What vehicles can a B1 driver's license drive?

1 Answers
Mateo
07/28/25 4:12pm
The B1 driver's license is authorized to drive medium-sized buses, which are defined as medium-sized passenger vehicles with a length of less than 6 meters and a seating capacity of more than 9 but less than 20 people. Common models include the Toyota Coaster, Jiangling Transit, and Jinbei Haise. New regulations for driver's license annual review: Holders of A and B licenses must now undergo annual reviews instead of biennial reviews. Drivers with no demerit points can be exempted from the review. According to current regulations, A and B license holders must submit a physical condition certificate every two years and participate in an annual review. As per the Ministry of Public Security's Order No. 123 on the application and use of motor vehicle driver's licenses, only A and B license holders with demerit points are required to participate in the annual review, during which they must declare their physical condition. Drivers without any demerit points in a scoring cycle are exempt from the annual review and physical condition declaration.
Was this review help?
2
3
Share
More Forum Discussions

Is it a problem to continue driving with a faulty wheel speed sensor?

There is indeed a problem. Once the wheel speed sensor is damaged, it not only causes a certain deviation in the speed display on the dashboard but also leads to unstable engine idling and reduced acceleration performance. Additionally, when the vehicle starts or decelerates to a stop while driving, it is prone to sudden pauses and may even stall directly, which significantly affects driving safety to some extent. Classification of wheel speed sensors: Magnetic wheel speed sensors: Designed based on the principle of electromagnetic induction, they feature a simple structure, low cost, and resistance to mud and dirt, making them widely used in modern car ABS anti-lock braking systems. Hall-effect wheel speed sensors: Made using the Hall effect principle, these sensors are also widely applied in vehicles. They are characterized by output signal voltage amplitude not being affected by rotational speed, high-frequency response, and strong resistance to electromagnetic interference.
16
0
Share

Should You Engage First Gear or Release the Handbrake First When Starting a Car?

When starting a car, you should engage first gear before releasing the handbrake. This is to prevent the vehicle from rolling backward, especially when parked on an incline, as not all road surfaces are completely level. Releasing the handbrake first could lead to the vehicle rolling back, but engaging first gear before releasing the handbrake can prevent this issue. When starting the vehicle, pay attention to the following: 1. Always perform a visual check around the vehicle to ensure driving safety before starting; 2. Gradually and smoothly apply pressure to the accelerator pedal. Abrupt acceleration can cause the car to lurch forward, which not only affects driving safety but may also wear or damage the transmission components; 3. After a normal start, avoid turning or operating the steering wheel immediately. Only use it after ensuring driving safety. Otherwise, incorrect steering wheel operation may lead to accidents during driving.
10
2
Share

How far can a 15ah lithium battery run?

Calculating based on the maximum range: Battery capacity = 48*15 = 720WH = 0.72KWH. The average power consumption of an electric vehicle is 12KWH per 100 kilometers = 0.12KWH/KM, so the battery should be able to run 0.72/0.12 = 6 kilometers. With a 48V15AH battery and a 350W motor, equipped with a digital odometer, a flat road test with a passenger barely reached 48 to 50 kilometers. Here are some relevant factors: 1. The road conditions also play a role; if the route is mostly uphill, the range will definitely not reach that distance. 2. The vehicle's load also matters. If a 180-pound man and a 70-pound girl use the same vehicle with the same battery capacity, the range will be different.
12
2
Share

Is the valve spring of the new Jetta longer for the intake or exhaust?

The valve spring for the exhaust valve of the new Jetta is longer. Here are the relevant details: 1. The function of car valves: They are specifically responsible for introducing air into the engine and expelling the exhaust gases after combustion. Structurally, they are divided into intake valves and exhaust valves. The intake valve draws air into the engine to mix with fuel for combustion, while the exhaust valve expels the burned gases and dissipates heat. 2. Symptoms of damaged car valves: Abnormal noises may occur, the engine may experience unstable idling or poor acceleration during operation, overtaking performance may also decrease, and in severe cases, it may lead to difficulty starting the engine, failure to ignite, as well as air leakage or increased carbon deposits in the car.
11
1
Share

Can You Still Drive with One Broken Wheel Bolt?

It is not recommended to continue driving with one broken wheel bolt. Here is relevant information: Principle: When a vehicle is missing one bolt, the wheel axle experiences uneven force distribution during rotation, which can cause other bolts or nuts to loosen faster. This uneven pressure also increases the likelihood of other wheel bolts breaking while driving. The wheel and axle are secured by bolts and nuts evenly distributed on the hub, ensuring balanced force distribution during rotation. Risks: Such an issue during high-speed operation can severely impact driving safety. Therefore, if this happens near a repair shop, you may drive slowly to the location, keeping the speed below 100 km/h and avoiding bumpy roads to prevent loosening other bolts. If the vehicle shakes significantly, a tow truck must be called. It is advisable for drivers to carry a spare wheel bolt or nut to enhance driving safety.
20
1
Share

Will Insurance Cover Flood-Damaged Vehicles?

According to the relevant provisions of China's motor vehicle insurance clauses, vehicle losses caused by natural disasters such as rainstorms and floods fall under the insurance liability of the commercial auto insurance's vehicle damage coverage. Therefore, expenses incurred after a vehicle is submerged, including rescue costs, cleaning fees, electrical system damages, and interior component losses, are all covered by the vehicle damage insurance, and the insurance company should provide compensation. Additional Information: Secondary Ignition: If a vehicle stalls while driving through water and the driver attempts a secondary ignition, resulting in engine damage, this is not covered by the insurance. Therefore, it is crucial to avoid secondary ignition during water wading. Compensation for Other Vehicle Damages: Even if the engine is damaged, the vehicle damage insurance will cover other losses to the vehicle, excluding the engine.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.