···
Log in / Register

What vehicles can be driven with an A3 driver's license?

3 Answers
LaneLee
07/28/25 5:30pm
An A3 driver's license allows you to drive buses and also covers the vehicle types permitted under a C1 license, such as small cars, small automatic transmission vehicles, low-speed trucks, and three-wheeled vehicles. Although buses exceed six meters in length and carry more than 20 passengers, they are not equivalent to large passenger vehicles like tourist buses. Therefore, holding only an A3 license does not permit you to drive large buses. An A1 license, however, allows you to drive both large buses and regular buses. Requirements for obtaining an A3 driver's license: 1. Age between 21 and 50 years old; 2. Height of at least 155 cm, naked or corrected vision of 5.0 or above, no red-green color blindness, and the ability to distinguish the direction of sound sources from a tuning fork 50 cm away with each ear; 3. Both thumbs must be intact, and each hand must have three other fingers intact with normal movement; 4. Normal movement of the torso and neck; normal movement of the lower limbs with a length difference of no more than 5 cm between the two legs.
Was this review help?
11
4
Share
PaisleyMarie
08/11/25 9:36pm
For friends aiming for an A3 driver's license, I've got some insights. This license specifically qualifies you to operate urban public buses—those large coaches running city routes, capable of carrying over a dozen passengers, crucial for public services. But don't think about driving family cars or minivans; those require a C1 license. Nor can you handle tow trucks or heavy trucks—that's the domain of an A2 license. When learning for this license, the focus is on safely operating public transportation systems, like turning and stopping at stations. I recall regulations are strict, with significant liability in case of accidents, so beginners must choose accredited driving schools for practice. Regular vehicle maintenance is also vital—check tires and brakes often. In short, the A3 license is all about urban transport; it's not a free pass to drive anything.
Was this review help?
12
1
Share
Expand All
SanJanelle
09/30/25 2:13am
I often drive a bus to commute to and from work, relying on my A3 driver's license. This license only permits me to operate large-sized city buses, transporting passengers through the streets, and dealing with daily traffic congestion really tests my skills. I can't drive regular cars or private SUVs—those require a B or C license; motorcycles are out of the question, as they require an E license. In practice, I've gotten used to adjusting routes and monitoring onboard equipment, with safety always being the top priority. I recommend that newly licensed drivers start practicing on simpler routes and avoid rushing into peak-hour shifts right away. Be cautious with aging equipment, especially the braking system. The core of the A3 license is ensuring smooth public transportation—don't misuse it.
Was this review help?
15
1
Share
Expand All
More Forum Discussions

Why does the car key not respond when pressed even though it has power?

Reasons why a car key with power does not respond when pressed: 1. Severe signal interference in the surrounding environment; 2. The key's control unit is damaged; 3. The key code does not match; 4. Dirt inside the key causing poor contact; 5. The distance from the car is too far; 6. A fault with the vehicle itself, such as a damaged circuit board relay or issues with the vehicle's central control system. Normally, a car key comes with a mechanical key. You can use the mechanical key in an emergency to drive the car to another location. If it works normally, it indicates severe signal interference near the car. You can also disassemble the key and clean it with alcohol. If it still does not work, it is recommended to visit a 4S shop or a professional auto repair shop for inspection.
2
5
Share

What Causes the Clutch Pedal to Have No Pressure and Unable to Engage Gear?

Clutch Pedal to Have No Pressure and Unable to Engage Gear is caused by: debris inside the clutch, improper adjustment of the booster push rod travel, air in the clutch hydraulic system, or excessive free travel of the clutch pedal. The issue can be diagnosed by following an external-to-internal inspection process. First, check if the booster push rod travel and clutch pedal free travel meet the standard specifications. Then, inspect the clutch for any debris or other obstructions to systematically eliminate potential faults. The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch serves as the input shaft of the transmission. During driving, the clutch temporarily disengages and gradually re-engages the connection between the engine and the transmission based on the driver's operation of the clutch pedal, thereby transmitting power from the engine to the transmission.
7
1
Share

How much speed should be reduced when downshifting from 4th gear to 2nd gear?

When downshifting from 4th gear to 2nd gear, the vehicle speed should be reduced by at least 20 kph, bringing it within the 20 to 30 kph range, which is generally suitable for 2nd gear. This is the conventional method for deceleration. However, if the purpose is to downshift for increased torque and acceleration, the speed does not need to be reduced. You can directly shift to 2nd gear, but it's important to blip the throttle before releasing the clutch after the shift to raise the engine speed to match the current vehicle speed, preventing noticeable jerking. For example, when in 4th gear at 60 kph with the engine at 2500 rpm, shifting to 2nd gear would require increasing the engine speed to around 4000 rpm. Releasing the clutch at this point ensures a smoother downshift.
11
3
Share

Do I need to register modifications for new car wheel rims?

For new cars, modifying wheel rims does not require registration as long as the size remains the same as the original rims. However, if the size is altered, registration is necessary. Unauthorized changes to rim size without registering with the vehicle management office will result in failed annual inspections, constitute illegal activity, and may lead to forced reversion, fines, and penalty points if caught by traffic police. According to motor vehicle registration regulations, any changes to the body color, model, performance, purpose, or structure of a licensed vehicle, including modifications to the frame, body, or engine, must be reported to the vehicle management office for registration. Upgrading to high-quality rims can improve heat dissipation and reduce weight, offering significant visual impact both statically and dynamically, while also enhancing the vehicle's handling performance.
12
2
Share

What is the battery model of Yueda Kia K3?

The original battery model of Dongfeng Yueda Kia K3 is CMF65L-BCI, with a rated voltage of 12V and a rated capacity of 60Ah. Best battery maintenance methods: 1. Keep the battery firmly fixed and the top of the battery clean and dry. 2. Keep the terminals and connections clean, secure, and coated with Vaseline or terminal grease. 3. If electrolyte spills from the battery, immediately wash it with a solution of water and baking soda. 4. If the vehicle is not used for a long time, disconnect the battery cables. 5. If the battery needs to be discharged quickly in a short time (e.g., turning on the headlights or interior lights while the vehicle is not in use), charge it slowly (low current) for 10 hours. 6. If the battery discharges slowly due to high electrical load, charge it at 20-30A for 2 hours.
12
1
Share

Where is the seat heating switch in the Passat?

The seat heating switch in the Passat is located on the right side of the steering wheel, at the far left of the center console's combination switch. The steps to use the seat heating switch are as follows: 1. Open the driver's side door; 2. Press the brake pedal; 3. Press the one-touch start button to start the engine; 4. The dashboard lighting up indicates that the vehicle's electronic system is powered; 5. Press the seat heating switch button; 6. The seat will warm up after about 10 minutes of preheating the resistance wires. The Passat is a mid-size car produced by SAIC Volkswagen, featuring a MacPherson strut front suspension and a multi-link independent rear suspension. In terms of dimensions, it measures 4933mm in length, 1836mm in width, and 1469mm in height, with a wheelbase of 2871mm. It is powered by a 1.4T turbocharged engine paired with a 7-speed dual-clutch transmission.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.