What vehicles can be driven with an E-class driver's license?

2 Answers
AryaLynn
08/27/25 5:13am
An E-class driver's license allows the operation of regular two-wheeled motorcycles and light motorcycles. Below is an introduction to motorcycle classifications: 1. Motorcycles are categorized by engine displacement and maximum speed into light motorcycles and regular motorcycles. Light motorcycles have an engine displacement below 50cc and a maximum speed under 50 km/h, while regular motorcycles have an engine displacement above 50cc and a maximum speed exceeding 50 km/h. 2. Based on wheel count and configuration, motorcycles are divided into two-wheeled motorcycles, sidecar motorcycles, conventional three-wheeled motorcycles, and reverse three-wheeled motorcycles. In China's driver's license classification system, D-class, E-class, and F-class licenses are all for motorcycles. Among these, a D-class license permits the operation of vehicles covered by both E-class and F-class licenses.
Was this review help?
5
3
Share
DiLena
09/09/25 4:13am
When I first got my Class E license, all I could think about was the thrill of riding big-displacement motorcycles. As a young guy, this license specifically covers bikes over 50cc, like common street bikes, sports bikes, or off-road motorcycles. I usually ride a street bike, which feels especially fun for cruising around the city. But I gotta remind new riders—don’t get too excited and speed off. This isn’t a car license; you can’t drive sedans or trikes, just motorcycles. Never skimp on safety gear—I always wear a full-face helmet and knee guards, even when it’s hot in summer. My instructor kept nagging me during training: check your brakes and tires regularly, especially when it rains and the roads get slippery—ride carefully. I’d suggest practicing on quiet roads for your first ride—don’t get reckless. Overall, the Class E license gave me the freedom to ride, but it also comes with responsibility—always follow traffic rules.
Was this review help?
4
4
Share
Expand All
More Forum Discussions

What are the effects of excessive engine oil on the engine?

The effects of excessive engine oil on the engine are: 1. Increased fuel consumption; 2. Reduced power output; 3. Accelerated carbon buildup; 4. Damage to certain engine components; 5. Potential leakage from crankshaft oil seals; 6. Shortened engine oil shelf life. The functions of engine oil include: lubrication, auxiliary cooling, cleaning, sealing to prevent leaks, rust and corrosion prevention, shock absorption, and anti-wear protection. Engine maintenance methods include: 1. Using qualified engine oil; 2. Using qualified coolant and antifreeze; 3. Regularly cleaning radiator scale; 4. Periodically removing engine carbon deposits; 5. Timely replacement of the three automotive filters (air, oil, and fuel); 6. Maintaining appropriate engine RPM.
7
0
Share

How long does it take to schedule a Subject 2 driving test?

Scheduling a Subject 2 test generally takes about one week. Here are the key points to note for the Subject 2 test: 1. Reverse Parking: The main deductions for reverse parking include hitting the line, failing to enter the parking space, exceeding the time limit, and not following the designated route. After the new regulations, reverse parking now has a time limit of 210 seconds; exceeding this time results in failure. During the test, perform the right-side reverse first, followed by the left-side reverse. Not following this order will result in failure. Pay attention to maintaining a 30cm margin when parking. 2. Parallel Parking: The main deductions for parallel parking involve turn signals, maintaining a 30cm margin, and hitting the line. When entering the test area, steer right early and align the highest point of the wiper with the roadside line to adjust the 30cm margin. Remember the steps: first turn the wheel fully to the right, then straighten, then turn fully to the left, park, and turn on the left turn signal. When exiting, check the rearview mirror to avoid hitting the lines with the wheels. 3. 90-Degree Turn: The main deductions for the 90-degree turn involve turn signals and hitting the line. After entering the test area, turn on the turn signal and turn it off after the voice prompt. Incorrect use of the turn signal deducts 10 points. After entering the turn, adjust the car to maintain a 30cm margin from the line, similar to parallel parking. When turning the wheel fully, slightly release the clutch to prevent stalling or stopping midway. Straighten the car only after the rear wheels exit to avoid hitting the line.
6
3
Share

What Causes Throttle Shaking?

Throttle shaking can be caused by the following reasons: 1. Damaged spark plugs, where the wear of the spark plug electrode gap leads to insufficient spark ignition, causing incomplete combustion of the air-fuel mixture and resulting in acceleration shaking. 2. Cracks in the ceramic part of the spark plug, leading to no ignition in one cylinder, which causes acceleration shaking. 3. Poor quality gasoline, resulting in poor atomization by the fuel injector and incomplete combustion of the air-fuel mixture in the cylinder, leading to idle shaking. 4. Uneven tread on the four wheel tires, such as bulges or foreign objects. 5. Loose wheel bearings causing vehicle shaking during driving.
3
3
Share

What Causes the Tire Pressure Monitoring System Not to Display Tire Pressure?

If there is a response when stationary but not while driving, the reasons could be low transmission strength, insufficient receiver sensitivity, or interference. If there is no response when stationary and pairing fails, it indicates a transmitter failure or low signal transmission strength, which can usually be resolved by changing the placement position. Below are some additional details about tire pressure monitoring: 1. The module battery is depleted; replace the entire tire pressure monitoring module. 2. The module inspection port is blocked by something, preventing detection. 3. Pairing failure; re-pairing is required. Some models can do this independently, but most require professional pairing at a 4S shop. 4. The module is damaged; replace it with a new one.
3
3
Share

How to turn off the rear wiper on the Q3?

For the Q3 wiper controls, pulling the switch inward activates the front wipers, while pushing it outward activates the rear wiper. When the rear wiper is engaged, simply push the switch upward to turn it off. Relevant details are as follows: 1. In terms of exterior design, the domestic Q3 shares nearly identical styling with the imported version. 2. The interior features standard black leather seats and a black leather-wrapped steering wheel accented with silver chrome trim. 3. Powertrain options mirror the imported model - the 35TFSI comes with a 170hp 2.0T engine, while the 40TFSI gets a higher-output 211hp 2.0T unit.
13
0
Share

What does fault code P17C500 mean?

When the fault code P17C500 appears in a car, it indicates an issue with the vehicle's engine. According to diagnostics at a 4S dealership, this is caused by the car's computer system being overly sensitive and does not constitute a major fault. The problem can be resolved by clearing the fault code. Below is additional information about automotive fault codes: 1. Fault codes are detected using the diagnostic computer at 4S dealerships. Based on the specific fault code, technicians can identify which part of the engine is malfunctioning and perform targeted repairs, thereby improving maintenance efficiency. 2. Engine faults should be taken seriously as the engine is the most critical component of a vehicle. Any malfunction may render the car undrivable or cause other operational issues.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.