What Vehicles Are Prohibited on Urban Expressways?

2 Answers
SanEmilia
07/28/25 3:31pm
Pedestrians, non-motorized vehicles, electric three- and four-wheelers (excluding new energy vehicles), motorcycles, disabled person-specific vehicles, tractors, tracked vehicles, agricultural vehicles, wheeled special machinery vehicles, specialized operation vehicles, trucks, and vehicles displaying test license plates or learner driver plates are prohibited from entering urban expressways. Prohibited behaviors on urban expressways: Reversing, driving in the opposite direction, making U-turns, or stopping in the lane under non-emergency circumstances; overtaking on ramps; riding or straddling lane dividers; and any other behaviors that violate road traffic safety laws and regulations. Precautions for driving on urban expressways: Parking, picking up/dropping off passengers, or loading/unloading goods is prohibited on urban expressways. Vehicles must queue up in the driving lane in order when encountering traffic jams or similar situations. If a vehicle breaks down and cannot operate normally, the driver must immediately turn on the hazard warning lights and move the vehicle to a place where it does not obstruct traffic. If the malfunction cannot be promptly resolved, the vehicle must be towed by a recovery vehicle, and repairing the vehicle in the driving lane is prohibited.
Was this review help?
1
1
Share
DelAbigail
08/11/25 10:56pm
I've driven on urban expressways countless times, and it seems these roads primarily prohibit vehicles that could disrupt traffic flow. Non-motorized vehicles like pedestrians, bicycles, and electric bikes are absolutely forbidden because they're too slow and prone to causing rear-end collisions. Additionally, slow-moving vehicles such as tractors and farm vehicles are also banned. Last time I was on the expressway, I saw a tractor being pulled over by police just because it could only do 30-40 km/h, forcing following vehicles to brake hard. Some special vehicles like large construction trucks or hazardous material transporters aren't allowed without permits, to avoid road blockages or dangerous leaks. Some cities even ban motorcycles as their small size but high speed makes them accident-prone when mixed with cars. These rules are all for our safety - I always remind new drivers to check local traffic apps or roadside signs before driving to avoid violations.
Was this review help?
7
2
Share
Expand All
More Forum Discussions

When to Steer When Turning a Car?

The timing for steering when turning is as follows: 1. When making a left turn and the road appears narrow, turn the steering wheel when the right corner of the car's front aligns with the roadside. 2. If the road is wide during a left turn, you can steer earlier. 3. When making a right turn on a narrow road, turn the steering wheel when the left front of the car aligns with the roadside. 4. For a right turn on a wide road, you can steer earlier. Precautions when turning: 1. Always slow down when turning the car, and avoid turning the steering wheel too quickly to prevent skidding. If the car skids, immediately release the accelerator pedal, steer the wheel toward the side of the rear-wheel skid, and wait for the car to stabilize before straightening the wheel and continuing to drive. 2. Avoid using the brake pedal when turning, especially emergency braking. 3. When turning, coordinate steering with the curve and match the speed, ensuring the turning angle is appropriate. Keep both hands on the steering wheel to prevent deviation and potential hazards.
11
1
Share

Should You Engage the Gear First or Release the Handbrake First When Driving?

Engage the gear first and then release the handbrake. The specific reasons are as follows: 1. Primarily for safety considerations, engaging the gear connects the power transmission route of the transmission. 2. When the gear is first engaged, the transmission is in first gear, where the torque is at its maximum. If the brake is not properly applied, the car may suddenly lurch forward. After engaging the gear, the handbrake should be released promptly to start moving. Below is some extended knowledge about the handbrake: 1. The handbrake, professionally referred to as an auxiliary brake, operates differently from the main brake. It uses a steel cable connected to the rear brake shoes to apply braking force to the vehicle. 2. Prolonged use of the handbrake can cause the steel cable to undergo plastic deformation. Since this deformation is irreversible, long-term use can reduce its effectiveness and increase the handbrake's travel distance. 3. The handbrake system also includes a return spring. When the handbrake is engaged, the spring is stretched, and when the handbrake is released, the spring returns to its original length.
10
3
Share

How to Solve the Problem of the Buick Excelle Fan Running Non-stop?

Here are the solutions for the Buick Excelle fan running non-stop: 1. If the fan keeps running, it might be due to a loose circuit connection. You can try unplugging the fan's wiring harness to perform a separate power-off treatment. 2. This situation could also be caused by a faulty water temperature sensor or a stuck fan relay contact. It is recommended to go to a 4S shop or a professional repair shop to replace it with a new one. Here is some extended information about car fans: 1. The fan inside the car serves a cooling function. After parking, if the coolant temperature is too high, the vehicle's computer will automatically calculate the fan's speed and duration. Therefore, the higher the temperature, the longer the fan runs, thereby protecting the engine. So there's no need to worry; this is a normal phenomenon. 2. The fan is installed between the engine and the radiator. When the fan blades are driven to rotate by the engine, they generate high-speed airflow that carries away the heat from the coolant in the radiator, thus cooling the engine.
10
4
Share

How to Set the Seat Memory in Explorer?

First, adjust the seat to the desired position, press button 1 or 2, then press the set switch, followed by pressing the unlock button on the remote key. Press the set button once, then press 1 or 2 to pair with the key. Below is an introduction to the Explorer: 1. The Explorer is a large SUV launched by Ford, positioned in the large SUV segment. It utilizes a significant amount of high-strength, lightweight materials such as boron steel and aluminum alloy, ensuring body rigidity while reducing weight, providing structural support for safety, handling, and fuel economy. In terms of technology, it features the Ford Co-Pilot360 driving assistance system, which integrates adaptive cruise control, automatic emergency braking, pedestrian detection, forward collision warning, blind-spot monitoring, lane-keeping assist, rearview camera, and automatic headlights. 2. For the interior, it comes standard with a 12.8-inch central touchscreen equipped with the SYNC+2.0 intelligent infotainment system. The instrument cluster adopts a full LCD display, allowing theme changes according to sport, economy, or snow modes. The steering wheel supports four-way electric adjustment, with multifunction buttons including multimedia control, adaptive cruise, and voice recognition.
8
1
Share

What Are the Pros and Cons of Steam Car Washing?

Steam car washing has the following pros and cons: Pros of steam car washing: 1. No chemical cleaners are used, ensuring the car body is not corroded; 2. Steam car washing consumes less water, making it energy-saving and environmentally friendly. 3. It has a remarkable stain-removing effect. Cons of steam car washing: 1. Potential safety hazards exist. 2. The steam car washing boiler is prone to scaling, making cleaning troublesome. 3. It takes a long time to preheat the water for steam generation. Principle of steam car washing: 1. Traditional car washing uses high-pressure water guns to rinse the car body to achieve the purpose of cleaning. 2. Steam car washing improves upon the shortcomings of traditional car washing, such as wastewater and long washing time. 3. Steam car washing uses highly efficient gas as the combustion material, combined with a high-performance steam generator, transforming the original cold-water spray washing into steam spray washing. 4. Steam, with appropriate pressure and temperature, thoroughly cleans, sterilizes, disinfects, and deodorizes every minute part of the car, achieving better cleaning results.
11
5
Share

What is the Meaning of FSI?

FSI stands for Fuel Stratified Injection technology, which achieves a perfect combination of engine power and fuel economy under the same displacement. It is a relatively mature and advanced direct fuel injection technology in the automotive industry. This technology utilizes electronic chips in fuel-injected engines to precisely control the injection quantity into the cylinder for combustion through calculation and analysis, thereby improving the engine's fuel mixture ratio and subsequently enhancing engine efficiency. Compared to traditional engines, FSI-based engines exhibit better dynamic response, simultaneous improvement in power and torque, and lower fuel consumption. FSI engines have at least two combustion modes: stratified combustion and homogeneous combustion, with the latter further divided into homogeneous lean combustion mode and homogeneous combustion mode.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.