When is it not necessary to paste the car insurance sticker?

1 Answers
LaAndrew
07/30/25 5:21am
Since 2018, the car insurance sticker no longer needs to be pasted, but this does not mean that the car does not need to be insured. Additional information: 1. Relevant laws: Compulsory traffic insurance is one of the types of car insurance that must be purchased as stipulated by the state. The compulsory traffic insurance sticker must still be pasted on the car. According to the "Road Traffic Safety Law", any vehicle driving on the road without the inspection qualification sticker or compulsory traffic insurance sticker, or without carrying a driver's license or vehicle license, will be detained by the public security traffic management department in accordance with the law. The compulsory traffic insurance sticker and the motor vehicle inspection qualification sticker should be pasted in the upper right corner of the motor vehicle. Failure to paste or violation of regulations will result in a fine. 2. Notes: The environmental protection sticker for motor vehicles also does not need to be pasted. In the future, all vehicle-related inspection information can be queried in the local vehicle management database. Pickup trucks will be treated the same as family cars, and there is no need to paste insurance stickers or environmental protection stickers. The reflective strips on the rear of the vehicle also do not need to be pasted. Although these stickers do not need to be pasted, car insurance must still be purchased in accordance with regulations, which is also for the safety of the car owner. Remember to bring your driver's license and vehicle license when you go out.
Was this review help?
3
1
Share
More Forum Discussions

Do You Need to Press the Brake When Shifting Gears in a Manual Transmission Car?

When shifting gears in a manual transmission car, you do not need to press the brake, but you must first press the clutch pedal all the way down. The method for using the clutch pedal is as follows: 1. Starting: Quickly lift the clutch pedal until reaching the semi-engaged point, then slow down the lifting speed; 2. Shifting: Press and release the clutch pedal swiftly, ensuring coordination with the accelerator; 3. Posture: Place the sole of your left foot on the clutch, with your heel touching the floor, and adjust the seat so that you can fully depress the clutch with your leg slightly bent. Precautions for using the clutch in a manual transmission car include: 1. Avoid keeping the clutch pressed for long periods or resting your foot on the pedal to prevent premature wear of the release bearing; 2. Do not press the clutch first during emergency braking to avoid losing engine braking.
3
0
Share

What type of engine oil should the Teana be changed to?

Teana should use 0w20 or 5w30 grade engine oil. Engine oil serves functions such as lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. Engine oil consists of two parts: base oil and additives. The base oil is the main component of the lubricant, while additives compensate for any deficiencies in the base oil's performance. The Teana is a mid-size sedan produced by Dongfeng Nissan, with body dimensions of 4901mm in length, 1850mm in width, and 1450mm in height, and a wheelbase of 2825mm. The vehicle is equipped with a 2.5-liter naturally aspirated engine, delivering a maximum power of 141kw and a peak torque of 244nm.
11
2
Share

How to Shift Gears?

Methods for shifting gears: 1. D gear shifting - After stepping on the brake to start the car, move the gear lever forward to the D position, release the handbrake, and slowly press the accelerator. Once the car starts moving, release the brake and press the accelerator to drive. The car will automatically shift between gears 1 to 4 based on speed. 2. P gear shifting - When parking the car, shift into P gear after the vehicle is completely turned off. Do not shift into P gear during normal driving to prevent damage to the vehicle. 3. L gear (low gear) shifting - When driving in snowy or icy conditions or encountering traffic jams, shift into L gear to keep the gear between 1 and 2, reducing fuel consumption and wear. 4. R gear (reverse gear) shifting - When reversing the car, shift into R gear. Ensure the vehicle is completely stopped before shifting into reverse. Do not shift into R gear during normal driving. 5. N gear (neutral gear) shifting - Use N gear for temporary parking. When shifting into N gear, make sure to engage the handbrake.
2
3
Share

Where is the reverse light wire of Audi Q5?

Audi Q5 reverse light wire is located in the two square covers for towing on the rear bumper. Remove the cover to find a cross-head screw inside. After removing the screw, the taillight can be taken off. The white wire is the reverse light wire, and the blue wire is the power supply wire. The Audi Q5 is a dynamic and versatile SUV with body dimensions of 4629mm in length, 1898mm in width, and 1655mm in height, with a wheelbase of 2807mm. In terms of appearance, the Audi Q5 features a distinctive large grille front face, with an overall stylish and attractive design, along with smooth and flowing body lines. For the interior, the Audi Q5 has a reasonably simple layout, rich and practical configurations, and a strong sense of technology; the cabin is finely crafted with high-quality materials.
9
0
Share

How to Reset the Maintenance Light on a Landwind Xiaoyao?

To reset the maintenance light on a Landwind Xiaoyao, follow these steps: 1. Turn on the ignition switch to power up the entire vehicle; 2. Press and hold the reset button on the right side without releasing it, then turn off the ignition switch; 3. After the instrument screen completely turns off, turn the ignition switch back on to power up the vehicle again; 4. Once the maintenance reminder disappears, release the reset button on the right side, and the maintenance light will be reset. The Landwind Xiaoyao is a compact SUV under the Landwind brand. It measures 4439mm in length, 1835mm in width, and 1580mm in height, with a wheelbase of 2700mm. It is equipped with a 1.5T engine (model JX4G15B5L) with a maximum power of 20kW, paired with a six-speed CVT transmission.
4
0
Share

How to Determine if a Car Battery is Fully Charged?

To determine if a car battery is fully charged, you can use a multimeter to measure the voltage. A reading above 12.5 volts indicates that the battery is fully charged. The functions of a car battery include: 1. Providing power to the starting system, ignition system, and electronic fuel injection system when starting the engine; 2. Supplying power to the vehicle's electrical equipment when the engine is off or idling at low speed; 3. Assisting in powering electrical devices when the generator's output is insufficient. Methods to maintain a car battery are: 1. Start the car regularly to charge the battery; 2. Add distilled water or a specialized replenishing fluid when the electrolyte is low; 3. Frequently check if the small holes on the battery cover are ventilated during daily driving; 4. Inspect the positive and negative terminals for signs of oxidation; 5. Check all parts of the circuit for aging or short circuits; 6. Turn off all electrical devices when leaving the car.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.