When the low beam is on, does the width light stay on?

2 Answers
GabriellaLynn
09/02/25 7:53am
When the low beam is on, the width light stays on. Width light: Used to indicate the width of the car to alert others and when reversing. It is also known as the twilight running light, which is turned on when it is not completely dark. The next setting after the width light is the small light, and the setting after that is the headlight—low and high beams. Low beam: Generally, the low beam illuminates a distance within 50 meters, mainly to see the road ahead clearly. Typically, in areas with many vehicles, the low beam should be used because the high beam can cause glare for oncoming drivers. In areas with fewer vehicles and no streetlights, and when driving at higher speeds, the high beam should be used. Since the low beam provides a shorter viewing distance compared to the high beam, driving at higher speeds with the low beam on may not allow enough time to brake when an obstacle is spotted. Lighting sequence: All car models have the width light as the first setting. Then, by turning the switch, the second setting is the low beam, during which the width light remains on. This means that to turn on the low beam, the width light must first be activated, as the switch operates incrementally.
Was this review help?
8
4
Share
LaLucy
09/15/25 3:02am
From the perspective of a seasoned driver with years of experience, usually when you turn on the low beam headlights, the position lights (those small lights) will also come on. This is part of the standard design of a car, aimed at making the vehicle more visible in the dark and avoiding being overlooked by other vehicles. For instance, when I'm driving on the highway at night, I feel much more at ease when the combination of lights is on. If you find that they're not working, you might need to check the fuse or whether the bulb connections are loose—some older cars develop wiring issues over time. I also recommend doing a simple test: after starting the car and turning on the low beams, walk around the vehicle to see if all the position lights are functioning. Remember, the lighting system is crucial for driving safety, especially when visibility is poor, like during rainy weather.
Was this review help?
12
1
Share
Expand All
More Forum Discussions

What is the standard for headlight height adjustment?

Here are the standards for adjusting the height of car headlights: 1. Parallel: Drive the car onto a flat road, adjust the low beam points to coincide at a 30-meter distance, and adjust the high beam points to be parallel to the ground, with the wall parallel to the two high beam points. 2. Vertical: Park the car 7.6 meters away from the wall, ensuring the ground is level and the car is perpendicular to the wall. 3. Headlight distance: Measure the height from the ground to the center of the headlights and the distance between the two headlights. 4. Tape: Place a horizontal masking tape on the wall 0.1 meters below the headlight height, ensuring the tape is centered directly in front of the car.
19
0
Share

Should a small nail in a car tire be removed?

Whether to remove a small nail from a car tire depends on the specific situation: 1. If the nail is discovered early, do not pull it out. Try to drive to a repair station if possible, as this can save the trouble of changing to a spare tire; 2. If the tire is losing air slowly after being punctured by the nail, you should immediately reduce speed and drive slowly. Never continue driving at high speed or for long distances, as this could lead to a tire blowout; 3. If the tire is losing air quickly after being punctured, you should stop driving immediately. Change the tire on the spot or seek assistance. Continuing to drive not only risks ruining the tire completely but is also extremely dangerous.
19
5
Share

How to Route the Wiring for Installing a Dash Cam?

Installing a dash cam involves the following wiring steps: 1. Secure the dash cam to the rearview mirror; 2. Connect the power cable to the device and tuck the wire into the junction between the headliner and windshield; 3. Route the power cable down along the A-pillar seam; 4. Guide the power cable along the door seam towards the bottom of the glove compartment; 5. Run the power cable along the base of the glove compartment towards the cigarette lighter and insert the power plug into the cigarette lighter socket. Dash cams come in two types: suction cup-mounted and rearview mirror-mounted. Suction cup-mounted dash cams simply need to be affixed to an appropriate position. Rearview mirror dash cams are typically clip-on models that can be directly attached over the existing rearview mirror.
9
3
Share

Under what circumstances is wheel alignment necessary?

Wheel alignment is necessary in the following situations: 1. When driving on a straight road, if you need to grip the steering wheel tightly to prevent the vehicle from veering off course, it indicates that a wheel alignment is required; 2. If you feel the car body floating or unstable during normal driving, similar to turning or driving on rough roads, it suggests the need for a wheel alignment; 3. When one side of the front or rear tires shows significantly more wear than the other, a wheel alignment is also necessary; 4. If the car consistently pulls to the left or right while driving straight, it indicates the need for a wheel alignment; 5. After installing new tires or following collision repairs, steering, or suspension system maintenance, it is advisable to perform a wheel alignment.
10
1
Share

How long does it take to receive the new energy green license plate?

Normally, the license plate will be issued within about 7 working days, but the specific time may vary depending on the region. If you haven't received the license plate yet but need to use the vehicle urgently, you can apply for a temporary license plate at the vehicle management office. The validity period of a temporary license plate generally does not exceed thirty days. Below is an introduction to new energy vehicles: 1. Introduction: New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources (or use conventional vehicle fuels with new types of on-board power devices), integrating advanced technologies in vehicle power control and driving, resulting in advanced technical principles, new technologies, and new structures. 2. Classification: New energy vehicles include four major types: hybrid electric vehicles (HEV), battery electric vehicles (BEV, including solar-powered vehicles), fuel cell electric vehicles (FCEV), and other new energy vehicles (such as those using supercapacitors, flywheels, and other high-efficiency energy storage devices). 3. Advantages: Zero or near-zero emissions, reduced water pollution from oil leaks, reduced greenhouse gas emissions, improved fuel economy, improved engine combustion efficiency, smooth operation, and no noise.
10
3
Share

What Are the Effects of Insufficient Power in a Car Battery?

The effects of insufficient power in a car battery are: 1. Causes unstable engine idling; 2. Reduces actual fuel injection volume; 3. Weakens ignition energy; 4. Prevents the release of anti-theft alert; 5. Locks the audio system; 6. Causes related systems to malfunction. To determine the condition of the battery during maintenance, consider the following points: 1. Visual inspection—check for any deformation, bulging, leakage, cracks, burns, or oxide seepage at screw connections; 2. Load testing—if there are no visible abnormalities, operate the UPS in battery mode with a certain load. If the discharge time is significantly shorter than normal and the backup time does not recover after 8 hours of charging, the battery is considered aged.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.