When did the Beijing China VI emission standards come into effect?

3 Answers
EmilianoMarie
07/28/25 3:33pm
Beijing's China VI emission standards were implemented starting from January 1, 2020. The nitrogen oxide emission standard is 0.16 grams per kilometer, the particulate matter concentration emission standard is 0.022 grams per kilometer, and the non-methane hydrocarbon emission standard is 0.18 grams per kilometer. China VI refers to strictly controlling pollutant emission limits. Under conditions excluding working conditions and test influences, the carbon monoxide emissions of gasoline vehicles are reduced by 50%, the total hydrocarbon and non-methane total hydrocarbon emission limits are reduced by 50%, and the nitrogen oxide emission limits are tightened by 42%.
Was this review help?
8
0
Share
OVivienne
08/11/25 7:55pm
I remember at the beginning of 2020, Beijing started implementing the China 6 emission standard, with the China 6b version officially enforced on January 1, 2020. This standard was introduced to control vehicle exhaust pollution and improve air quality, especially since Beijing had severe smog issues before then. The new regulation required many new cars to meet the standard before they could be driven on the road. At that time, I had just graduated and was buying a car, so I specifically went to a 4S dealership to confirm the standard. The salesperson said that China 6b-compliant cars would be more environmentally friendly but slightly more expensive. After switching to a compliant car, I clearly noticed the air becoming cleaner while driving. I recommend everyone pay attention to local traffic restriction policies and check the China 6 compliance status when buying used cars to avoid unnecessary trouble. Overall, this policy promoted green transportation, and looking back now, it feels quite meaningful.
Was this review help?
5
5
Share
Expand All
Barry
09/29/25 5:33am
As someone who has been driving for ten years, I clearly remember the changes in Beijing's emission standards. The China 6b standard was implemented on New Year's Day in 2020. In the previous China 5 era, vehicle emissions were much higher, but the new regulations significantly reduced pollutant emissions. After implementation, vehicles that didn't meet the standard were restricted from entering within the Fifth Ring Road, affecting travel convenience. I have a friend who overlooked the standard and ended up spending extra money to replace their car. Daily advice for car owners is to regularly check the exhaust system and choose compliant models for better safety and environmental protection. This change has indeed improved urban air quality, but initially caused some used car prices to drop, so it's important to weigh the pros and cons and make informed choices.
Was this review help?
6
0
Share
Expand All
More Forum Discussions

Where and What is the Registration Process for Electric Motorcycles?

Resident ID card or household registration booklet of the vehicle owner; purchase invoice of the vehicle; vehicle factory certificate. The owner or agent collects the "Electric Bicycle Registration/Transfer/Cancellation Application Form", and the owner or agent fills in the detailed information as required. Original proof of origin and original certificate of the electric bicycle, input registration information, and prepare to print the acceptance receipt. Determine the license plate number when printing the acceptance receipt.
1
2
Share

How to Use Ford's Cruise Control System?

Start the vehicle's cruise control by sliding switch A to the ON position to activate the speed control system. First, accelerate the car to the desired speed, press and release the SET+ button, then release the accelerator pedal. Press the accelerator or brake pedal until the desired speed is reached. Hold SET+ or SET- to adjust the set speed in increments of approximately 1 km/h. To completely turn off the cruise control system, slide the switch to the OFF position, or turn off the ignition when the car is stationary, and the system will be fully deactivated.
1
3
Share

What does a two-way lane mean?

Two-way lane refers to a road with two-way traffic, totaling two motor vehicle lanes left and right. Special two-lane roads: In China, secondary and tertiary highways are basically two-lane roads. For secondary highways in plain and hilly areas, when the mixed traffic volume is large and it is difficult to separate the slow lane, fast and slow lanes can be marked, but they still belong to two-lane roads. Lane setting: Fourth-class highways should be designed as two-lane roads, and single-lane sections can be used for areas with low traffic volume. For highways designed at 120km/h, depending on traffic capacity requirements, they can be set as one-way two-lane, three-lane, or four-lane roads, i.e., two-way four-lane, six-lane, or eight-lane roads. For highways and first-class roads designed at 100km/h, when the traffic volume exceeds the capacity of four lanes, the number of lanes can be increased in even numbers.
19
3
Share

Can Adding 98 Octane Gasoline Compensate for Using Poor Quality Gasoline?

Adding 98 octane gasoline cannot compensate for using poor quality gasoline; instead, you can refuel with 97 octane gasoline. Here are the specific details: Excessive Use of Poor Quality Gasoline: If a significant amount of poor quality gasoline has been added, it is necessary to completely remove the remaining gasoline from the fuel tank and refill with higher quality gasoline. Additionally, the fuel injectors and combustion chamber need to be cleaned, and the fuel filter and fuel pump should be replaced to prevent clogging from excessive impurities. Hazards of Using Poor Quality Gasoline: Using low-quality gasoline can leave severe deposits in the cylinders. Over time, this leads to significant carbon buildup, which is very difficult to remove and can severely damage the engine.
2
4
Share

What are the two wires on a car horn connected to?

One end of the car horn is connected to the positive terminal of the power source, while the other end is connected to the negative terminal through a relay. The horn button controls the relay, thereby indirectly controlling the connection and disconnection between the horn and the battery's negative terminal. Horn wire connection method: The horn has only two wires. When connecting, the red wire should correspond to the red port, and the black wire should correspond to the black port. Separate the two wires of the horn and strip about 2 cm of insulation. Use scissors to trim the wire ends neatly, fold them in half, then insert the red wire into the red socket and the black wire into the black socket using the same method. For nut-direct compression type connections, form the wire ends into a circular shape and wrap them around the screw between the bolt and nut, then tighten the nut to secure. Always ensure the red wire connects to the red port and the black wire to the black port during connection.
19
3
Share

What to Do When the Ford EcoSport Steering Wheel Locks?

Use your hand to slightly steady the steering wheel, check whether the gear in the car is in neutral, and whether the handbrake is pulled to avoid accidental harm to subsequent operations. Insert the key to unlock, turn the steering wheel left and right. If it can turn, it means it has returned to normal. If the key cannot turn, you need to turn both the steering wheel and the key simultaneously. Turn the steering wheel counterclockwise while twisting the key, moving little by little until the key can ignite the engine. Hold the steering wheel with your left hand and gently shake it, while simultaneously shaking and twisting the key with your right hand to unlock.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.