···
Log in / Register

What wattage is more suitable for a car charger?

1 Answers
CarlosFitz
09/01/25 4:05am
It is recommended to choose a 9V-2A (18W) car charger. Higher-power car chargers are more likely to cause damage or burn out electronic devices or electrical appliances attached to car accessories due to the output of alternating current. Installation method of car charger: Car chargers are divided into direct charging and dock charging. When charging a device through the car cigarette lighter socket, simply remove the cigarette lighter with the cigarette symbol, connect the device to be charged to the car charger with a charging cable, and insert it into the car cigarette lighter socket. Precautions for using a car charger include: Do not charge when the vehicle is turned off; Do not connect for charging when the vehicle is starting; Try to minimize charging multiple devices simultaneously or avoid charging high-power devices; Unplug the charger promptly after charging, as prolonged connection can damage electronic products.
Was this review help?
20
5
Share
More Forum Discussions

How early can the vehicle annual inspection sticker be obtained?

Vehicle annual inspection stickers can be obtained 3 months in advance. Below is relevant information about vehicle annual inspections: Introduction to vehicle annual inspection: The timing of vehicle annual inspections is not calculated based on specific dates, but rather by month. If a vehicle's annual inspection is due on September 10th, the inspection can be conducted in advance during July, August, or September. Important notes: Vehicles that fail to undergo annual inspection on time and continue to be driven will be subject to fines and 3 penalty points, and the vehicle may be impounded. If the annual inspection is overdue, previously purchased vehicle insurance will not be valid. In case of any traffic accidents during this period, the insurance company will not provide compensation.
13
3
Share

How to Reset the Tire Pressure Monitoring Light on the Outlander?

The method to reset the Outlander's tire pressure light is as follows: When the warning light comes on, locate the tire pressure reset button below the left side of the steering wheel. Press and hold it for a few seconds until the tire pressure warning light turns off, indicating a successful reset. If manual reset fails, professional technicians should be consulted to clear the fault code. The steps to reset the Outlander's tire pressure warning light are detailed below: 1. Drive slowly to a safe location and park. Turn off the engine, wait for 1-2 minutes, and then restart the vehicle. After the vehicle stabilizes, check the tire pressure values displayed on the dashboard. 2. Both underinflation and overinflation can trigger the tire pressure light. Drive slowly to a car repair shop or auto beauty shop to adjust the tire pressure. If you have a personal inflation device, you can adjust the tire pressure on the spot. 3. While inflating or deflating the tires, observe the tire pressure light on the dashboard. Stop inflating once the light turns off. If overinflated, release the excess air. 4. If the tire pressure light remains on after adjustment, a manual reset may be required. Locate the settings button on the vehicle's central console, typically labeled 'SET,' to reset the tire pressure. 5. If the vehicle does not support manual operation, ensure the tire pressure is normal and have a technician use a specialized diagnostic tool to clear the fault code.
14
0
Share

Is Power Steering Fluid the Same as Transmission Fluid?

Power steering fluid and transmission fluid are not the same. Transmission fluid can be used as power steering fluid in cars, but power steering fluid cannot be used as transmission fluid. The main component of transmission fluid is lubricating oil, and the additives used in transmission fluid and power steering fluid are different. Transmission fluid and power steering fluid are absolutely not interchangeable. The main function of transmission fluid is to keep the gear system clean, lubricate the car's transmission device, and extend its service life. Power steering fluid is mainly used to increase driving comfort, automatically providing steering force when the driver is operating the vehicle, making the driving process easier and reducing steering fatigue for the driver.
5
1
Share

What are the symptoms of a broken transmission mount pad?

Transmission mount pad failure symptoms: The car will vibrate when starting, and the stability of the car will be reduced during driving. After the transmission mount pad is damaged, it needs to be replaced immediately. If the transmission mount completely breaks during driving, the support force of the transmission will lose balance. Whether it's an automatic or manual transmission model, the gear shifting will become abnormal during operation. A damaged transmission mount can also cause jerking during transmission operation. The reason for this phenomenon is that the transmission oil temperature is too high, and impurities have appeared inside the transmission oil, leading to jerking during operation.
6
4
Share

Will there be any impact after resetting the transmission?

Resetting the transmission may have some impact, such as increased fuel consumption and gear shifting jerks, but these issues will resolve after some time because the transmission's computer has a learning function. There are three common types of automatic transmissions in vehicles: dual-clutch transmission (DCT), automatic transmission (AT), and continuously variable transmission (CVT). The dual-clutch transmission simply adds an extra set of clutch and shift control mechanism compared to a manual transmission. One set of clutches controls the odd-numbered gears, while the other controls the even-numbered gears. The CVT transmission offers relatively smoother gear shifting. The AT transmission is an automatic transmission with a complex structure and mature technology.
11
5
Share

Where is the OBD interface of Peugeot 3008?

The OBD interface of Peugeot 3008 is located under the steering wheel, specifically at the place where the driver's left knee touches. Inside is the OBD interface. The OBD interface is also called the computer interface, which is translated into Chinese as the on-board diagnostic system. This system constantly monitors the operating conditions of the engine and the working status of the exhaust after-treatment system. Once a problem is detected, it will record and store the issue. The Peugeot 3008 features a rounded front end, with the engine hood, full front bumper, fenders, and A-pillar all exhibiting a plump and smooth design. This car also offers eight color options for consumers to choose from: Pearl Black, Deep Sea Blue, Neptune Gray, Rainforest Brown, Babylon Red, Mist Gray, Crystal Silver, and Ivory White.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.