What vehicles can be driven with a Class E driver's license?

1 Answers
StIsla
07/29/25 6:07pm
Class E driver's license permits driving ordinary two-wheeled motorcycles and vehicles allowed by Class F license. A Class F license authorizes the holder to operate light motorcycles. According to the regulations on the application and use of motor vehicle driver's licenses, a light motorcycle is defined as one with an engine displacement of 50ml or less and a maximum design speed of 50km/h or below. The full name of a driver's license is motor vehicle driver's license, which is a legal document issued by the administrative authorities after the applicant has learned traffic regulations and driving skills, passed the required tests, and is legally permitted to drive certain types of motor vehicles.
Was this review help?
9
4
Share
More Forum Discussions

How Many Cylinders Does the Envision Engine Have?

The Buick Envision is equipped with a 4-cylinder engine. Below are the specific details about the Envision's engine: 1. The Envision is powered by 1.5t and 2.0t engines, with model numbers LFV and LTG, respectively. 2. The LFV engine has an actual displacement of 1490ml, featuring 4 cylinders arranged in an L-formation, with turbocharged intake. 3. The LTG engine has an actual displacement of 1998ml, also featuring 4 cylinders arranged in an L-formation, with turbocharged intake. Here are some extended guidelines for car engine usage: 1. Avoid driving in neutral: The engine has a fuel-cut function during deceleration, and driving in neutral is not fuel-efficient. 2. Pay attention to observations during vehicle use; if you notice oil stains on the ground, determine whether there is an engine oil leak and promptly communicate with the car 4S store to eliminate potential safety hazards. 3. For vehicles equipped with turbochargers, do not shut off the engine immediately after high-speed driving or climbing slopes; let it idle for 10 minutes before turning it off. 4. If brake fluid is contaminated with or absorbs water, or if impurities or sediments are found in the brake fluid, replace or carefully filter it promptly. Otherwise, it may lead to insufficient braking pressure, affecting braking performance.
1
1
Share

Where is the Roewe i5 engine manufactured?

The Roewe i5's engine is manufactured in China, developed independently by SAIC Motor as the Blue Core engine, known for its strong power and low fuel consumption. The Roewe i5 is equipped with two types of engines: a 1.5-liter naturally aspirated engine and a 1.5-liter turbocharged engine. Below are the details of these two engines: 1. The 1.5-liter turbocharged engine has a maximum power of 124 kW, a maximum torque of 250 Nm, a maximum power speed of 5500 rpm, and a maximum torque speed ranging from 1700 to 4300 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 2. The 1.5-liter naturally aspirated engine has a maximum power of 88 kW, a maximum torque of 150 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed of 4500 rpm. This engine is equipped with DVVT technology and uses an aluminum alloy cylinder head and a cast iron cylinder block. It is paired with either a 5-speed manual transmission or a CVT transmission.
3
4
Share

What to Do When the Trumpchi GS8 Won't Start?

There are two main reasons and solutions for the Trumpchi GS8 not starting: 1. Electrical circuit issues. 2. Problems with the ignition coil or spark plugs. 3. Solution: Visit a 4S shop to have a professional technician read the fault codes and diagnose the issue. Below is some extended information about the Trumpchi GS8: 1. The Trumpchi GS8 is equipped with a 2.0-liter turbocharged engine, producing 252 horsepower and a maximum torque of 390 Nm. The engine's maximum power is achieved at 5250 rpm, and the maximum torque is available between 1750 to 4000 rpm. This engine features DCVVT technology and direct fuel injection, with an aluminum alloy cylinder head and a cast iron cylinder block. It is paired with a 6-speed automatic transmission. 2. The front suspension of the Trumpchi GS8 uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension.
10
5
Share

Is Lexus Maintenance Free?

Lexus after-sales maintenance is not entirely free. There are different free maintenance policies for two types of vehicles: gasoline vehicles receive free maintenance for 4 years or 100,000 kilometers, while hybrid models enjoy free maintenance for 6 years or 150,000 kilometers. Below is extended information about Lexus after-sales maintenance: 1. Lexus free maintenance includes standard major and minor services, covering both parts and labor costs, with no charge for replacing brake discs and pads. 2. "Cleaning" services are not included in the free maintenance. Examples include throttle body cleaning, fuel injector cleaning, and fuel system cleaning. 3. Services such as wheel balancing and four-wheel alignment are not part of the free maintenance program. Lexus recommends rotating all four wheels every 20,000 kilometers to prevent uneven tire wear.
11
5
Share

How to Remove the Verna Brake Light Switch?

The following are the steps to remove the Verna brake light switch: 1. Remove the cover plate: The brake light switch is located above the brake pedal, with a spring contact pressing against the brake pedal linkage. The cover plate is the base plate above the brake, clutch, and accelerator pedals, secured by three self-tapping screws and supported by two plastic clips inside. Metric hex keys are required to remove the self-tapping screws. 2. Disconnect the wiring: After removing the cover plate, the brake light switch can be seen above the brake pedal. The switch connector is a clip-type; gently squeeze the clips on both sides to disconnect it easily. 3. Remove the switch: This switch is a twist-lock type and cannot be pulled out by force. Hold the switch and twist it to the left to remove it smoothly.
19
5
Share

How to Set the Tire Pressure Display on the Levin?

Here are the steps to set the tire pressure display on the Levin: 1. Press and hold the MENU button for 3 seconds. After a beep sound, you will enter the setup function. 2. Press and hold the ADJ button for more than 3 seconds, and the low-pressure alarm value will cycle between 1.8 and 3.2. Release the button when the desired value flashes. 3. Press and hold the MENU button for 3 seconds. Upon hearing two beeps, the settings will be saved and you will exit the setup. Unit setting: Press and hold the MENU button for 3 seconds to enter the setup function after a beep sound. Press the ADJ button briefly to switch between BAR and PSI units.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.