When Can a New Car Go on the Highway?

1 Answers
NadiaDella
07/29/25 4:47pm
New cars can go on the highway directly. When driving on the highway, you need to carry your ID card, vehicle license, and driver's license. Pre-drive checks: Focus on fuel, engine oil, tire pressure, lights, etc., and plan your route in advance. It is recommended to have a driver with at least 3 years of driving experience accompany you. Speed limits: The minimum speed on the highway should not be less than 60 km/h, and the maximum speed should not exceed 120 km/h. Maintain distance: Control your speed and try to keep a safe distance from the vehicle in front. Proper lane changing: Do not cross multiple lanes at once. Before changing lanes, observe the traffic carefully, use turn signals, and honk to alert other vehicles.
Was this review help?
3
4
Share
More Forum Discussions

What is the fuel consumption of the Geely Panda?

Geely Panda's official fuel consumption is 5.1 liters per 100 kilometers. Clean engine carbon deposits: It is recommended to add a certain amount of cleaning agent when refueling. After cleaning, it is best to drive on the highway for a while, which helps increase exhaust volume and allows stronger airflow to remove larger carbon deposit particles. Check the oxygen sensor: As an internal control unit of the car, the oxygen sensor mainly monitors the fuel-air ratio of the engine. Once damaged, it will cause an imbalance in the fuel-air ratio, leading to a sudden increase in fuel consumption. After the oxygen sensor is damaged, the exhaust pipe will emit darker-colored exhaust gas during driving, and the oxygen sensor should be replaced at this time. Regularly replace the three filters: During vehicle use, the oil filter, air filter, and fuel filter must be replaced regularly. If not replaced for a long time, they will become dirty and affect performance, sending incorrect information to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits.
10
4
Share

How to set the mirror folding function after locking the Audi A6L?

Rotate the mirror adjustment knob of the A6L to the folding position, and both exterior mirrors will be folded. The mirror heating function of the Audi A6 can assist the driver in observing the road conditions at the rear of the vehicle while driving. If the mirrors become blurred or unclear, it may affect driving safety. The mirror heating feature is particularly useful on rainy days, as it heats the electric mirrors (the reflective mirrors on both sides of the windows). If the exterior mirrors are accidentally bumped or manually moved out of position, they can be restored by performing an electric folding and extending operation. First, press the vehicle's one-touch start button to start the engine. Then, press the instrument menu button on the left side of the multifunction steering wheel. Next, press the VIEW button on the left side of the steering wheel to switch the vehicle's instrument display. Then, select the "Fold Mirrors" option on the central control LCD screen to enable automatic mirror folding when locking the vehicle. Finally, press the confirmation button on the left side of the steering wheel to complete the setup.
13
0
Share

Where is the Lynk & Co 03 engine produced?

Lynk & Co engines are domestically produced. The 1.5T model's engine, with model numbers JLH-3G15TD and JLH-3G15TDC, comes from Geely's engine division, while the 2.0T model's engine is sourced from Volvo. Additional information about Lynk & Co is as follows: 1. In terms of the rear design, the Lynk & Co 03 features 'L'-shaped taillights and dual round exhaust pipes similar to the concept car, giving it high recognition. 2. For powertrain, the Lynk & Co 03 is equipped with a 1.5T direct-injection engine paired with a 7-speed dual-clutch transmission. It delivers a maximum power of 132kW (179 horsepower) and a peak torque of 265N·m, mated to a 7-speed dual-clutch transmission. 3. In terms of exterior design, the production version of the Lynk & Co 03 adopts split-type headlights and a horizontal grille. The car's body design continues the concept car's styling, particularly the slightly fastback C-pillar design.
4
4
Share

What is the ground clearance of the Volkswagen CC?

The ground clearance of the Volkswagen CC is 180mm when unloaded, with a minimum ground clearance of 120mm. Additional extended information is as follows: Suspension: The Volkswagen CC's chassis structure still features a front MacPherson strut independent suspension and a rear multi-link independent suspension, consistent with the Tiguan L, with overall tuning leaning towards comfort. The suspension has a long travel and good flexibility, providing a relatively crisp rebound when passing over bumpy roads and maintaining good stability when facing larger undulating surfaces. Effective suppression of roll: During high-speed cornering, the suspension support is also adequate, effectively suppressing roll. The lower control arm of the Volkswagen CC's MacPherson front suspension uses a steel plate stamping process, which reduces manufacturing costs while ensuring load-bearing performance. The front suspension bearing seat is made of aluminum alloy: Compared to cast iron, it performs better in terms of weight reduction, lowering the unsprung mass of the front suspension and improving response performance. The Kodiaq's front suspension structure and manufacturing process are consistent with the Tiguan L of the same size and platform, with a high degree of commonality between the front suspension components of the two models.
1
0
Share

What are the model specifications of gear oil?

Gear oil model specifications: 1. GL-1: GL-1 grade gear oil is specified for automotive spiral bevel gears, worm-type drive axles, and various manual transmissions operating under low tooth surface pressure and low sliding speed conditions. 2. GL-2: For automotive worm-type drive axles where GL-1 gear oil cannot meet requirements due to load, temperature, and sliding speed conditions, GL-2 grade gear oil is specified. 3. GL-3: GL-3 grade oil is specified for automotive manual transmissions and spiral bevel gear drive axles with relatively harsh sliding speeds and loads. 4. GL-4: GL-4 grade gear oil is specified for various gears operating under low-speed high-torque and high-speed low-torque conditions, especially hypoid gears used in buses and other vehicles. 5. GL-5: GL-5 grade gear oil is specified for various gears operating under high-speed shock loads, high-speed low-torque, and low-speed conditions, particularly hypoid gears used in buses and other vehicles. 6. GL-6: GL-6 grade gear oil is specified for various gears in cars and other vehicles operating under high-speed shock conditions, especially hypoid gears with large offset distances (greater than 50nm or close to 25% of the large gear diameter).
11
2
Share

What Causes the Steering Wheel of Skoda Rapid to Stick?

Skoda Rapid steering wheel sticking may be caused by insufficient power steering fluid, loose power steering pump belt, overly tight steering column screws, or severe damage to the steering gear. Detailed reasons and solutions for Skoda Rapid steering wheel sticking are as follows: 1. For steering wheel sticking, first check if the power steering fluid is insufficient and if the power steering pump belt is loose. Then determine whether the issue lies with the steering gear or the steering wheel itself. If it's the steering wheel, inspect the universal joint beneath it. The steering column screws might be too tight—loosening them could help. Severe damage to the steering gear may require replacement instead of repair. Check for power steering fluid leaks, usually indicated by black oil streaks, and address them promptly by repairing and refilling. 2. If the steering column is sticking, lubrication may be needed, or the floor mat might be obstructing it. To diagnose, disconnect the steering gear and manually rotate the universal joint; if it sticks, replacement is necessary. 3. Steering wheel sticking can range from minor to serious, increasing the risk of accidents in emergencies. It's crucial to take any warning signs from your vehicle seriously, identify and resolve issues promptly to prevent accidents. If you're unable to accurately diagnose the problem, it's advisable to contact your local 4S dealership for inspection and repair.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.