···
Log in / Register

What wattage motor is suitable for the Yuanqu 240?

4 Answers
SanManuel
07/29/25 10:24pm

Yuanqu 240 is suitable for 800W-1500W motors, subject to actual conditions. Methods to determine motor suitability: Based on official controller data, motors within the compatible range can be identified. Legal replacement and maintenance should be performed at official designated service centers. Follow the controller's user manual for motor compatibility and have the motor safely installed at professional service centers. Factors affecting power consumption: The quality of the controller affects the motor's wattage. Improper usage methods may degrade controller quality, impacting the motor's operational power. Actual usage scenarios directly influence the controller's ability to maximize control over the motor.

Was this review help?
3
0
Share
Cathy
08/15/25 11:04pm

I've been playing with electric vehicles for a while, and the Fardriver 240 controller paired with a 1000W motor is the perfect match, especially for daily commuting. The moderate power ensures smooth acceleration and strong hill-climbing capability without draining too much power. I've tried pairing it with a 2000W motor, but the battery drains too quickly and can't keep up, plus the controller tends to overheat and burn out. A 1000W motor is more than enough for city riding, providing a range of about 50 kilometers, especially when paired with a 72V20Ah battery. While higher power might be more thrilling, it also increases the risk of accidents, especially on slippery roads during rainy days. For maintenance, I recommend regularly checking the motor fan to prevent clogging, which helps extend its lifespan. Overall, it's a balanced and safe setup.

Was this review help?
8
3
Share
Expand All
SanMarley
10/18/25 2:41am

From my years of experience, the Yuanqu 240 controller works best with motors between 800W and 1200W. Lower power like 800W is stable and energy-efficient, sufficient for commuting while saving money. Too high power carries risks like speed loss of control. The Yuanqu 240 supports a wide range, but don't exceed 1500W to avoid overloading the controller. Choose a battery capacity of at least 20Ah; for hilly areas, opt for 1200W to handle slopes more easily. Remember that local regulations may impose limits, such as exceeding 1000W in urban areas possibly being illegal. Safety first—don't chase high speed at the expense of battery and motor compatibility. Regular maintenance of circuits to prevent short circuits will make your vehicle durable and hassle-free.

Was this review help?
14
5
Share
Expand All
LucyLee
12/01/25 3:20am

For electric vehicle configurations, pairing a Far-Drive 240 controller with a 1200W motor is quite suitable. From a technical perspective, the power matches well when the controller current is around 24A, and the 1200W setup offers high efficiency with good heat dissipation. Opting for a well-known brand motor ensures longer lifespan and provides quick response for hill climbing or acceleration, but avoid exceeding 1500W to prevent damage from excessive starting current. Using a 72V battery system enhances range. Higher power setups, such as 2000W, consume electricity quickly and pose higher risks of temperature rise. Considering practical usage, 1200W is flexible enough for commuting or leisure purposes, and its simplicity makes maintenance easier.

Was this review help?
3
0
Share
Expand All
More Forum Discussions

Is ETC limited to one card per vehicle?

ETC is one card per vehicle, and one card can be bound to multiple vehicles. According to the "Rules for the Use of Non-Stop Rapid Passage Systems," when applying for an ETC card, you need to fill out the "ETC Service Deduction Authorization Form." When specifying the vehicles for payment binding, multiple vehicles can be listed. In other words, there is no limit to the number of vehicles that can be bound to a single ETC card for payment purposes. ETC is an electronic toll collection system, also known as an automatic road toll system. It is a road toll method specifically designed for toll roads, commonly found on highways, bridges or tunnels with toll policies, and certain sections of urban centers to alleviate traffic congestion. ETC Deduction Principles: Highways have one or more ETC lanes. Through dedicated short-range microwave communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, the system uses computer networking technology to perform backend settlement with banks. This allows vehicles to pay tolls without stopping at toll stations, all based on the principle of "pass first, deduct later." Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Low-carbon, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduced wear and tear: Saves costs by decreasing the frequency of vehicle starts and brakes, thereby reducing wear and fuel consumption; Improved efficiency: Theoretically, ETC lanes can increase vehicle passage efficiency by 2-3 times, making traditional ETC more updated, faster, and higher-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, intercity transportation smart cards will be basically realized in key city clusters, and the proportion of vehicles equipped with ETC will significantly increase." It also set a target in the "13th Five-Year" comprehensive transportation development indicators: "By 2020, the ETC usage rate for road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the ETC adoption rate for passenger vehicles, future efforts will include promoting ETC use for trucks and exploring deeper integration of the ETC system with smart transportation directions such as vehicle-to-vehicle communication and vehicle-road coordination. This will provide comprehensive travel services for vehicle owners, meaning more application scenarios will support ETC usage.
16
1
Share

Which has priority, right turn or going straight?

Going straight has priority. According to Article 51 of the Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China, at intersections with designated lanes, vehicles must enter the appropriate lane based on their intended direction of travel. When making a right turn, if the vehicle ahead in the same lane is waiting for the traffic signal, the following vehicle must stop and wait in turn. Relevant information about traffic lights is as follows: Introduction: Traffic lights are signals that direct traffic flow, typically consisting of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to proceed, and a yellow light serves as a warning. Control methods: The most basic control method is fixed-time control at a single intersection. Line control and area control can also use fixed-time control methods, also known as static line control systems and static area control systems.
12
1
Share

Can motorcycles be driven on the road in Wuhan?

Motorcycles cannot be driven on the road in Wuhan. Here are the relevant details: Motorcycle ban policy: Wuhan has banned motorcycles since 2004. According to regulations, motorcycles are not allowed to operate in urban areas, but they can be driven freely in suburban areas. Motorcycles purchased in Wuhan cannot be licensed. However, motorcycles bought in suburban areas can be registered with suburban licenses. Driver's license required: Motorcycles are classified as motor vehicles in China, and a driver's license is required to operate them. The standard C-class car license is not applicable for motorcycles. Riding a motorcycle without a license is considered unlicensed driving. Currently, there are three main types of motorcycle licenses: Class F (for light motorcycles), Class E (for regular two-wheel motorcycles and light motorcycles), and Class D (for regular three-wheel motorcycles, regular two-wheel motorcycles, and light motorcycles).
18
5
Share

What are the requirements for opening a charging station?

Opening a charging station requires two basic conditions: a fixed parking space and a power supply. The following is an introduction to charging stations: Procedures for opening a charging station: First, submit a letter of intent to the local government's development and reform commission planning department and wait for approval. Then, apply for the geographical location from the Land and Resources Bureau, and simultaneously submit a feasibility report to the Urban Planning Bureau of the Construction Committee, also waiting for approval. Once these departments agree to the plan and provide approval, the next steps involve the Industrial and Commercial Bureau, Taxation Bureau, Quality Inspection Bureau, Environmental Protection Bureau, Fire Department, and, most crucially, the Power Bureau. Once all these approvals are obtained, after the construction of the electric vehicle charging station is completed, an acceptance application can be submitted to the power supply company. Upon passing the acceptance inspection, the power supply company will complete the installation of meters and power connection, after which the station can naturally begin operations. Functions of a charging station: The charging pile (socket) can achieve timed charging, electricity metering, and amount calculation, serving as a terminal for citizens to purchase electricity. At the same time, to improve the efficiency and practicality of public charging piles (sockets), functions such as multi-charging from a single pile (socket) and charging for electric bicycles will be gradually added in the future.
9
0
Share

What is Fatigue Driving Warning?

Fatigue driving warning is a driver fatigue monitoring and early warning product based on the physiological response characteristics of the driver. Below is a detailed introduction to the relevant content: Warning System: The commonly equipped fatigue monitoring system is called the "Fatigue Driving Warning System". It is based on the driver's physiological image response and consists of two main modules, the ECU and a camera. The system uses the driver's facial features, eye signals, head movements, etc., to infer the driver's fatigue state and provides alarm warnings and takes corresponding measures. It offers active and intelligent safety protection for drivers and passengers. Safety Warning System: Additionally, some fatigue monitoring systems are referred to as "Driver Safety Warning Systems". This system is activated when the vehicle enters environments that are prone to making the driver relaxed, such as straight and flat roads, or situations that may cause the driver to become distracted or doze off. It also activates when the vehicle speed exceeds 65 km/h. The Driver Safety Warning System consists of a camera, several sensors, and a control unit. The camera is installed between the windshield and the rearview mirror inside the car and continuously measures the distance between the car and the lane markings. It monitors the vehicle's driving route through signals from the digital camera and data from the steering wheel movements.
6
2
Share

What is the function of paddle shifters?

The function of paddle shifters is: without the need to step on the clutch pedal, the driver can complete gear shifting operations without taking their hands off the steering wheel. Their characteristics are: convenient operation, high efficiency, and improved driver control. Paddle shifters are located on the left and right sides of the steering wheel arc. The operating steps are: 1. Press the car's brake pedal all the way down; 2. Start the car and let it idle; 3. Move the automatic gear lever to D mode, S mode, or manual mode; 4. Lift with the index and middle fingers towards the driver to upshift, and press down with the thumb towards the steering wheel to downshift. The types of paddle shifters are divided into: 1. Fixed type: During steering, the steering wheel rotates while the paddle shifters remain stationary; 2. Follow-up type: During steering, the paddle shifters rotate simultaneously with the steering wheel as a whole.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.