What upgrades does the 2022 Lynk & Co 03 have?

How to Adjust Car Headlights for Focused Beam?

Due to inherent design issues or various factors during modification, LED headlights may experience severe light scattering and lack of focus. Therefore, it is necessary to adjust the beam angle to meet the driver's safety requirements. The adjustment steps are as follows: 1. First, park the car 7.6 meters away from a wall, turn on the headlights, and then adjust the beam position based on the light pattern on the wall. Some vehicle models come with an integrated headlight height adjustment knob inside the car. If this feature is available, set the headlight height adjustment knob to the "0" position before adjusting the headlights. 2. Next, mark reference lines on the wall. Measure the distance from the center of the low beam to the vehicle's central axis, the distance from the center of the high beam to the vehicle's central axis, and the distance from the center of the low beam to the ground beforehand. 3. Finally, adjust the corresponding adjustment knobs located at the back of the headlights to fine-tune the beam position. The specific parts to adjust and the tools required may vary depending on the vehicle model. Before making adjustments, project the headlights onto the wall and observe whether the beam is misaligned, too high, or too low.

20

5

Share

Does the New Santana Lack a Rear Bumper Beam?

The New Santana is only equipped with a front anti-collision steel beam and does not have a rear bumper beam. Below is relevant information about the New Santana: 1. Exterior: The exterior completely abandons the boxy styling of the 1970s seen in the old Santana, replacing it with a more modern and stylish dynamic design, which now fully adopts the latest appearance of the Volkswagen family. The family-style front-end design makes it difficult to distinguish between Volkswagen's compact models, blurring the lines between these vehicles for many people. 2. Configuration: The New Santana is powered by 1.4L and 1.6L engines, codenamed EA211. This series of engines will include two displacements, with the 1.4L engine delivering a maximum power of 66kW and the 1.6L engine offering a maximum power of 81kW, both featuring a lighter all-aluminum structure. The transmission remains the same as the POLO, with a 5-speed manual and a 6-speed Tiptronic automatic transmission. The addition of the 6AT gives this not-so-high-end car better high-speed performance.

9

3

Share

Should You Press the Clutch or Brake When Going Down a Steep Slope?

When going downhill, you should press the brake. The specific reasons are as follows: 1. Precautions for downhill driving: When going downhill, you should press the brake and shift to a lower gear, and try to avoid pressing the clutch continuously. For manual transmission vehicles, you should not shift to neutral or press the clutch when going downhill; instead, lightly apply the brake to control the speed. 2. Reasons for using the foot brake: When coasting in neutral, relying solely on the foot brake will cause the front brake discs to overheat, significantly reducing their effectiveness. Moreover, if the speed is too high, coasting in neutral makes it difficult to control the vehicle's speed, so shifting to neutral when going downhill poses a high risk.

7

5

Share

What Causes the Sizzling Sound When the Car Air Conditioner is Turned On?

When the car air conditioner is turned on, it may produce a squeaking sound, which could be due to a loose or slipping belt of the car air conditioner; or a malfunction in the car's compressor; or foreign objects inside the blower and ventilation ducts. If you are not familiar with disassembly and assembly steps, it is best to go to a 4S shop for repair. Solutions for the squeaking sound when the air conditioner is on: 1. Belt slipping: The air conditioner pulley and belt slip, producing a sharp friction sound during the slipping process. Check if there is oil on the belt. If oil causes the belt to slip, clean it thoroughly. If not, adjust the compressor's position bolt to tighten the belt, which can increase friction. 2. Belt too loose: If the belt is too loose and causes abnormal noise, you can press the belt's tension by hand. If it's too loose, tighten it. If the belt has been used for too long, it needs to be replaced. 3. Tensioner pulley damage: If the belt's tensioner pulley is damaged, it can also cause abnormal noise, requiring replacement of a new tensioner pulley. 4. Clutch slipping: Abnormal noise caused by the compressor clutch slipping or compressor bearings requires disassembly to check the cause. 5. Foreign objects in ventilation ducts: Foreign objects entering the blower and ventilation ducts can also produce abnormal noise, requiring cleaning of the blower and ventilation ducts.

14

3

Share

How to Drive on Highways with Temporary License Plates

Temporary license plates can be used on highways as long as they are within the validity period and can be used in all regions, but relevant documents such as invoices, certificates of conformity, and proof of insurance purchase must be carried. Below is an introduction to the relevant content: 1. Conditions for Out-of-Province Travel: New cars with temporary license plates can travel to other provinces, but they must have cross-administrative district temporary license plates, and the temporary license plates must be within the validity period. 2. Temporary License Plates: Temporary license plates are temporary vehicle travel permits issued by the public security vehicle management department for newly purchased vehicles before formal registration. The validity period generally does not exceed thirty days. 3. Types of Temporary License Plates: Temporary license plates within administrative districts, cross-administrative district temporary license plates, temporary license plates for test vehicles, and temporary license plates for special vehicles. 4. Usage Period: New cars using temporary license plates must not exceed 15 days, and the owner should promptly apply to the vehicle management authority for the use of official license plates.

19

5

Share

Which country produces the Cullinan car?

Here is an introduction to the Cullinan: 1. The Cullinan is the first SUV model under the British Rolls-Royce brand and is currently the most expensive mass-produced SUV in the world. 2. It features design elements that embody the pure heritage of Rolls-Royce, such as the Spirit of Ecstasy hood ornament, the Parthenon-style grille, 'eyebrow' daytime running lights, and coach doors. In addition to inheriting the luxury feel of Rolls-Royce, its 6.7T V12 engine is renowned worldwide. 3. Despite its weight of 2.75 tons, it can achieve a 0-100 km/h acceleration time of 5.2 seconds. Officially, Rolls-Royce prefers to refer to the Cullinan as a 'high-bodied vehicle' and an 'all-terrain vehicle.'

11

2

Share

What upgrades does the 2022 Lynk & Co 03 have?

How to Adjust Car Headlights for Focused Beam?

Does the New Santana Lack a Rear Bumper Beam?

Should You Press the Clutch or Brake When Going Down a Steep Slope?

What Causes the Sizzling Sound When the Car Air Conditioner is Turned On?

How to Drive on Highways with Temporary License Plates

Which country produces the Cullinan car?

Can a 6-point deduction for running a red light be handled on the Traffic Management 12123 app?

What are optional features in cars?

What is the difference between V-rated and H-rated tires?

Why Does Manual Gear Shifting Feel Stiff and Jerky?