When Does the Engine's Maximum Torque Occur?

1 Answers
KylieMarie
07/29/25 12:36pm
Engine's maximum torque generally appears within the mid-range RPM of the engine. Below is a detailed introduction about engine torque: 1. Importance: Torque is a crucial parameter for measuring engine performance. The greater the torque, the higher the engine's output efficiency, and the faster the crankshaft speed changes. The vehicle's climbing ability, starting speed, and acceleration are better. 2. Proportional relationship: With a fixed power output, torque is inversely proportional to engine speed. The faster the speed, the smaller the torque. It reflects the vehicle's load capacity within a certain range. 3. Corresponding relationship: The engine's torque is related to the engine's tuning, including the intake system, fuel supply system, and ignition system. Additionally, it is related to the engine's displacement and the size of the pistons.
Was this review help?
17
4
Share
More Forum Discussions

Which button on the driver's side locks the doors?

The central locking button on the driver's side can lock the doors, usually located near the door handle. Below are specific introductions to car central control buttons: 1. Electronic Stability Control (ESC): The system is enabled by default. Unless on slippery surfaces like rain or snow, it is generally not recommended to turn it off. 2. Parking Radar/Image: The central control screen displays images, and the radar will emit an alarm sound. 3. Blind Spot Warning System: When there are other vehicles in the blind spots on both sides of the rear, the indicator lights on the rearview mirror will flash to inform the driver not to change lanes. If the driver does not notice the indicator lights and prepares to change lanes, the system will emit a warning sound. 4. Forward Collision Warning System: When the distance between your vehicle and the vehicle in front is too close, the system will emit an alarm sound to alert the driver. If the driver does not take action, the system will automatically brake the vehicle to a stop.
5
2
Share

What is the weight of the Sagitar?

The weight of the Sagitar: the 1.6L manual version is 1300kg, the 180TSI (1.2T) version is 1370kg, and the 280TSI (1.4T) version is 1395kg. The Sagitar brand was introduced to China in 2006. Since entering the market, it has become a benchmark in China's A+ sedan market with its authentic German heritage, superb manufacturing craftsmanship, and leading technological equipment. Here is some related information about the Sagitar: 1. The Volkswagen Sagitar is equipped with an efficient and fast 7-speed DSG dual-clutch automatic transmission, replacing the traditional 4-speed to 6-speed hydraulic torque converter automatic transmission, providing stronger power, lower fuel consumption, and smoother gear shifting. 2. It features an electric sunroof, cruise control, leather seats, leather steering wheel, aluminum alloy wheels, parking assist, a color touchscreen on the center console, automatic air conditioning, rear seat air vents, dual-zone temperature control, and four airbags. It integrates high-tech control configurations, including ABS anti-lock braking, brake force distribution (EBD/CBC, etc.), brake assist (EBA/BAS/BA, etc.), traction control (ASR/TCS/TRC, etc.), electronic stability program (ESP/DSC/VSC, etc.), and auto hold/hill start assist.
2
0
Share

What are the solutions for eighth-generation Accord shaking?

The main solutions for idle shaking in the eighth-generation Accord are as follows: 1. Clean carbon deposits. 2. Check the ignition system. 3. Replace engine components. 4. Test oil pressure. 5. Replace parts if necessary. Causes of car idle shaking: 1. The engine's power comes from the engine piston moving downward, sucking the mixture of gasoline and air into the cylinder, then the upward-moving piston compresses these oil and gas into highly combustible gas, finally ignited by the spark plug, pushing the piston with this powerful explosion force, thus generating engine power. The source of power—the mixture—must enter the combustion chamber through the intake valve. 2. A small portion of gasoline will adhere to the intake valve. Under the engine's high temperature, the unburned hydrocarbons, paraffin, and gum in the gasoline will be burned into carbon deposits. If the fuel injector is dirty, the atomization state of the sprayed gasoline is poor, and the gasoline and air are not mixed evenly, the amount of gasoline condensed on the intake valve will increase. Therefore, this layer of carbon deposits will absorb gasoline, and the absorbed gasoline will be burned into thicker carbon deposits, which in turn will absorb more gasoline. This vicious cycle continues until the intake valve cannot close tightly due to excessive carbon deposits, causing the engine to stop working.
1
0
Share

What are the dimensions of the Outlander?

The Outlander has a body length of 4705mm, a width of 1810mm, a height of 1680mm, and a wheelbase of 2670mm. This model excels in the following aspects: 1. Exterior design. The Outlander's front end appears robust, with an inverted triangular bulge on the engine hood extending down to the top of the bumper, and the front air intake is split into two sections. The slightly protruding lower body design gives it a full and substantial look. 2. Interior design. Due to its higher body compared to sedans, the driver enjoys good visibility, and the seats offer excellent support, reducing fatigue. The steering wheel features a contemporary four-spoke design with adjustable height, though for drivers around 1.7 meters tall, this design may obstruct the view of the turn signal indicators on the dashboard. The circular air vents and T-shaped instrument panel echo the Outlander's "unique" design concept. 3. Performance. The Outlander is equipped with a 2.4-liter Mitsubishi 4G64S4M 16-valve multi-point fuel injection gasoline engine. While the 4G64S4M is not as advanced as the i-VTEC engine found in the CRV, its 2.4-liter displacement is larger than the CRV's 2.0-liter engine. However, its maximum power output of 99KW is lower than that of the CRV and Paladin, though it delivers a maximum torque of 201 Nm.
15
3
Share

What are the reasons why the Peugeot 307 won't start?

Peugeot 307 may not start due to a dead battery or expired battery life, lack of antifreeze, or incorrect gear selection. The specific explanations are as follows: Dead battery or expired battery life: This could be caused by leaving the headlights on for an extended period or the battery reaching the end of its lifespan. It is generally recommended to replace the battery every 2 years. Additionally, installing xenon headlights, high-power audio systems, or DVD players can also lead to vehicle circuit failures. Lack of antifreeze: Adding water or using low-quality antifreeze can cause the entire cooling system to freeze in extremely cold winter conditions. Incorrect gear selection: For automatic transmission vehicles, the gear must be in P (Park) or N (Neutral) when starting. If the gear is in R (Reverse) or D (Drive), the engine will not start. Solutions for a car that won't start: Check if the battery is dead and recharge it; repair the fuel pump if it is damaged; check if there is sufficient fuel and add more if needed; inspect the engine sensors for damage; replace spark plugs and ignition coils; use a heating rod to warm up the engine oil.
15
5
Share

How to Disassemble the Heater Core of an Old Jetta?

The method for disassembling the heater core of an old Jetta mainly involves the following steps: 1. Drain the coolant from the cooling system. Remove the control panel. Separate the cable fixture on the left side of the heater assembly and remove the screws on the terminal posts. Disconnect the wiring connector behind the blower motor. 2. Disconnect the vacuum tube and the lighting wire behind the heater control unit. Place a container under the heater assembly's water supply pipe at the back of the cylinder head, beneath the engine. Disconnect the heater assembly's water supply pipe at the back of the cylinder head. Disconnect the heater assembly's return hose on the thermostat housing, insert the foot pump hose into the heater assembly's return pipe, push the coolant from the water supply pipe into the container, and blow out any remaining coolant from the heater assembly. Remove the two connecting bolts, then separate the return pipe. 3. Pull out the right air pipe below the return pipe on the heater assembly. Remove the two bolts on the other side and separate the water supply pipe from the flange joint. Pull out the air pipe below the water supply pipe on the left side of the heater assembly. Remove the water supply pipe's fixing bracket on the left side of the firewall. Loosen the mounting bracket nut under the water supply pipe bracket. 4. Loosen the right mounting bracket nut under the return pipe. Remove the two mounting nuts at the top of the heater assembly. Disconnect the control wire for the blower motor switch. Disconnect the control wire on the main damper flap on the side of the heater assembly. Separate the heater assembly from the mounting studs, then lift it upwards and remove it from the vehicle. 5. Reassemble in the reverse order of disassembly.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.