When Disconnecting a Car Battery, Should You Remove the Positive or Negative Terminal First?

1 Answers
JulianDella
07/29/25 8:43pm
When disconnecting the battery cables, it is essential to remove the negative terminal first before the positive one. The negative terminal of a car battery is connected to the vehicle's body, which is entirely made of metal. The moment you disconnect the negative terminal, the car's electrical circuit experiences a "short circuit," potentially damaging the battery and wiring. Below are the key points: 1. The negative terminal is connected to the car's body, and since the body is metal, the entire vehicle essentially leads back to the negative terminal. 2. Disconnecting the negative terminal instantly creates a direct connection between the positive and negative terminals, resulting in a "short circuit." This can cause significant damage to the battery and wiring.
Was this review help?
10
5
Share
More Forum Discussions

What Are the Causes of Squeaking Noises from a Car Chassis?

The causes of squeaking noises from a car chassis are: 1. Corrosion or aging of the stabilizer bar bushings; 2. Damaged brake pads; 3. Malfunction in the connecting parts between the suspension and shock absorbers; 4. Noise from the wheel bearings; 5. Deformation of the shock absorber springs; 6. Aging or wear of the shock absorber pressure bearings. The engine chassis primarily serves a load-bearing function, with the car engine and all its components and assemblies mounted on it. The car chassis consists of the transmission system, running system, steering system, and braking system, ensuring the normal operation of the vehicle. The thickness of its plastic sealing material can reach 1.5 to 2.5 millimeters, providing protection when the underside is scraped by road protrusions.
10
0
Share

What to Do When the Paint on a New Car Gets Scratched Off?

Solutions for scratched-off paint on a new car: 1. If the scratched area is not deformed and the area of paint loss is small, you can purchase a touch-up pen matching the car's color and apply it; 2. If a large area of paint is scratched off, with significant damage in size and length, and obvious deformation, it is necessary to go to a repair shop for sheet metal shaping and paint repair. Car paint is a protective film sprayed onto the car, which is a type of coating that makes the car body less susceptible to corrosion. Car paint maintenance methods: 1. Remove dust from the car body promptly to minimize static electricity's attraction of dust; 2. Rinse off rain stains with clean water after rain; 3. When wiping, follow the direction of water flow from top to bottom.
13
5
Share

What color is the license plate of the Odyssey Hybrid?

Odyssey Hybrid has a blue license plate, as it is a hybrid electric vehicle. The Odyssey is a hybrid electric MPV under GAC Honda, with body dimensions of 4847mm in length, 1820mm in width, and 1702mm in height, and a wheelbase of 2900mm. The Odyssey is equipped with a 2.0L naturally aspirated engine, with an L-type cylinder arrangement, a maximum power of 107 kilowatts, and is paired with an electronic continuously variable transmission. Its suspension system features a MacPherson strut front suspension and a torsion beam rear suspension, with front-wheel drive and electric power steering.
6
4
Share

How to Test a Camshaft Position Sensor?

Testing methods for a camshaft position sensor: 1. Use a multimeter to check the resistance between terminal 1 of the sensor and terminal 62 of the ECU, terminal 2 of the sensor and terminal 76 of the ECU, and terminal 3 of the sensor and terminal 67 of the ECU; 2. When the engine is running, use an oscilloscope to measure the signal waveform between the signal output terminal and the ground terminal of the magnetic camshaft position sensor; 3. Turn off the ignition switch, unplug the sensor wire connector, connect the positive and negative probes of the multimeter to terminals 1 and 3 respectively, and test when the ignition switch is turned on.
18
0
Share

How to Apply Car Window Tint Film?

Methods for applying car window tint film: 1. Clean the car window and cut the tint film to the appropriate size; 2. Spray an appropriate amount of water on the window and smoothly lay the tint film in place; 3. Use a squeegee to remove bubbles and excess water; 4. Inspect and wipe clean. Car window tint film refers to a film applied to the surface of car glass, which provides functions such as heat insulation, light blocking, explosion-proof, one-way visibility, and glare reduction. Acceptance criteria for car window tint film: 1. The film must be installed as a whole piece without piecing together; 2. There should be no bubbles or creases; 3. When sitting in the driver's seat, the view outside through the front windshield should not appear blurry or have color distortion; 4. The edges of the film must be fully adhered without any lifting.
6
5
Share

What are the consequences of continuously using service brakes when driving down a long slope?

Continuously using service brakes when driving down a long slope can cause the brake temperature to rise, leading to a sharp decline in braking effectiveness. When descending a long slope, it is advisable to use a lower gear and employ engine braking. Service braking refers to stepping on the brake pedal, while engine braking involves lifting the accelerator pedal without disengaging the engine. Precautions for driving down a long slope: 1. Reduce speed in advance to ensure the vehicle speed remains within a controllable range for the driver; 2. Maintain a safe following distance to allow time for emergency handling in case of sudden situations; 3. While paying attention to vehicles ahead, also observe the situation behind. If encountering prolonged honking or flashing lights from behind, yield as soon as possible.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.