When does the manual self-cleaning of Great Wall Fengjun 5 activate?

1 Answers
MichaelRose
07/30/25 5:25am
Great Wall Fengjun 5's manual exhaust self-cleaning will automatically activate during normal vehicle operation. Maintaining the engine speed at 2000 RPM will enable the system to automatically clean carbon deposits from the exhaust. Below are specific details about the Fengjun 5: 1. Engine Type: The Fengjun 5 is a pickup truck under the Great Wall brand, equipped with a 2.4L naturally aspirated engine that delivers a maximum torque of 230 Nm, paired with a 5-speed manual transmission. 2. Body Dimensions: The Fengjun 5 measures 5095mm in length, 1800mm in width, and 1740mm in height, with a wheelbase of 3050mm. It features a front-engine, rear-wheel-drive configuration. 3. Suspension System: The vehicle is equipped with a double-wishbone independent front suspension and a leaf spring non-independent rear suspension, with tire specifications of 235/70R16.
Was this review help?
10
2
Share
More Forum Discussions

Does Drilling Holes for Mud Flaps Installation Affect the Car?

Yes, drilling holes for mud flaps installation typically affects the car in several ways, including reduced ground clearance, part rusting, etc. Reduced Ground Clearance: Mud flaps will lower the ground clearance of the car, affecting its off-road capability. Part Rusting: Installing mud flaps requires drilling holes in the car body for screws, which can allow rainwater to seep in and cause rust over time. Mud Flaps Turn into "Mud Scrapers": When driving on mountain roads or muddy terrain, dirt and debris can accumulate on the flaps, turning them into mud scrapers. Vehicle Instability and Increased Noise: Mud flaps can disrupt the car's aerodynamic design, creating wind resistance at high speeds, leading to instability and increased chassis noise.
5
3
Share

What is the name of the white color on the ŠKODA KAROQ?

ŠKODA KAROQ's Glacier White is a plain white. The relevant introduction of KAROQ is as follows: Model Positioning: The ŠKODA KAROQ is a compact multi-functional SUV newly designed by ŠKODA, positioned between the KODIAQ and KAMIQ. Powertrain System: The KAROQ is equipped with two turbocharged direct-injection engines from the EA211 series: the TSI230 and TSI280, paired with a 7-speed dual-clutch transmission. The TSI280 model has a maximum torque of 250Nm. The KAROQ's combined fuel consumption per 100 kilometers is 5.9L. It also features standard engine start-stop function and brake energy recovery system across the entire range, offering both robust power output and excellent fuel economy.
18
1
Share

What Causes High Engine Oil Temperature in Volkswagen Cars?

High engine oil temperature in Volkswagen cars can be caused by insufficient oil level, malfunctioning oil pump, clogged oil cooler, etc. Specific reasons are as follows: Insufficient Oil Level: When the oil level is insufficient or too high, it can easily lead to excessive oil temperature. Solution: Ensure the engine operates with the correct oil level, preferably between the upper and lower marks on the dipstick—neither too high nor too low. Malfunctioning Oil Pump: A faulty oil pump or insufficient oil delivery can result in inadequate oil pressure and poor heat dissipation. Solution: Monitor the oil pressure gauge closely to ensure the oil pump is functioning properly. If the oil pump fails, avoid attempting DIY repairs; instead, seek professional assistance. Clogged Oil Cooler: A clogged oil cooler leads to insufficient oil pressure, preventing normal heat dissipation and increasing the risk of excessive oil temperature. Solution: Regularly inspect the oil cooler and promptly repair or replace it if issues are detected.
14
4
Share

Why Does the Motorcycle Chain Make a Zizi Sound?

Motorcycle chain noise is caused by insufficient lubrication of the chain or poor alignment between the chain and the sprocket. Insufficient lubrication of the chain: When a motorcycle chain makes noise, the first thing to check is the lubrication level of the chain. Insufficient lubrication is a common cause, and simply adding lubricating oil can solve the problem. Poor alignment between the chain and the sprocket: If there is an issue with the alignment between the chain and the sprocket, replacing the entire set of equipment is the solution. Chain maintenance methods: Clean the chain promptly: After riding in harsh weather conditions, clean the motorcycle chain thoroughly. After cleaning, apply specialized lubricating oil to the chain. Apply chain oil regularly: Spray chain oil every 300 kilometers to allow the motorcycle chain a recovery period. If planning a long-distance ride, carry chain oil to avoid malfunctions caused by insufficient lubrication during the ride, which could pose safety hazards.
7
3
Share

What kind of people drive Audi A4?

Audi A4 is suitable for people aged 20 to 40. The positioning of Audi A4 itself is for fashionable young people. It wouldn't feel strange for an 18-year-old to drive an Audi A4, but since Audi is a luxury car brand, an 18-year-old driving an Audi A4 would easily attract attention. In terms of power: The Audi A4 3.0 comes standard with Audi's patented quattro all-wheel-drive system, which provides double the traction for the vehicle. In terms of configuration: The side head-protection airbags almost cover the entire side from the A-pillar to the rear of the cabin; the new intelligent crash sensor designed for the front airbags can detect the severity of an accident, ensuring the airbags deploy in time. The ESP improves the active safety of the Audi A4 by comprehensively and automatically controlling the driving state, assisting the driver in controlling the vehicle in potentially critical situations caused by improper steering.
12
3
Share

Where is the OBD-II port located on the Chery 3x?

The OBD-II port on the Chery 3x is located beneath the right-side storage compartment. You can easily spot it by looking downward. Automotive Diagnostic Interface: The automotive diagnostic interface consists of 16 pins, each serving a distinct function. Typically, pin 2 is the bus positive, pin 4 is chassis ground, pin 5 is signal ground, pin 7 is the K-line, pin 10 is the bus negative, pin 15 is the L-line, while pin 16 is solely for power supply or detecting battery voltage and current. Diagnostic Card: Also known as a PC-Analyzer or POST (Power-On-Self-Test) card, the diagnostic card operates by displaying error codes generated by the BIOS's internal self-test program. By cross-referencing these codes with the quick-reference code meaning table provided in this manual, you can swiftly identify computer malfunctions. This card proves particularly useful when the PC fails to boot the operating system, experiences a black screen, or when the speaker remains silent.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.