What viscosity oil should be used for Chery Fengyun 2?

Why Does the Exhaust Pipe Smell Like Gasoline?

The reasons for the exhaust pipe smelling like gasoline: 1. There is an issue or malfunction in the car's ignition system, such as spark plug leakage, weak high voltage, or weak spark, etc.; 2. Incomplete or insufficient combustion of the fuel-air mixture. Reasons for car smoke: 1. Black smoke is mainly due to poor combustion; 2. Blue smoke is mainly caused by burning engine oil, severe wear between the piston rings and cylinder liners, poor sealing, and more engine oil entering the combustion chamber, which also results in blue smoke; 3. White smoke is mainly liquid vapor. Water is one of the combustion products. During cold starts, when the vehicle's temperature hasn't risen yet, the water vapor condenses when it meets the cold exhaust pipe, forming white smoke. This is normal and a common occurrence of white smoke. However, under ordinary circumstances, white smoke might be caused by improper refueling, water mixed into the fuel, or damage to the cylinder, allowing coolant to enter the cylinder through gaps, which is then expelled in gaseous form under high temperatures.

1

0

Share

What are the auxiliary configurations of the Touran?

Touran is equipped with front and rear parking radars, reversing camera, cruise control, automatic parking, engine start-stop, auto hold, and hill start assist. The above configurations are not standard across all models; only the top-tier model includes all of these features. Touran is an MPV model, available in both six-seater and seven-seater versions. Below are the relevant configurations of the Touran: 1. The Touran is powered by a 1.4-liter turbocharged engine, which is the well-known EA211 series. This engine can be found in many Volkswagen vehicles. 2. The Touran's engine delivers a maximum power of 110 kW and a maximum torque of 250 Nm, with the maximum power achieved at 5,000 rpm and the maximum torque available between 1,750 and 3,000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 3. The Touran is paired with a 7-speed dual-clutch transmission. 4. The Touran's front suspension uses a MacPherson independent suspension, while the rear suspension employs a four-link independent suspension.

5

4

Share

What are the layout forms of automotive transmission systems?

Automotive transmission systems have the following layout forms: 1. Front-engine, rear-wheel drive—FR: This is a traditional layout where the engine is placed at the front and the rear wheels are driven. Most trucks, some sedans, and some buses, both domestically and internationally, adopt this layout. 2. Rear-engine, rear-wheel drive—RR: In this layout, the engine is placed at the rear, and the rear wheels are driven. It is commonly used in large buses, with a few micro and light sedans also adopting this form. The rear-engine placement prevents the front axle from being overloaded, maximizes cabin space utilization, effectively lowers the floor height or utilizes the space under the middle floor for luggage storage, and reduces the impact of engine heat and noise on the driver. 3. Front-engine, front-wheel drive—FF: In this layout, the engine is placed at the front, and the front wheels are driven. This configuration features simple control mechanisms and good engine cooling conditions. However, during uphill driving, the vehicle's weight shifts backward, reducing the adhesion weight of the front drive wheels and making them prone to slipping. During downhill braking, the weight shifts forward, overloading the front wheels and increasing the risk of rollover at high speeds. Most sedans today use this layout. 4. Mid-engine, rear-wheel drive—MR: The engine is placed between the front and rear axles, with the rear wheels being driven.

5

1

Share

What Causes the ABS Light to Illuminate While Driving?

ABS light illumination can occur in various states, each with different causes and solutions, as detailed below: State 1: ABS warning light remains constantly on (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting its ability to detect wheel speed signals. This prevents the ABS control unit from determining vehicle speed or calculating wheel slip rates, thus failing to issue appropriate braking commands. Solution: Clean the wheel speed sensor and adjust the gap between the sensor and the tone ring to restore normal function. Cause 2: Loose connections in system wiring or poor contact in ABS relays causing signal interference. Solution: Inspect wiring connections and secure any loose terminals. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: Battery voltage drops below 10.5V when multiple electrical components are in use. The light extinguishes when engine RPM increases and voltage rises. Possible low voltage supply to ABS system due to poor terminal contact or grounding issues. Solution: Check battery specific gravity; inspect charging system; examine power supply components (voltage relay or loose power connections). State 3: ABS warning light stays illuminated after engine start until engine is turned off. Cause: Poor grounding connection at ABS hydraulic valve body; faulty wiring harness connection at valve body; ABS control module malfunction. Solution: Loosen and retighten hydraulic valve body ground screw, cleaning contact surfaces if necessary; check for connector pin gap expansion; replace ABS or ABS/ASR control module. State 4: ABS warning light activates during high-speed driving. Cause: ABS control module detects excessive speed difference between front and rear wheels; incorrect tire or wheel rim specifications. Solution: Verify proper tire and wheel rim specifications as indicated on vehicle's fuel filler door label. State 5: ABS warning light flashes intermittently. Cause: Improper brake light switch adjustment; internal contact failure in brake lights. Solution: With engine running, fully depress brake pedal while manually pushing brake switch linkage downward, then release pedal to reset position; replace brake light switch if necessary. When the ABS warning light is illuminated, continued driving is not recommended. An active ABS fault indicates potential loss of anti-lock braking function, which may cause wheel lock-up during emergency braking, resulting in loss of vehicle control and compromised ability to decelerate or steer - presenting significant safety risks.

10

4

Share

What is the fuel consumption of the Q50L?

The Q50L has a total of 11 models currently on sale, including the 2022 2.0T Comfort Edition, 2022 2.0T Enjoyment Edition, 2022 2.0T Luxury Edition, and others—all equipped with a 211-horsepower engine, featuring an NEDC fuel consumption of 7.4L per 100 kilometers. The fuel tank capacity varies across different Q50L models. The distance that can be covered on a full tank of fuel is as follows: For models equipped with the 211-horsepower engine, the fuel tank capacity is 76L, allowing a driving range of 76/7.4*100=1027KM on a full tank. Vehicle fuel consumption is directly influenced by five major factors: driving habits, the vehicle itself, road conditions, natural wind, and ambient temperature. Specific factors that increase fuel consumption include: Driving habits: Aggressive driving behaviors such as rapid acceleration, frequent overtaking, and not easing off the throttle before stopping at traffic lights can increase fuel consumption. The vehicle itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements, as higher displacement typically means greater power output, requiring more gasoline for combustion. Heavier vehicles also tend to have higher fuel consumption due to the increased torque needed for propulsion. Road conditions: Driving on unpaved roads, muddy surfaces, soft terrain, or mountainous routes increases resistance, leading to higher fuel consumption. Natural wind: Driving against strong winds or in windy conditions increases aerodynamic resistance, raising fuel consumption. Low ambient temperatures: When the engine block is cold, injected gasoline does not vaporize as easily during cold starts, requiring more fuel for combustion and thus increasing consumption. Additionally, in colder conditions, the engine control unit may command higher idle speeds to warm up the engine, further increasing fuel usage.

9

3

Share

When Can You Schedule the Subject Four Exam After Passing Subject Three?

According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the time varies depending on the type of license. Taking a Class C license as an example: After passing the Subject Three exam, you can take the Subject Four exam directly in the afternoon of the same day, without an appointment within 9 days, or schedule it after 10 days. Direct exam in the afternoon of the same day: Since Subject Four is the theoretical part of Subject Three, most cities schedule both Subject Three and Subject Four together when making the appointment. Therefore, on the afternoon of the day you pass Subject Three, you can go directly to the Subject Four exam venue to take the test. No appointment needed within 9 days: With the upgrade of driving test services, some cities have introduced a new model where no appointment is needed within 9 days. Candidates who pass Subject Three can take the Subject Four exam within 9 days by presenting their ID card at the Subject Four test center. Exam staff will group candidates for waiting: one group for no-appointment candidates and another for scheduled candidates, facilitating exam management by the test center. Scheduling after 10 days: The success of scheduling Subject Four depends on the current number of examinees, the priority of the candidates, and temporary arrangements at the test center. Candidates closer to the 3-year validity period have higher scheduling priority and are more likely to succeed. Additionally, unexpected events (such as the pandemic) that lead to exam suspensions can also affect the success rate of scheduling. Subject Four, also known as the Subject Four Theory Exam or Driver Theory Exam, is part of the motor vehicle driver's license assessment. It includes requirements for safe and civilized driving operations, knowledge of safe driving under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge. Subject Four Exam Notes: Exam duration: The exam lasts 45 minutes. Number of questions: Depending on the type of license, 50 questions are proportionally selected from the corresponding Subject Four question bank, with each question worth 2 points. Question types: The exam includes single-choice questions (including true/false questions) and multiple-choice questions. The questions may involve animations, images, scenario recognition, or text descriptions. Retake notes: If you fail Subject Four, you only need to retake Subject Four. The driving school will schedule the retake, with no limit on the number of retakes. You can retake it until you pass, and no retake fee is required for Subject Four. Subject Four Exam Tips: Strengthen weak areas and identify the reasons for mistakes. For marked questions, don't just memorize the correct answer. Refer to regulations, textbooks, or reference books to understand and digest the reasons for errors. Categorize and summarize questions. Refer to the question bank analysis for classification and find similar questions: Many questions in the bank are similar and easily confused, so they should be analyzed and summarized. For example, traffic signs for walking, hiking, pedestrian caution, crosswalks, and crosswalk caution are very similar and easily confused. During study, categorize them to avoid mistakes. Find memory techniques: Many questions in the bank involve numbers. Summarizing these numbers can make them easier to remember. The driving test consists of three subjects: Subject One, Subject Two, and Subject Three. Subject Three is divided into two parts. Subject Four is the colloquial term for the Subject Three Safe and Civilized Driving Knowledge Exam and is not a separate subject. Subject One refers to the road traffic safety laws, regulations, and related knowledge exam. Subject Two refers to the field driving skills exam. Subject Three refers to the road driving skills and safe and civilized driving knowledge exam. The safe and civilized driving knowledge exam is conducted after Subject Three.

12

3

Share

What viscosity oil should be used for Chery Fengyun 2?

Why Does the Exhaust Pipe Smell Like Gasoline?

What are the auxiliary configurations of the Touran?

What are the layout forms of automotive transmission systems?

What Causes the ABS Light to Illuminate While Driving?

What is the fuel consumption of the Q50L?

When Can You Schedule the Subject Four Exam After Passing Subject Three?

Does the BMW M4 have a 4-door version?

What is the logo of the Volkswagen Phaeton?

Which off-road vehicles come with three differential locks?

Is the Ingenium engine developed by Chery?