When Should the Position Lights Be Turned On?

1 Answers
Ida
07/30/25 2:04am
Position lights should be turned on during nighttime driving, in the evening when visibility is poor, during rainy conditions with reduced visibility, and in foggy weather with low visibility. Below is relevant information about position lights: 1. Introduction to Position Lights: Position lights are the outermost lights located at the front and rear of the vehicle. Large trucks also have position lights on the roof and sides. Installed along the edges of the vehicle's roof, these lights indicate both the height and width of the vehicle. 2. Function of Position Lights: Position lights serve as warning lights to alert other vehicles. Front position lights typically emit white light, making it easier for oncoming vehicles to discern the vehicle's width and position, thereby enhancing safety. In simple terms, the primary purpose of position lights is not aesthetics but rather to improve the vehicle's visibility, ensuring other road users can clearly see the approaching vehicle.
Was this review help?
1
0
Share
More Forum Discussions

Does BMW have a jack?

BMW does not have a jack. Car jack: A car jack is placed in the car's toolbox and is used to lift the vehicle body when changing a spare tire. Car jacks include pneumatic jacks, electric jacks, hydraulic jacks, and mechanical jacks, with hydraulic and mechanical jacks being the most commonly used. Car jacks are used to replace spare tires, making it convenient to change a flat tire when driving. Precautions for using a jack: When using a car jack, it is important to pay attention to the placement position. Generally, cars have designated spots for jack placement. Owners should not place the jack under the bumper, as this can easily damage the car's bumper. When using a car jack, passengers should not remain in the vehicle to avoid the risk of the jack slipping during use, which poses significant safety hazards. Before using the jack, the vehicle should be braked to ensure greater stability when changing the tire. In addition to using the brake, engine braking can also be employed for added stability. Before using the jack to change a tire, proper warning measures should be taken, such as placing a triangular warning sign behind the vehicle. On highways, the warning sign should be placed at least 150 meters away to alert passing vehicles and prevent secondary accidents.
5
5
Share

Is the BMW 740 a C-Class Car?

The BMW 740 is not a C-Class car, but rather a D-Class car. Common D-Class cars include models from several ultra-luxury brands such as the Mercedes-Benz S-Class, BMW 7 Series, Audi A8, Rolls-Royce, and Bentley. Others include the Jaguar XJ and Maserati Quattroporte series. Car Classification: This classification originates from Volkswagen's method of categorizing cars in Germany. It is not an authoritative standard but rather a set of reference values Volkswagen initially established for its platform strategy, which later became widely adopted. Car classifications generally include six levels: A00, A0, A, B, C, and D. D-Class Cars: Deluxe Class Cars specifically refer to long-wheelbase luxury vehicles. D-Class cars feature an elongated body, an imposing appearance, and a length of at least 5.1 meters. These cars offer spacious interiors and extremely luxurious configurations. While their powertrains may not be as powerful as those of supercars, they are more than adequate, with displacements typically above 3.0 liters. Common D-Class cars include models from ultra-luxury brands such as the Mercedes-Benz S-Class, BMW 7 Series, Audi A8, Rolls-Royce, and Bentley.
16
5
Share

Is the Baojun 1.5T Engine a General Motors Product?

The Baojun 1.5T engine is indeed a General Motors product, developed and manufactured according to General Motors' powertrain standards. The production line is located at SAIC's Qingdao base. The Baojun 1.5T engine model is LJO, with a maximum power output of 108 kW, maximum torque of 104 N·m, maximum horsepower of 147 Ps, maximum power speed of 5300 rpm, and maximum torque speed range of 2200-3400 rpm. For daily maintenance of the Baojun 1.5T engine, the following methods can be employed: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and oil filter. The quality of any grade of lubricating oil will deteriorate during use. After a certain mileage, the performance will degrade, leading to various engine issues. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures normal engine operation but also extends the overall lifespan of the radiator and engine.
10
1
Share

Where is the position light of Volkswagen Santana Vista?

The position light of Volkswagen Santana Vista is located on the fender above the front tires. It only lights up when the turn signal is activated or flashes when the hazard warning lights are turned on, serving as a warning to parallel vehicles. The position light will not illuminate unless the turn signal or hazard warning lights are activated. Other light positions of Volkswagen Santana Vista: Headlights, commonly known as high and low beams, are the largest lights on the front face of the car; rear position lights, located below the rear windshield as high-mounted brake lights, do not light up normally but form a triangular warning with the rear brake lights when the brake is pressed; fog lights, located at the very bottom of the front bumper, appear yellow and are symmetrically placed on both sides. The yellow-covered ones in the rear light assembly are also fog lights, used to warn vehicles in front and behind during heavy fog. How to turn on the lights of Volkswagen Santana Vista: There is a headlight knob on the left-hand side. Turning it one notch to the right activates the position lights, and turning it two notches activates the headlights. With the position lights already on, pulling the knob outward (like pulling a key) one notch activates the front fog lights, and pulling it two notches activates both front and rear fog lights.
16
2
Share

What does it mean when Mercedes-Benz detects tire pressure loss?

When the tire pressure check warning appears on a Mercedes-Benz, it indicates there may be an issue with the tire pressure. According to the international GBT2978-2008 standard, the recommended tire pressure for standard tires is 2.4-2.5bar. In winter, the tire pressure should be slightly increased by about 0.2bar based on the standard tire pressure. In summer, the tire pressure can generally be about 0.1bar lower than the standard to prevent tire blowouts due to high temperatures. There are generally three reasons for abnormal tire pressure in Mercedes-Benz vehicles: Abnormal tire pressure: The system will usually alert when the pressure is below 1.8bar or above 3.0bar. In this case, the tires need to be checked and the pressure adjusted. Tire pressure monitoring system not reset: If the tire pressure is not reset after inflating the tires, the system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply reset the tire pressure monitoring system to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving, it can also trigger the tire pressure warning light. In case of sensor damage, the only solution is to replace it with a new one.
14
1
Share

Which model is the Geely FE-7?

Geely FE-7 is the hatchback version of the Emgrand EC-7. The Emgrand EC7 comes with two powertrain options: The 1.8L model is still equipped with Geely's self-developed GETEC JLγ-4G18 CVVT all-aluminum engine, featuring CVVT (Continuously Variable Valve Timing) technology. It delivers a maximum output power of 102kW and a peak torque of 172N·m, with a specific output reaching 57.2kW per liter. In terms of parameters, it achieves top-tier performance among domestic 1.8L engines in its class. The newly introduced 1.5L model is powered by a 1.5L DVVT engine, producing a maximum power of 80kW at 6000rpm and a peak torque of 135N·m at 4800rpm. This newly added 1.5L engine is the same as the one used in the New Vision 1.5 model, employing DVVT technology (Dual Variable Valve Timing system for both intake and exhaust). Emgrand EC7 fuel consumption: The 1.5L version of the Emgrand EC7 has a fuel consumption of 8.2L/100km. The 1.8L CVT version consumes 9.0L/100km, while the 1.8L MT version has a fuel consumption of 8.9L/100km.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.