When should the first maintenance for a new car be done?

2 Answers
AliceLynn
07/30/25 12:52am
New cars generally require their first maintenance between 3,000 to 5,000 kilometers. The first maintenance items include: Changing the engine oil and oil filter, cleaning the air filter, checking whether the generator belt and wiper blades are damaged. Checking if the levels of various fluids are normal. Verifying if the tire pressure is correct and if there are any signs of uneven wear, bulges, or damage on the tires. Inspecting the car chassis, including the brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches. Ensuring all switches and lights in the car are functioning properly. Car maintenance precautions: Make an appointment in advance. Record any malfunctions or questions encountered while driving and inform the staff during the maintenance registration.
Was this review help?
17
1
Share
Leah
08/15/25 6:18am
When I first got my car, I was also confused about this. The salesperson said it’s either 5,000 km or 6 months, whichever comes first. But since my car often runs on rough construction sites, the mechanic suggested I do it every three months. The key points of the first maintenance are changing the oil filter and checking the chassis and tires. Remember, engine oil oxidizes and deteriorates after six months, so don’t just focus on the mileage. If you frequently drive on highways or park in a garage with less dust accumulation, you might stretch it a bit, but it’s best not to exceed the time specified on the first maintenance card—otherwise, the dealership might really refuse warranty coverage. My relative learned this the hard way. Oh, and don’t forget to bring the maintenance manual for the first service; manufacturers now keep system records.
Was this review help?
6
0
Share
Expand All
More Forum Discussions

How Often Should Semi-Synthetic Motorcycle Oil Be Changed?

Semi-synthetic oil should be changed every six months or approximately every 7,500 kilometers. Proper oil changes ensure that the vehicle operates within normal parameters while delivering better performance. Semi-synthetic oil is produced using semi-synthetic base oil, which is refined from mineral oil through hydrocracking technology. It consists of a 4:6 ratio of mineral oil to fully synthetic oil, making it an ideal transitional product from mineral oil to synthetic oil. The exact oil change interval may vary depending on the city, environment, and driving habits. If you live in a city with high dust levels, extremely low temperatures (below -20°C), or if your motorcycle is primarily used for short trips (each ride under 8 kilometers), it is recommended to change the oil more frequently—every 5,000 kilometers or every nine months. Keep track of your oil change intervals and pay attention to how the motorcycle performs after each change. If you notice smoother power delivery and quieter engine operation after an oil change, it may indicate that the previous interval was too long, and you should shorten the next interval. After a few adjustments, you will find the optimal oil change schedule for your motorcycle.
4
4
Share

What is the reason why the Volkswagen Sagitar does not move when in D gear without pressing the accelerator?

The reason why the Volkswagen Sagitar does not move when in D gear without pressing the accelerator is that the engine's throttle opening is too small, and the fuel injector's fuel supply is insufficient. Taking the Sagitar 2021 200TSI Manual Fashion Smart Connect Edition as an example: The manufacturer of this car is FAW-Volkswagen, the intake form is a compact car, the energy type is gasoline, and the transmission is a 5-speed manual. The car's length, width, and height are 4753mm, 1800mm, and 1462mm respectively, with a wheelbase of 2731mm. The body type is a 4-door, 5-seater sedan, the intake form is turbocharged, the drive mode is front-wheel drive, the power steering type is electric power steering, and the body structure is a unibody.
20
4
Share

What is the reason why the first gear of a manual transmission car cannot be engaged?

Manual transmission car cannot engage the first gear because the first gear teeth of the transmission are severely worn, and replacing a new gear teeth can solve the problem. Manual transmission, also known as manual gearbox, is a type of transmission device, the most basic type in automotive transmissions. Its function is to change the gear ratio, also known as the gear ratio, which uses the principle of leverage to amplify the engine torque with the large diameter gear of the low-speed gear with a longer radius, helping the vehicle to start moving forward. Manual transmission belongs to pure mechanical structure, so increasing the number of gears will inevitably increase the volume and mass, making the increase in gears limited. In contrast, automatic transmissions using planetary gear sets (AT) or steel belts (CVT) can compress the volume with technological advancements, thereby achieving the characteristic of increasing the number of gears without increasing the volume.
15
1
Share

What is the working principle of an oil pump?

The operation of an oil pump is achieved through the reciprocating motion of the plunger. The specific working principle is as follows: The suction and compression of oil by the oil pump are accomplished by the reciprocating motion of the plunger within the plunger sleeve. When the plunger is in the lower position, the two oil holes on the plunger sleeve are opened, connecting the inner cavity of the plunger sleeve with the oil passage in the pump body, allowing fuel to quickly fill the oil chamber. When the cam contacts the roller of the roller body, the plunger rises. Due to the movement of the plunger, fuel is squeezed out from the oil chamber and flows into the oil passage. This stroke is called the pre-stroke. When the plunger blocks the oil hole, the oil compression process begins. As the plunger moves upward, the oil pressure in the oil chamber increases sharply. When the pressure exceeds the spring force of the outlet valve and the upper oil pressure, the outlet valve is pushed open, and the fuel is forced into the oil pipe and delivered to the injector. Maintenance of the oil pump should pay attention to the following aspects: Water can corrode the oil pump, so substances containing water are prohibited from being evacuated by the oil pump. For substances containing a large amount of solvent, first remove most of the solvent in an oven before using the oil pump for evacuation. Use the vacuum pump in the correct sequence to prevent backflow. After using the vacuum oven, be sure to clean it thoroughly, wiping the glass window of the vacuum oven. Wipe off the surface rust-proof oil. Remove the rust-proof oil from the inner cavity of the governor and the inner cavity of the fuel injection pump, and add the specified grade of lubricating oil.
13
5
Share

What are the reasons for a car horn suddenly not working?

The reason for a car horn suddenly not working is contact erosion. If the horn is pressed for a long time, it can easily cause the horn contacts to erode, resulting in a certain impedance that weakens the current flowing through the electromagnetic coil (reducing the electromagnetic attraction). At this point, it will definitely be unable to attract the armature to drive the diaphragm to vibrate normally, leading to a hoarse sound from the horn or even the possibility of it not working at all. The horn is the sound signal device of a car. During the driving process, the driver can emit necessary sound signals as needed and according to regulations to warn pedestrians and alert other vehicles, ensuring traffic safety. It is also used for urging movement and transmitting signals.
15
1
Share

Why is the photo on the driver's license blue?

The photo on the driver's license is not blue, but white. According to the "Road Traffic Safety Law of the People's Republic of China," the photo on the driver's license must have a white background. White, red, and blue background photos are used for the following three types of documents: white background photos are used for ID cards, passports, visas, driver's licenses, etc.; red background photos are used for insurance, medical insurance, IC cards, temporary residence permits, wedding photos, etc.; blue background photos are used for graduation certificates, work permits, resumes, Hong Kong and Macau travel permits, passports, etc. In addition to the background color, there are other requirements for driver's license photos, as follows: No uniforms should be worn, the portrait should be clear, with rich layers, natural expression, and no obvious distortion; The photo size should be 32mm x 22mm, with a head width of 14mm to 16mm and a head length of 19mm to 22mm; The photo can be pasted or digitally printed; The shooting location should be the vehicle management office or a photo studio with a legitimate business license. Both men and women should not wear earrings, and those who need vision correction should wear glasses; Women's hair should not be loose, and men's hair should not be too long; The head should occupy about two-thirds of the photo; Applicants applying for a motor vehicle driver's license or temporary motor vehicle driving permit must provide a front-facing, hat-free, color, half-body ID photo taken within the last 6 months.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.