When is the first maintenance for the Polo?

1 Answers
DeAutumn
07/29/25 8:50pm
According to the vehicle maintenance manual, the first maintenance interval for the new Polo model is 7,500 kilometers or 6 months (whichever comes first), and the second maintenance interval is 15,000 kilometers. After that, owners should visit the 4S dealership for maintenance every 15,000 kilometers. The reasons for requiring maintenance are as follows: 1. Internal structure: During the break-in period, mechanical components inside the car are highly likely to experience mechanical wear, generating small debris. If these small particles are not removed in time, they may cause unnecessary damage to the vehicle. 2. Engine oil: National regulations require engine oil to have a shelf life of up to 5 years, but once poured into the engine, the oil's effective period is only 6 months. Considering the time from factory production to delivery, the old oil inside may have already expired. 3. Quality and safety: Although every car undergoes strict testing procedures before leaving the factory, machines are still machines, and any test may contain elements of chance.
Was this review help?
7
5
Share
More Forum Discussions

What car has a diamond-shaped logo?

The diamond-shaped logo belongs to the French automaker Renault. Here is some information about Renault: 1. The company is named after its founder Louis Renault, and its graphical trademark consists of four interlocking diamonds, symbolizing the unity of the three Renault brothers with the automotive industry. It represents Renault's ability to compete, survive, and develop in infinite (four-dimensional) space. 2. Renault is a French vehicle manufacturer, one of the oldest automobile companies in the world and among the top ten automotive companies globally. Renault is the largest state-owned enterprise in France.
10
4
Share

Where is the Volvo cabin air filter located?

Volvo cabin air filter is located inside the glove compartment on the front passenger side. To replace the Volvo cabin air filter, follow these steps: 1. Remove the glove compartment: There are two screws at the bottom of the glove compartment, remove them. 2. Remove the panel on the left side of the front passenger (the panel next to the left foot), this cover can be removed directly. 3. The fuse box is blocking the filter cover, so remove the fuse box first. 4. After removing the fuse box, you can see the cabin air filter cover. Open the cover to access the cabin air filter, then remove the old filter and install the new one.
20
0
Share

Is MG a Domestic Car Brand?

MG is classified as a domestic car. The brand originates from the UK, but production takes place domestically. Below is additional information about MG: 1. MG, short for Morris Garages, is a British automotive brand renowned for its iconic MG series of open-top sports cars. MG sports cars have long been celebrated for their distinctive design, meticulous craftsmanship, and superior performance. 2. On July 22, 2005, Nanjing Automobile Group Co., Ltd. successfully acquired British MG Rover and its engine production division, marking the first instance of a Chinese enterprise acquiring a renowned foreign car manufacturer. The post-acquisition entity was named Nanjing MG Automobile Co., Ltd. 3. The new company consolidated the assets and resources of the former British MG Rover and Nanjing Automobile Group, integrating world-class manufacturing equipment, R&D facilities, vehicle and engine production technology, top-tier technical management talent, and the MG brand under one umbrella.
4
5
Share

How many liters of coolant are needed for a Volkswagen CC coolant replacement?

Replacing the coolant in a Volkswagen CC requires 4-6 liters, and it is generally recommended to be done every 2 years or 40,000 kilometers. Method for replacing coolant: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leaks or cracks in the pipes, with a particular focus on the five-way hose. The five-way hose gets its name from having five connections to different parts of the vehicle. The coolant flows through the five-way hose and is then distributed to various parts of the car to function. If there are any signs of coolant leakage in this area, the hose should be replaced or the connections re-secured as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir and continue filling it until water flows continuously through the engine cooling system. Then, start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water coming out of the reservoir will have a faint pink color. Continue adding clean water until the outflowing water is clear. Note: Remember to remove the heater hose and drain the water from the heater core. After draining the water for about an hour, add the new coolant through the radiator hose. This allows the coolant to flow quickly into the radiator. Then, add another container of coolant to the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level will drop slightly as air is purged from the cooling system. Top up the coolant again until it reaches the "MAXT" mark on the reservoir.
17
1
Share

Does the new BMW X1 have four-wheel drive?

The new BMW X1 does have four-wheel-drive models, but only those equipped with the 2.0-liter turbocharged engine. Below is some extended information about the BMW X1: 1. The new BMW X1 uses two types of engines: one is a 1.5-liter turbocharged three-cylinder engine, and the other is a 2.0-liter turbocharged four-cylinder engine. 2. The 1.5-liter turbocharged three-cylinder engine delivers 140 horsepower and a maximum torque of 220 Nm. This engine reaches its maximum power at 4600 to 6500 rpm and its maximum torque at 1480 to 4200 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a 7-speed dual-clutch transmission. 3. The four-wheel-drive models use an 8-speed automatic transmission, while the front-wheel-drive models use a 7-speed dual-clutch transmission. The four-wheel-drive models are equipped with an on-demand four-wheel-drive system and use a multi-plate clutch-type central differential.
7
2
Share

How Many Cylinders Does the MG6 Engine Have?

The MG6 is equipped with the 'Blue Core' SGE20T four-cylinder engine. This 1.5-liter turbocharged engine delivers a maximum power of 169 horsepower and a peak torque of 250 Nm. The 1.5T15E4E engine in the MG6 is currently produced at SAIC's Lingang factory and is paired with either a 6-speed manual transmission or a 7-speed DCT transmission. Below are relevant details: 1. The 1.5T engine in the MG6 is model 15E4E. SAIC Motor and General Motors jointly developed two series of direct-injection engines: the SGE (Small-Gasoline-Engine) series and the MGE (Medium-Gasoline-Engine) series. 2. The MG6 features technologies such as centrally-mounted direct injection, low-inertia exhaust turbocharger, high-pressure fuel injection, integrated exhaust manifold in the cylinder head, and variable displacement oil pump. While these technologies are not exclusive or groundbreaking, they contribute to the engine's strong performance and balanced fuel efficiency. The official thermal efficiency of the engine is 37.5%. To achieve higher transmission efficiency, the MG6 is fitted with a 7-speed DCT transmission, which adopts a dry structure and can handle a maximum input torque of 250 Nm with a transmission efficiency of up to 97%.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.