···
Log in / Register

When is the best time to add fuel additives?

1Answers
AnnaDella
09/08/2025, 12:20:21 AM

It is recommended to start using fuel additives after the first maintenance of a new car. The following is a related introduction about the functions of fuel additives: Cleaning effect: The effect of this function is not immediate, and its value can only be reflected through long-term use. Engines that use fuel additives over a long period will have significantly less carbon buildup. Fuel saving: Additives also have a fuel-saving effect, although it is not very noticeable, with savings of only about 5%. The effect might be slightly more obvious for cars that frequently travel long distances. The quality of additives available on the market is hard to guarantee, and using inferior additives can be harmful rather than beneficial. It is best to purchase them from 4S stores, even though the price may be higher, as at least you can hold them accountable if any issues arise.

Was this review help?
113
Share
More Q&A

How to Deal with Fogging on the Inside of the Windshield?

Here are the methods to deal with fogging on the inside of the windshield: 1. Air Conditioning Defogging: Turn on the front window defogging mode, set the fan speed to the maximum, turn on the A/C switch, and then adjust the temperature to the lowest setting to remove the fog on the glass. 2. Air Convection: Simply open the car windows to increase air convection, reduce the temperature difference between the inside and outside of the car, and weaken the conditions for fog formation. 3. Anti-Fog Spray: Evenly spray the anti-fog agent on the glass surface, then wipe it clean with a dry towel. The principle is to use surfactants to leave a protective film on the glass surface, altering the surface tension of water molecules, causing fog droplets to coalesce into larger droplets, thereby not obstructing the view.
115
Share

Why Doesn't the Automatic Transmission Car Move When Releasing the Brake?

Automatic transmission cars not moving after releasing the brake don't necessarily indicate a vehicle issue; it requires analysis based on actual conditions. Generally, it can be divided into the following situations: 1. On very steep slopes, it's normal for an automatic transmission car not to move when releasing the brake: On extremely steep slopes, due to inertia, resistance increases. For the car to move, the forward power must exceed the resistance (excluding cases utilizing inertial force). In this scenario, simply pressing the accelerator can solve the problem. 2. Some car models have transmission settings where the car won't move without pressing the accelerator: For example, Volkswagen's new dual-clutch transmission. Even if the gear is in D, the car will automatically disconnect the power link without pressing the accelerator, effectively putting it in neutral.
120
Share

What are the symptoms of excessive valve clearance?

Excessive valve clearance mainly manifests in the following symptoms: 1. If the engine's valve clearance is too large, there will be continuous crisp sounds after starting the engine, which is most noticeable during cold starts. 2. Excessive valve clearance causes delayed opening and early closing of the intake and exhaust valves, shortening the intake and exhaust time, reducing the valve opening angle, altering the normal valve timing, resulting in insufficient engine intake and incomplete exhaust. 3. It also leads to a decrease in engine power, while causing impact and noise between components in the valve train, accelerating wear.
119
Share

How to Stop Windshield Wipers in the Middle Position?

Here are the steps to stop windshield wipers in the middle position: 1. First, power on the vehicle and activate the wiper function, setting the wipers to any speed setting. 2. Observe the wipers, and when they reach the desired middle position, turn the ignition key to the OFF position. This will cause the wipers to stop at the center of the windshield. Below is some extended information about wipers: 1. Windshield wipers, also known as wiper blades or windscreen wipers, are primarily used to remove raindrops and dust from the vehicle's windshield, thereby improving driver visibility and enhancing driving safety. 2. Due to legal requirements, almost all vehicles worldwide are equipped with wipers.
113
Share

Reasons for Car Wiper Malfunction?

Car wiper malfunctions are primarily caused by the following reasons: 1. Fuse blown: loose wires or poor contact; damaged or poor contact in the wiper control switch; armature winding open circuit or gear reducer. 2. Low voltage or poor switch contact: dirty contact surface between the wiper blade and glass; poor lubrication in motor bearings and gear reducer gears; poor brush contact or weak spring. 3. Wiper blade fails to self-reset: the wiper motor cannot stop at the automatic stop position, mostly due to a damaged control switch, poor operation of the automatic reset device, or an open circuit in the connecting wires.
106
Share

When to Turn on the AC in a Car?

When the weather is hot and you need to turn on the air conditioning to cool down, you can turn on the AC. Here is some introduction about the AC switch: 1. Car air conditioning is divided into cold air conditioning and hot air conditioning. Hot air conditioning does not require turning on the AC, you only need to turn on the blower to use the engine's heat for heating; while cold air conditioning requires turning on the AC switch to make the air conditioning compressor work to produce cold air. 2. In addition, mid-to-high-end car models will have an additional AUTO button, which means automatic air conditioning. When the AUTO button is turned on, the vehicle's computer will automatically identify whether to turn on warm air or cold air through temperature sensors.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.