When should the first oil change be done for a new car?

2 Answers
McTimothy
07/25/25 7:20am
The first oil change for a new car should be done within 2,000 kilometers, with regular maintenance every 5,000 kilometers. Common maintenance tasks for vehicles in use mainly include: 1. Inspection, cleaning, replenishment, lubrication, adjustment, or replacement of parts; 2. Replacement of engine oil, oil filter, air filter, fuel filter, pollen filter, and spark plugs; 3. Inspection and replacement of transmission fluid. Car maintenance precautions: 1. The maintenance schedule and specific tasks for each maintenance session are detailed in the vehicle's maintenance manual; 2. Except under special circumstances, it is advisable to appropriately decline additional services recommended by the 4S dealership during maintenance.
Was this review help?
16
4
Share
MarleyLee
08/10/25 6:31pm
When I first bought my car, I researched the first maintenance issue. For a new car, the engine oil needs to be changed within the first 5,000 kilometers or six months, whichever comes first. This is because the engine produces a lot of metal shavings during the break-in period, which can mix with the oil and cause damage to the engine. The manufacturer's specified first maintenance interval is based on rigorous testing, and timely maintenance ensures optimal vehicle performance. I remember the new car manual clearly stated this time point—my Honda was serviced at just over 4,000 kilometers. During the oil change, they also checked the tires and brake system. Overall, maintenance is like a health check-up for your car—early detection leads to early solutions. Don’t assume a new car doesn’t need attention and delay maintenance; exceeding the deadline might void warranty benefits. Most first services are free, so missing it would be a waste.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

How to Open the Trunk from Inside the Envision?

To open the trunk from inside the Envision, press the button with the car logo to release the trunk, and rotate it to adjust the opening size of the trunk door. Taking the Envision 2021 532T Front-Wheel Drive Leading Edition as an example: this vehicle is manufactured by SAIC-GM Buick, classified as a midsize SUV, with a gasoline energy type. The dimensions are 4694mm in length, 1839mm in width, and 1686mm in height, with a wheelbase of 2750mm. It features a turbocharged intake form, front-wheel drive, electric power steering, a unibody structure, and an electronic parking brake.
6
0
Share

How to Reset the Oil Light on a Bora?

The method to reset the oil light on a Bora is: 1. Turn off the ignition switch and hold down the set button; 2. Turn on the ignition switch and press the button on the left side of the dashboard. The Bora is a compact car under FAW-Volkswagen. Taking the 2021 Comfort Smart Edition as an example, its body dimensions are: length 4663mm, width 1815mm, height 1462mm, with a wheelbase of 2688mm and a fuel tank capacity of 50l. The 2021 Comfort Smart Edition is equipped with a 1.2T turbocharged engine, paired with a 7-speed dual-clutch transmission, delivering a maximum horsepower of 116PS, a maximum power of 85kW, and a maximum power speed of 5000rpm.
16
5
Share

What are the reasons for vehicle body shaking after starting?

The reasons for vehicle body shaking after starting are: 1. Fuel system blockage; 2. Aging engine components; 3. Severe carbon buildup in the engine; 4. Incomplete combustion in the cylinders; 5. Poor tire balance condition; 6. Deformed wheel hub; 7. Deformed drive shaft; 8. Poor ignition system performance; 9. Low engine temperature; 10. Low lubricating oil temperature. Vehicle starting steps: 1. Insert the key into the ignition switch, turn it up one notch to activate the fuel pump for oil supply and initiate electrical equipment self-check; 2. Press the clutch pedal and turn the key further up to start the vehicle; 3. Depress the clutch pedal, shift gears, and release the handbrake.
16
3
Share

How to turn on the headlights of an Audi A3?

The method to turn on the headlights of an Audi A3: 1. Rotate the end of the light control lever forward to the first position to turn on the parking lights; 2. Rotate the end of the light control lever forward to the second position to turn on the low beams; 3. With the low beams on, gently push the light control lever forward to switch to high beams; 4. Pull it back to return to low beams. The Audi A3 is a compact car under FAW-Volkswagen. Taking the 2021 Audi A3 Sportback 35 TFSI Progressive Elegance as an example, its dimensions are 4343mm in length, 1815mm in width, and 1458mm in height, with a wheelbase of 2630mm. The body structure is a 5-door, 5-seat hatchback, with a fuel tank capacity of 51 liters and a curb weight of 1400kg.
13
1
Share

How to Remove the Rear Seat of the New Santana?

The method to remove the rear seat of the New Santana is: 1. Remove all the headrests from the rear seat; 2. Insert your hand at the junction between the seat base and the backrest, press downward and then push outward to release it. The New Santana is a compact car under SAIC Volkswagen, with body dimensions of: length 4473mm, width 1706mm, height 1469mm, wheelbase 2603mm, and a fuel tank capacity of 55 liters. The New Santana is equipped with a 1.4L naturally aspirated engine, paired with a 5-speed manual transmission, delivering a maximum horsepower of 90PS, a maximum power of 66kW, and a maximum power speed of 5500 rpm.
19
2
Share

Which parts of a car need carbon deposit cleaning?

Parts of a car that require carbon deposit cleaning include: 1. Engine combustion chamber; 2. Intake manifold; 3. Fuel injector; 4. Throttle body; 5. Spark plug; 6. Three-way catalytic converter. Carbon deposits are coke-like substances formed from unsaturated olefins and gums in fuel under high temperatures during engine operation. Methods for cleaning carbon deposits are: 1. Open the engine oil cap, pour in cleaner, close the cap, then idle the engine for about 10 minutes before shutting it off; 2. Remove the engine cover, detach the throttle body and clean it with carburetor cleaner; 3. Pour intake system cleaner into the reservoir of a cleaning device, connect it to the intake system, then start the vehicle to allow vacuum pressure to draw the cleaner into the intake passages.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.