When Should You Refuel Based on the Remaining Fuel in the Car Tank?

1 Answers
StDaisy
07/30/25 3:39am
You should refuel when the car tank has a quarter of fuel left. The steps for refueling are: 1. Slow down and drive into the gas station gently; 2. Turn off the engine before starting the refueling process; 3. After filling up, close the fuel nozzle before restarting the car. Precautions for car refueling include: 1. Do not use mobile phones; 2. No smoking; 3. Park, turn off the engine, and shut down the power. The reasons for turning off the engine while refueling are: 1. When the engine is running, gasoline, being an electrolyte, can cause electrical leakage in instruments, leading to short circuits or open circuits; 2. The exhaust pipe continuously emits waste gas, which may carry sparks, posing a safety hazard; 3. Operating instruments generate a lot of heat, accelerating gasoline evaporation, increasing the concentration of fuel-air mixture, which is hard to disperse and can easily ignite or explode.
Was this review help?
5
1
Share
More Forum Discussions

Symptoms of Incomplete Gasoline Combustion?

The following are the manifestations or symptoms of incomplete gasoline combustion: Insufficient vehicle power, slow acceleration, and decreasing power; Exhaust fumes from the tailpipe have a very strong and pungent odor; Black or white smoke from the exhaust pipe. The following are solutions for incomplete gasoline combustion: (1) Clean the engine, transmission, and fuel injectors; (2) Repair the exhaust gas recirculation system and combustion chamber; (3) Use high-quality gasoline. An engine is a machine capable of converting other forms of energy into mechanical energy, which can be used either as a power generation device or refer to the entire machine including the power unit. Types of engines include internal combustion engines (such as gasoline engines), external combustion engines (such as Stirling engines, steam engines), and electric motors.
15
0
Share

What is the Difference Between the Dodge Hellcat and Demon?

Dodge Demon and Hellcat are models of the same class, with no significant changes in appearance but some differences in power. Here are some details about the Dodge Hellcat and Demon: Appearance: The Dodge Demon is the ultimate performance version of the series, featuring a more exaggerated design and equipped with the largest hood heat extractor among mass-produced cars worldwide, with an area twice that of the Hellcat. Power: In terms of power, the Demon is equipped with a 6.2L V8 supercharged engine, delivering a maximum power of 840 horsepower and a peak torque of 1004 Nm. The car incorporates extensive lightweight design, making it 105kg lighter than the Hellcat.
12
1
Share

Where is the AdBlue Nozzle Located?

AdBlue nozzles are installed on the exhaust pipes of diesel vehicles. Their function is to quantitatively inject urea aqueous solution for post-exhaust treatment, thereby reducing nitrogen oxide emissions. The AdBlue nozzle is a wear-prone component and requires frequent cleaning and replacement. Below are methods for cleaning the AdBlue nozzle: 1. Ultrasonic cleaning: A small ultrasonic cleaner (the type used for cleaning glasses) can be used. 2. It is recommended to use hot water as the cleaning solution, with the injection end immersed in the liquid (ensure the electrical connector does not get wet). 4. While cleaning the nozzle with ultrasound, perform a functional test to drive the nozzle for better cleaning results.
15
2
Share

How often is it reasonable to maintain a Honda CR-V?

After the first maintenance, it is sufficient to perform maintenance every 6 months or 5,000 kilometers. Change the engine oil every 5,000 kilometers, and replace the air filter and oil filter every 10,000 kilometers. Relevant information about car maintenance is as follows: Introduction: Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Maintenance Scope: Modern car maintenance mainly includes the maintenance of the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc.
14
3
Share

What are the methods of engine lubrication?

Engine lubrication methods include: 1. Pressure lubrication: Using an oil pump to continuously deliver lubricating oil under a certain pressure to the friction surfaces, forming an oil film of a certain thickness that can withstand mechanical loads without rupturing, effectively separating the two friction components to achieve reliable lubrication; 2. Periodic lubrication: For less critical and scattered components, lubrication is achieved by periodically applying grease; 3. Splash lubrication: Utilizing certain moving parts of the engine, primarily the crankshaft and camshaft, to splash oil droplets and mist onto friction surfaces for lubrication. The lubrication intensity of various engine components depends on their environment, relative motion speed, mechanical load, and thermal load.
4
1
Share

What to Do About Abnormal Noises When Raising or Lowering Car Windows?

Here are the reasons and solutions for abnormal noises when raising or lowering car windows: 1. A large amount of dust has accumulated in the rubber guide channel of the car window. Clean the dust promptly. 2. The car window seal has aged. Replace the car window seal promptly. 3. Abnormal noise occurs in the car window gear set. Apply lubricating oil to the car window gear set promptly. Additional Content: Methods for Removing Ice from Car Windows: 1. Physical de-icing. Use a plastic scraper or glass frost remover to scrape off the ice from the car. 2. Chemical de-icing. Use a spray de-icer to remove ice from the car.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.