procedure: First, after submitting the inspection application, the vehicle undergoes on-site testing. The vehicle is driven into the automatic detection area to sequentially check whether the exhaust emissions, speed, lights, side slip, and chassis meet the standards. All items must pass to proceed. Next is the appearance inspection, verifying the accuracy of the vehicle's license plate, type, body color, engine number, VIN code, and frame number. Then, the body appearance is inspected, including details such as the bumper, engine compartment, rearview mirrors, lower mirrors, window glass, paint, engine operation condition, and the interior of passenger vehicles and wheels. Finally, the owner can obtain the inspection report and application form from the inspector. If all inspection items pass, the owner can proceed to pay the inspection fee and collect the vehicle license and compliance label. If any items fail, the owner must repair them and participate in a re-inspection until they pass before proceeding with the visa formalities.

7

5

Share

When to Remove the Red Ribbon Tied on the Car?

What kind of engine oil should be used for Audi Q5L maintenance?

What does it mean when the ST light on a car is on?

What Causes the Air Conditioning to Stop Cooling After Washing the Car?

What are the differences between the Mercedes-Benz G350 and G63?

Can a Car's Odometer Be Adjusted?

What are the differences between 5-seater and 7-seater vehicle annual inspections?

What are the pros and cons of installing ETC?

What to Do When the One-Button Start Battery Is Dead?

Which has a higher ground clearance, the Yaris L or the Vios?

What are the hazards of car-mounted electric kettles to vehicles?