What vehicle types can be driven with a B1 driver's license?

1 Answers
Alexis
07/23/25 8:34pm
B1 driver's license allows driving medium-sized passenger vehicles with a length not exceeding 6 meters and a rated passenger capacity of 10 (inclusive) to 19 (inclusive) people. The following is a detailed introduction about the B1 driver's license: 1. Overview: The B1 driver's license is a legal document required for driving medium-sized buses. If a holder of a B1 license wants to drive large trucks, they can upgrade their license to a B1B2 license (or A1, A2, A1A2, etc.). 2. Conditions: Applicants for medium-sized bus driving must be at least 150 centimeters tall. For large buses, tractors, city buses, medium-sized buses, large trucks, trolleybuses, or tram driving licenses, the naked or corrected vision of both eyes must reach 5.0 or above on the logarithmic visual acuity chart. Applicants must not have red-green color blindness.
Was this review help?
16
0
Share
More Forum Discussions

What does DTE on the car dashboard mean?

The DTE on the car dashboard indicates the estimated distance the vehicle can continue to travel with the remaining fuel in the tank. In other words, it shows the approximate mileage the car can cover with the remaining gasoline. The car dashboard is a device that reflects the working conditions of various vehicle systems. Different car dashboards may have different instruments, but common gauges in most vehicles include the speedometer, tachometer, oil pressure gauge, water temperature gauge, fuel gauge, and charging gauge. More details are as follows: 1. Handling the low fuel warning light on highways: When the fuel warning light comes on, the first step is to locate the nearest gas station. If you're on a highway, look for a service area or exit the highway immediately to find a gas station. 2. Operational handling: At the same time, control your speed appropriately, turn off high-power electrical appliances promptly, avoid congested roads, and try to drive smoothly to minimize braking. It is not recommended to wait until the fuel warning light comes on before refueling.
20
4
Share

How to solve the Buick fault code 128?

The meaning of the code 128 in the Buick Yinglang is that the engine hood is not closed tightly. Simply closing the engine hood properly should resolve the issue. If it cannot be closed, possible reasons include the hood cable not retracting, deformation of the hood lock, loose screws affecting the lock mechanism's position, misalignment of the lock mechanism, or a broken lock hook. More details are as follows: 1. Method to close the engine hood: To close the engine hood, first lower the support rod, then gently lower the hood by hand. When it is about 20 cm from the closing point, release your hands and let the hood fall freely. At this point, you should hear a crisp closing sound. If the hood is not completely closed, the gaps at the front and rear of the hood will be inconsistent, and you will need to reopen and lower the hood again. 2. Precautions: It is important to avoid opening or closing the hood with one hand or on one side only, as this can cause uneven gaps on both sides of the hood. Also, do not press the hood forcefully with your hands, as this may cause the hood to dent.
17
5
Share

What is the correct way to use a battery?

The correct way to use a battery is: 1. Charge it properly. A discharged battery should be charged within 24 hours. Batteries installed in vehicles should be recharged every two months, and batteries stored with electrolyte should also be recharged every two months; 2. Regularly clean dirt from the battery surface and remove oxides from the terminals, which are those green substances; 3. Do not use the starter continuously. Each start should not exceed 5 seconds, and there should be a 15-second interval between two uses of the starter. Before starting a cold engine in winter, idle the engine several times to warm it up. Install and handle the battery gently, and ensure it is securely fastened; 4. Prevent overcharging, over-discharging, and excessive charging current; 5. Regularly check the battery fluid level and add distilled water if it is too low. When connecting the battery, verify the polarity to avoid incorrect connections. Never place tools on the battery terminals to prevent safety accidents.
15
2
Share

Why does the dashboard not light up and the car fail to start with one-key start?

If the dashboard does not light up and the car fails to start with one-key start, it is highly likely that the dashboard is malfunctioning, with a common cause being damage to the dashboard CPU. At this point, press the horn; if the horn sounds loud, it indicates the battery is functioning properly, whereas if the horn does not sound, it suggests the battery is dead. Below are the advantages of one-key start: 1. No need for the original car key or remote to open the door: Simply approach within 2 meters of the car, and the door will automatically open. No need for the original car key or remote to lock the door; just move beyond 3 meters from the car, and the door will automatically lock. 2. No need to use the original car key to start: After entering the car, there is no need to use the original car key to start the engine; simply press the button to ignite and start. The system comes with a built-in start protection feature, not only making starting convenient but also providing a self-check protection function for the original starting system, ensuring the car does not start improperly and thus prolonging the vehicle's lifespan.
17
1
Share

Where is the VIN located on a Volkswagen Beetle?

The Volkswagen Beetle has two methods to locate the identification number: stamped on the right floor panel beneath the rear seat; or on the left side of the spare wheel well at the rear of the vehicle. Meaning of the VIN: The Vehicle Identification Number (VIN) is a unique 17-character alphanumeric code assigned to each vehicle, similar to an ID number. It identifies the manufacturer, engine, chassis number, and other details, and can also be used for anti-theft purposes. Explanation of the 17 characters: The first character indicates the country/region of origin. The second character identifies the vehicle manufacturer. The third character specifies the manufacturer's division or vehicle type. The next five characters (positions 4-8) describe vehicle attributes, with specific usage varying by manufacturer. The ninth character is always a check digit. The tenth character represents the model year code.
14
2
Share

Which Volkswagen models have a small rear seat hump?

Volkswagen models with a small rear seat hump include the C-TREK, T-Cross, TACQUA, and Tharu. Reasons for the rear seat hump in Volkswagen vehicles: All Volkswagen cars have a rear seat hump, which is designed to accommodate the exhaust pipe. Since sedans have relatively low ground clearance, without this hump to house the exhaust pipe, the pipe could scrape against the ground when driving on uneven surfaces. Many four-wheel-drive and rear-wheel-drive vehicles also have a rear seat hump. In addition to housing the exhaust pipe, these vehicles' humps also accommodate the drive shaft, making the hump higher in four-wheel-drive or rear-wheel-drive cars. Volkswagen brand group: Includes eight brands: Volkswagen Commercial Vehicles, Volkswagen Passenger Cars, ŠKODA, Bentley, Bugatti, Porsche, Scania, and MAN.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.