···
Log in / Register

What vehicles can be driven with an M license?

3 Answers
VanNoah
07/28/25 1:34pm
M license is a driving license for wheeled self-propelled machinery, allowing the holder to operate wheeled self-propelled machinery. Wheeled self-propelled machinery is divided into rail wheeled self-propelled machinery and ordinary wheeled self-propelled machinery. The former includes train locomotives, bullet trains, rail cars, rail motorcycles, rail cranes, and specialized railway construction machinery. The latter includes automobiles, tire cranes, road rollers, tractors, harvesters, and specialized construction machinery. Precautions: The speed of wheeled specialized machinery should not exceed 15 kilometers per hour when passing through narrow roads, narrow bridges, and sharp turns. It is not allowed to perform lateral lifting operations on slopes with a gradient of more than 5%. If such operations are necessary, the vehicle body should be leveled. Wheeled specialized machinery cannot carry passengers or tow other vehicles. When operating wheeled specialized machinery, the driver should not extend their head, hands, feet, or other limbs outside the vehicle. When leaving the vehicle, the driver should tighten the handbrake, cut off the power supply, and lock the doors.
Was this review help?
7
3
Share
VivianDella
08/11/25 6:12pm
As a frequent motorcycle enthusiast, I learned about the various types when obtaining my driver's license. In China, there are mainly three categories of motorcycle licenses: the D license is for three-wheeled motorcycles, allowing you to ride three-wheelers and all two-wheeled motorcycles; the E license is for two-wheeled motorcycles, suitable for regular or high-displacement two-wheeled models; the F license is for light motorcycles, permitting only small-displacement, low-speed models. Your choice should depend on the type of motorcycle you usually ride. For example, if you commute on a light motorcycle, the F license may suffice, while those seeking performance should opt for the E or D license. The first step to safe riding is matching your license to your motorcycle type—riding without the proper license is dangerous and can lead to accidents or fines. It's advisable to consult a driving school about the training process and understand the requirements before taking the test. Don't cut corners and ride recklessly.
Was this review help?
15
2
Share
Expand All
SanRyder
09/29/25 2:06am
From the perspective of maintaining road safety, I fully understand the importance of the permitted vehicle types on a driver's license. In the motorcycle field, a Class D license permits riding three-wheeled and two-wheeled motorcycles; a Class E license permits riding two-wheeled motorcycles; and a Class F license only permits riding light motorcycles. If you hold an F license but ride a large-displacement motorcycle, that constitutes driving beyond the permitted scope, which may lead to penalties and risks. Develop the habit of checking your license type when riding to ensure it matches the motorcycle you are actually riding. In daily travel, don't overlook this detail—safe riding is fundamental.
Was this review help?
1
0
Share
Expand All
More Forum Discussions

What are the reasons for sudden inability to play in-car music?

Here are the specific reasons for the sudden inability to play in-car music: 1. Loose USB flash drive: Since the USB flash drive is plugged into the vehicle's USB interface for a long time, when the vehicle is moving, the vibration and shaking of the car body may cause it to become loose. If the USB flash drive becomes loose with the USB interface, it is very likely to cause the music to suddenly stop playing. 2. Damaged USB flash drive: Although the possibility of a damaged USB flash drive is very small, due to the less-than-ideal environment inside the car (especially under high temperatures in summer), the possibility of damage cannot be ruled out. 3. File corruption: Corrupted music files may also suddenly cause the music in the USB flash drive to stop playing.
18
5
Share

What is the wading depth of the X-Trail?

The wading depth for the X-Trail SUV model should preferably not exceed 0.3 to 0.4 meters. More details about vehicle wading depth are as follows: 1. Point one: Since the exhaust outlet is lower than the air intake, referencing the position of the exhaust pipe is a safe approach. Once the water depth exceeds the height of the exhaust pipe, the probability of the vehicle stalling increases. 2. Point two: For ordinary sedans, the exhaust outlet is typically 20 to 30 centimeters from the ground, while for SUV models, it is 30 to 40 centimeters. Therefore, as long as the water level does not exceed two-thirds of the tire height, drivers can proceed with confidence. 3. Point three: When the water depth is one-third of the tire height, it is safe to pass through. However, caution is advised when the water depth exceeds half of the tire height, as this can easily lead to water entering the vehicle interior.
9
1
Share

What are the differences between the 2021 and 2022 T-Cross models?

The differences between the 2022 and 2021 T-Cross models are as follows: Different maximum engine torque: The 2022 T-Cross has a maximum engine torque of 320 N·m; the 2021 model has a maximum engine torque of 250 N·m. Different maximum engine horsepower: The 2022 T-Cross has a maximum engine horsepower of 186 hp; the 2021 model has a maximum engine horsepower of 150 hp. Both the 2022 and 2021 T-Cross models feature a 5-door, 5-seat SUV body type, equipped with a 7-speed dual-clutch transmission, a fuel tank capacity of 60L, a luggage compartment volume of 495L, front-wheel drive, MacPherson independent front suspension, and multi-link independent rear suspension.
4
5
Share

Can the Toyota Vios be driven on highways for long distances?

Toyota Vios can be driven on highways for long distances, and it is recommended to maintain a speed of around 110 km/h for better fuel efficiency. Introduction to Highways: Highways refer to high-speed roads, compared to medium-speed and low-speed roads. In environments where low speed is the norm, low speed is considered standard or normal speed, while in environments where medium speed is the norm, medium speed is considered standard or normal speed. Precautions before entering a highway: Check the weather and road conditions, perform a safety inspection of the vehicle, plan the driving route in advance, carry a vehicle breakdown warning sign and a fire extinguisher, and determine a driving and rest schedule beforehand. Items to prepare: The vehicle must have a license plate, and the owner should also bring their driver's license, vehicle registration, insurance card, and toll fees.
17
1
Share

What do the A and B buttons on the Nissan trip reset represent?

Nissan trip-reset button A represents kilometers, and button B represents miles. How to use the Nissan trip-reset button: First, locate the button position, which is below the left vent on the steering wheel. The button has short-press and long-press functions. A short press switches the display between total mileage, single-trip mileage, instant fuel consumption, and average fuel consumption—differences can be observed on the instrument panel. For a long press, first short-press to switch to single-trip mileage, then long-press the button to reset the single-trip mileage data displayed on the instrument panel. Upon reaching the destination, the displayed mileage will show the distance traveled. Function of the Nissan trip-reset button: "Trip" refers to the trip meter or can be understood as a single-trip mileage toggle button, displaying the mileage traveled for each trip on the instrument panel. "Reset" means to clear and reset the single-trip mileage data.
17
1
Share

What is the tire specification model for the ninth-generation Honda Accord?

The ninth-generation Accord tire specification is 215/60R16, where 215 refers to the tire width, 60 refers to the aspect ratio, R stands for radial tire, and 16 indicates the 16-inch wheel hub. Methods to distinguish tires: The model of a tire can be identified based on the data on the side of the car tire. Generally, the side of the tire will indicate the tire width, aspect ratio, tire type, and the applicable size of the tire. When purchasing tires, observe the data of your own tires and then make a purchase accordingly. Meaning of tire model: There will be a series of numbers marked on the side of the tire. These numbers are separated, and generally, the first three digits refer to the width of the car tire. Typically, the width of the tire ranges between 145 and 285, and different car displacements may also result in the use of different tire specifications.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.