When should the first maintenance for BMW X2 be performed?

Which generation of Shengrui transmission is used in the Besturn T99?

The Besturn T99 uses the third-generation Shengrui transmission. The Besturn T99 is a mid-to-large-sized SUV under the Besturn brand, with a wheelbase of 2870 mm, and dimensions of 4800 mm in length, 1915 mm in width, and 1685 mm in height. The Besturn T99 is equipped with a 2.0-liter turbocharged engine across all variants. The exterior design of the Besturn T99 is robust, featuring bold and straight lines that exude a commanding presence. In terms of interior design, the Besturn T99 adopts a style that balances technology and luxury, showcasing not only excellent design but also premium materials that enhance its luxurious feel.

10

2

Share

What does the yellow exclamation mark on the Tiguan indicate?

The reasons why the Tiguan displays a yellow exclamation mark: 1. Forgetting to release the handbrake or not releasing it completely; 2. Brake pads locking up in one of the four wheels; 3. Brake circuit malfunction or brake pedal stuck. This symbol indicates a fault in the vehicle's braking system, which could be due to excessive brake pad wear, damaged sensors, or insufficient brake fluid. The Tiguan has a length of 4506mm, width of 1809mm, height of 1685mm, and a wheelbase of 2684mm. The Tiguan is equipped with industry-leading 1.8TSI and 2.0TSI engines, features a 5-door, 5-seat SUV body type, and has a top speed of 190km/h.

10

1

Share

What is the tire specification for the Hyundai Elantra?

The tire specification for the Hyundai Elantra is 195/65R15. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must possess high load-bearing performance, traction performance, and cushioning performance. The Hyundai Elantra has dimensions of 4542mm in length, 1775mm in width, and 1490mm in height, with a wheelbase of 2650mm. The comprehensively improved dashboard features a naturally transitioning dual-tone textured panel, centralized and rationally arranged buttons, complemented by a blue backlit display, ensuring soft and clear overall lighting.

13

2

Share

What Causes Multi-Cylinder Misfire in Cars?

Car causes of multi-cylinder misfire: The air-fuel mixture in the cylinder fails to ignite or ignites with a delay. It is recommended to check the spark plugs, clean carbon deposits from the intake and exhaust valves, and then inspect whether there are issues with the turbocharger, such as wear or erosion of the turbocharger impeller. Delayed ignition is usually caused by abnormalities in a certain component or part, leading to unstable ECU regulation of the engine and failure to meet the theoretical values calibrated by the ECU, resulting in misfire. A multi-cylinder engine is an engine with more than two cylinders, composed of several identical single cylinders arranged on a single block sharing a crankshaft to output power. The more cylinders an engine has, the more evenly the crankshaft rotates, and the smaller the vibration. Multi-cylinder engines can have cylinder arrangements such as inline, V-type, and horizontally opposed, depending on factors like installation and cooling methods.

7

3

Share

What Causes the Engine to Buzz When Accelerating?

The reasons for engine buzzing when accelerating: 1. Exhaust pipe leakage: When there is a leak in the intake or exhaust pipe, the vehicle will produce a loud roaring sound as the exhaust rate increases during acceleration; 2. Dirty throttle valve: During acceleration, the engine load increases, requiring a higher throttle opening. If the throttle opening is not optimal due to dirt blockage, it can lead to poor air-fuel mixture ratio, resulting in noise during acceleration; 3. Engine misfire: An engine misfire refers to one or more cylinders not functioning properly, typically manifesting as insufficient vehicle power, severe exhaust pipe shaking, and clearly audible "popping" or thumping sounds from the engine.

17

4

Share

How to Judge the Distance on the Right Side of the Car?

Methods to judge the distance on the right side of the car: Use the right wiper and rearview mirror to estimate the distance. Generally, when the node of the right wiper aligns with the roadside, slightly steering to the left can achieve parking about 10cm from the curb. When the extension line of the lane divider is about 10cm from the lower left corner of the windshield, the vehicle is approximately 50 to 60cm from the left lane. Similarly, if there is a traffic barrier or curb on the left, this method can also be applied. When the edge of the car's front aligns with the lower edge of the license plate of the car ahead, the distance is about 0.5 meters. Judging the rear distance is much simpler with the assistance of a reversing camera or parking sensors, as the rear blind spot is relatively large. If observing from the interior rearview mirror, when the area below the engine hood of the rear vehicle is obscured, the distance to the rear vehicle is about 5 meters. Similarly, when the rear windshield of the following car is just visible in the rearview mirror, the distance is approximately 0.5 meters.

16

4

Share

When should the first maintenance for BMW X2 be performed?

Which generation of Shengrui transmission is used in the Besturn T99?

What does the yellow exclamation mark on the Tiguan indicate?

What is the tire specification for the Hyundai Elantra?

What Causes Multi-Cylinder Misfire in Cars?

What Causes the Engine to Buzz When Accelerating?

How to Judge the Distance on the Right Side of the Car?

How Many Kilometers Should a Sedan Be Serviced?

The Function of Car Bumpers

What is the material of a car bumper?

What material is a car bumper made of?