When can I drive on the highway after getting my driver's license?

2 Answers
LeEloise
07/28/25 10:17pm
You can drive alone on the highway one year after obtaining your driver's license. If a driver operates a motor vehicle on the highway during the probationary period, they must be accompanied by a driver who has held a driver's license for the same or a higher vehicle category for more than three years. The accompanying driver should sit in the front passenger seat to provide guidance to the probationary driver. Highway driving precautions: 1. Always perform a safety check before driving on the highway. Before entering the highway, inspect the car's braking system and tire wear to avoid emergency braking failure or tire blowouts due to tire pressure issues. 2. How to drive on ramps and lanes. Overtaking, making U-turns, stopping, and reversing are not allowed on highway ramps. After entering the lane from the ramp, strictly adhere to the highway speed limits. Do not exceed the speed limit or drive below the minimum speed, and maintain a safe distance from the vehicle ahead.
Was this review help?
12
4
Share
GrantLee
08/12/25 2:48am
When I first got my driver's license, I was really eager to drive on the highway by myself, but I couldn't! There's a full 12-month probationary period. During this time, you must have an experienced driver with you on the highway—someone who's had their license for over three years and holds the same class of license. My friend got caught by the traffic police for sneaking onto the highway before his probationary period ended, and the fine and penalty points were definitely not worth it. The speeds on the highway are so high—if something goes wrong, it's no joke. After the 12-month probationary period, there will be a note on the supplementary page of your license, and then you can drive on the highway alone. However, I still recommend that beginners make a few trips with an experienced driver first to get used to the rhythm of highway driving—suddenly driving alone can be nerve-wracking.
Was this review help?
1
4
Share
Expand All
More Forum Discussions

What is the battery replacement tutorial for the Mercedes-Benz CLS300 key?

Mercedes-Benz CLS300 key battery replacement tutorial is: Remove the mechanical key, insert the mechanical key into the slot at the paddle position, apply slight force, the back cover will pop up, then remove the depleted old battery and replace it with a new one. Taking the 2021 Mercedes-Benz CLS300 as an example, it is a mid-to-large-sized car with body dimensions of: length 4988mm, width 1890mm, height 1424mm, and a wheelbase of 2939mm. The 2021 Mercedes-Benz CLS300 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 184PS, maximum torque of 280Nm, and maximum power of 135kW, paired with a 9-speed automatic transmission.
4
2
Share

How to Open the Trunk Lid of the Sagitar?

To open the trunk lid of the Sagitar: 1. Gently lift the trunk button; 2. Use the key to unlock it directly. Taking the 2021 Sagitar as an example, it is a compact car with body dimensions of length 4753mm, width 1800mm, height 1462mm, a wheelbase of 2731mm, a minimum ground clearance of 108mm, and a body weight of 1355kg. The 2021 Sagitar features a front suspension of McPherson independent suspension and a rear suspension of multi-link independent suspension. It is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 116PS, a maximum torque of 175Nm, and a maximum power of 85kW, paired with a 5-speed manual transmission.
1
2
Share

What are the differences between Euro 5 and China 6 vehicle standards?

The differences between Euro 5 and China 6 vehicle standards are: 1. Different carbon monoxide emission standards: Euro 5 requires carbon monoxide emissions below 1.0g per kilometer; China 6 requires carbon monoxide emissions below 0.7g per kilometer. 2. Different maximum particulate emission standards: Euro 5 allows maximum particulate emissions of 0.005g per kilometer; China 6 allows maximum particulate emissions of 0.003g per kilometer. The Euro 5 standard was officially implemented in Europe in 2009 as the fifth-generation emission standard. China 6 refers to the National Sixth Stage Motor Vehicle Pollutant Emission Standard, which is an upgraded version of China 5. Compared to China 5, the emission standards for pollutants are nearly 50% stricter, with the same requirements applying to diesel vehicles.
1
0
Share

What are the maintenance methods for car batteries?

Car battery maintenance methods include: 1. Start the car regularly to charge the battery; 2. When the electrolyte is low, replenish with distilled water or a dedicated replenishment fluid; 3. During daily driving, frequently check if the small holes on the battery cover are ventilated; 4. Inspect the positive and negative terminals for signs of oxidation; 5. Check all parts of the circuit for aging or short circuits; 6. Turn off electrical devices when leaving the car. The functions of a car battery are: 1. When starting the engine, the battery supplies power to the starting system, ignition system, and electronic fuel injection system; 2. When the engine is stopped or at low idle, it powers the car's electrical devices; 3. When the generator's output is insufficient, it can assist in powering electrical devices; 4. It mitigates voltage surges in the electrical system, protecting the car's electronic equipment; 5. It can store excess electricity generated by the alternator.
7
5
Share

What are the reasons for slightly high car idle speed?

The reasons for slightly high car idle speed are: 1. The idle switch does not close; 2. The idle control valve is faulty; 3. There is air leakage in the intake pipe; 4. Incorrect valve timing; 5. Fuel injector dripping or clogging; 6. Exhaust system blockage; 7. The EGR valve opens during idle conditions. Solutions for slightly high car idle speed: 1. Adjust or replace the throttle position sensor; 2. Clean or replace the idle control valve and use a decoder to perform basic idle speed settings; 3. Locate the leakage point, reseal or replace related components; 4. Check the timing marks and readjust the valve timing according to standards; 5. Clean and check the fuel injection quantity of each injector to ensure there is no clogging or dripping; 6. Replace the three-way catalytic converter; 7. Remove carbon deposits on the EGR valve or replace the EGR valve.
2
5
Share

What engine is used in the Mercedes-Benz SLS AMG?

The Mercedes-Benz SLS AMG is equipped with a 6.2L V8 naturally aspirated engine, delivering a maximum horsepower of 631 PS, a maximum torque of 635 Nm, and a maximum power output of 464 kW. Taking the 2014 Mercedes-Benz SLS AMG as an example, it is a sports car with body dimensions of: length 4638mm, width 1939mm, height 1262mm, a wheelbase of 2680mm, a fuel tank capacity of 99L, and a curb weight of 1550kg. The 2014 Mercedes-Benz SLS AMG features double-wishbone independent suspension both at the front and rear, a front-engine rear-wheel-drive layout, and a 7-speed dual-clutch transmission.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.