When is the first maintenance generally due for the Volkswagen Bora?

1 Answers
DiCharles
07/30/25 5:04am
The first maintenance for the new Volkswagen Bora is due within six months or 7,500 kilometers, whichever comes first. The first service follows the principle of whichever condition is met first. However, it is advisable to perform the first maintenance earlier because during the break-in period, the engine cylinders undergo a wear-in process, resulting in more metal particles in the engine oil and oil filter, and the oil gets dirty faster. Continuing to use the vehicle under these conditions can accelerate engine wear. Below are some relevant details: 1. The new Bora comes with a two-year or 60,000-kilometer warranty (whichever comes first). For the 1.6L model, it is recommended to perform routine maintenance every 15,000 kilometers, while the 1.4TSI model should be serviced every 10,000 kilometers, including oil and oil filter replacement. 2. Within 60,000 kilometers, both models are recommended to have the fuel filter, cabin air filter, and spark plugs replaced every 30,000 kilometers, and the transmission fluid replaced every 60,000 kilometers. However, there is a difference in the replacement intervals for the air filter. The 1.6L model is recommended for replacement every 30,000 kilometers, while the 1.4TSI model should be replaced every 20,000 kilometers.
Was this review help?
11
1
Share
More Forum Discussions

How Often Should the Transfer Case Oil in a Prado Be Changed?

The transfer case oil in a Prado should be changed every 50,000 to 80,000 kilometers. It is essential to replace the transfer case oil regularly; otherwise, it may lead to damage to the transfer case. Function of the Transfer Case: The transfer case is a device that distributes the engine's power, directing it to the rear axle or simultaneously to both the front and rear axles. In vehicles equipped with a transfer case, power is first transmitted from the driveshaft to the transfer case, which then distributes it to the front and rear axles. It allows switching between rear-wheel drive and four-wheel drive and is commonly used in rugged off-road vehicles. Advantages of the Transfer Case: Pure mechanical structure ensures high reliability; enables a 50:50 power distribution; enhances the vehicle's off-road capability. Disadvantages of the Transfer Case: Lacks a differential, making turning impossible in four-wheel-drive mode; no synchronizer, so switching can only be done when the vehicle is stationary.
19
2
Share

What kind of oil should be used for Audi 1.4T?

Audi 1.4T engine is more suitable to use 0w-30 or 5w-30 oil viscosity. These two kinds of oil viscosity are slightly lower, the engine running resistance is lower, and the fuel consumption can also be relatively lower. High-temperature type (such as SAE20-SAE50): The number indicates the viscosity at 100 degrees, the larger the number, the higher the viscosity. Low-temperature type (such as SAEOW-SAE25W): W means only for winter, the smaller the number, the lower the viscosity and the better the low-temperature fluidity. All-weather type (such as SAE15W/40, 10W/40, 5W/50): It means that the viscosity grades at low temperature meet the requirements of SAE15W, 10W, 5W respectively, and the viscosity grades at high temperature meet the requirements of SAE40, 50 respectively, which belongs to the winter and summer universal type.
19
4
Share

What are the functions of the three buttons on the Honda CR-V key?

Honda CR-V key has three buttons: lock, remote start, and unlock. Pressing the lock or unlock button will lock or unlock all doors: When the lock or unlock button on the remote is pressed, all doors and the tailgate will lock or unlock. If the doors are not opened within 30 seconds after unlocking via the remote transmitter, they will automatically relock. Carrying the key within 80cm of the door allows direct door opening: When carrying the smart key remote, you can directly open the doors without pressing the unlock button within an 80cm radius of the door handle. The door lock/unlock indicator lights will flash: When the doors are locked or unlocked, all exterior turn signal lights and two indicator lights on the instrument panel will flash.
10
2
Share

Why is the Mercedes-Benz dashboard flashing continuously?

The reason the Mercedes-Benz dashboard keeps flashing is due to an engine fault. Introduction to the car dashboard: The car dashboard is a device that reflects the working status of various vehicle systems. Categories of car dashboards: Under the faceplate of modern car dashboards, various indicator lights or warning lights are installed, such as coolant level warning lights, fuel level indicators, washer fluid level indicators, charging indicators, high/low beam indicators, transmission gear indicators, anti-lock braking system (ABS) indicators, traction control indicators, airbag (SRS) warning lights, etc.
16
1
Share

What is the weight of the Mercedes-Benz CLA200?

The weight of the Mercedes-Benz CLA200 is approximately 1.75 tons. Unspecified curb weight parameters: This refers to the vehicle's curb weight. If the curb weight parameter is not specified on the motor vehicle driving license, the taxable tonnage is calculated as the difference between the total mass and the approved load capacity, or the taxpayer may provide relevant materials that can confirm the vehicle's curb weight. No relevant parameters recorded and unable to provide materials: If the motor vehicle driving license does not record relevant parameters and the taxpayer is unable to provide relevant materials, the taxpayer should be directed to the vehicle management department to supplement the relevant data. If the taxpayer does not supplement the relevant data, the tax authority shall determine the tax based on the data recorded on the motor vehicle driving license.
5
0
Share

What is the size of the LaCrosse steering wheel?

The diameter of the LaCrosse steering wheel is approximately 37 centimeters for the rubber version and 38 centimeters for the leather version. Components of the steering wheel: The steering wheel is a round device used to control the direction of cars, ships, and airplanes. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. It mainly consists of a skeleton, foam, and the driver's airbag. Using three points to control the steering wheel: Hold the steering wheel firmly with both hands, ensuring body support points and grip points, and control the steering wheel using three points. Decelerate in advance: Avoid excessive speed to prevent vehicle skidding. Take a small turn when turning right and a wide turn when turning left. Coordinate steering wheel operation with driving speed during turns: Adjust the steering wheel operation according to the road curvature and driving speed during turns. When turning, align the left roadside line with the left corner of the car's front and the right roadside line with the right corner of the car's front.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.