What types of vehicles can be driven with driver's license classes A, B, and C?

What should be the current when starting a car?

When starting a car, the current should be around 10A. The car battery provides the current for starting the car. When the generator is overloaded, it can assist the generator in supplying power to the electrical equipment. When the engine is idling, it supplies power to the electrical equipment. The battery is also a large-capacity capacitor that can protect the car's electrical appliances. When the generator's terminal voltage is higher than the electromotive force of the lead-acid battery, it can also charge. The starting current refers to the minimum current obtainable under specific conditions at temperatures between -17.8°C and -28.9°C, linking the battery's starting capability with the engine's displacement, compression ratio, temperature, the technical state of the engine and electrical system, the minimum operating voltage for starting and ignition, and other variables.

15

4

Share

Should You Shift to N or P Gear at a Red Light?

When waiting at a red light, shifting to N gear and engaging the handbrake can be more fuel-efficient. This is because the passive wheel in the torque converter of the transmission is in an idling state, which does not increase the resistance of the active wheel connected to the engine, thereby avoiding additional load. If the red light is very short, staying in D gear is also acceptable. Uses of N gear: 1. Temporary parking: You can temporarily shift to N gear; 2. Towing: When the vehicle needs inspection, repair, or towing for other reasons, it should be in N gear; 3. Parking and starting: N gear can also be flexibly used during parking and starting, such as starting in N gear, as shifting from N to D gear is very convenient.

18

1

Share

How to reattach a fallen ETC device?

If the ETC device falls off, it needs to be reactivated and then reattached using 3M double-sided tape. Precautions for using ETC: The ETC transaction sensing range is 8 meters. When encountering a stationary vehicle ahead, maintain a distance of more than 10 meters to prevent automatic payment for the vehicle in front, in case the front vehicle's ETC device malfunctions or lacks an ETC device entirely. The ETC lane recognizes vehicle speeds of up to 20km/h. Speeds exceeding this limit may result in failure to read the vehicle's device information and subsequent payment failure. Unauthorized removal or movement of the OBU device, or if the ETC electronic tag falls off or becomes loose, may render the electronic tag invalid. In such cases, the device can be taken to the bank where the ETC card was issued or to a highway service center for inspection. If the loosening or detachment was not due to human interference, reactivation is sufficient. When using a debit card linked to ETC, insufficient balance may cause payment failure. Follow the guidance of on-site staff to proceed to a manual MTC lane and use cash or card payment for passage. Excessively thick car windshields may lead to poor signal reception. This is particularly important for vehicles that have had their windshields replaced after accidents or for those with modified front windshields.

6

1

Share

How Long Is the Driver's License Point Clearance Cycle?

1. The clearance date for a driver's license is the issuance date on the license, and the system automatically clears the points on that date every year. Starting from the "initial issuance date" of the driver's license, one year constitutes a point cycle, and this cycle repeats continuously. 2. The point system operates on an annual basis, with the cycle beginning from the date the driver initially receives the driver's license. The maximum cumulative deduction within one point cycle is 12 points. If a driver reaches 12 points within a cycle, they must undergo relevant examinations. Upon passing the exams, the original points are cleared, and the point system resets.

3

2

Share

How to Replace the Coolant in a Volvo V40?

Volvo V40 coolant replacement method: 1. Open the radiator drain valve to release the coolant; 2. Clean the engine cooling system and drain completely, then close the drain valve; 3. Add coolant from the radiator filler port until the coolant fills the radiator up to the Max mark, being careful not to exceed the Max line. The Volvo V40 is defined as a compact body, a five-door hatchback model. The dimensions of the Volvo V40 are 4369mm in length, 1802mm in width, and 1445mm in height, with a wheelbase of 2647mm. In terms of the powertrain, the Volvo V40 has three power versions: a 1.5T turbocharged engine with a maximum output of 112kw and a peak torque of 250nm; a 2.0T turbocharged engine with a maximum output of 140kw and a peak torque of 300nm, paired with a 6-speed automatic transmission.

3

Share

Is It Normal for the Envision's Tire Pressure Monitoring System to Require Re-matching?

Method for re-matching the Envision's tire pressure monitoring: Start the vehicle, locate and press the SET button on the left side of the multifunction steering wheel, then confirm the operation by pressing the checkmark button on the right side of the multifunction steering wheel. Once successfully matched, the tire pressure display on the central dashboard will return to normal. There are three common methods of tire pressure monitoring: Direct Tire Pressure Monitoring: This system uses pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the data for each tire. The system automatically alerts the driver if the tire pressure is too low or if there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, making it rotate faster than the other wheels. By comparing the rotational speed differences between the tires, the system monitors the tire pressure. Essentially, the indirect tire pressure alert system relies on calculating the rolling radius of the tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): This system combines the advantages of both the direct and indirect systems. It equips direct sensors in two diagonally opposite tires and includes a 4-wheel indirect system. Compared to using only a direct system, this hybrid approach reduces costs and overcomes the indirect system's inability to detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time pressure data for all four tires as effectively as a full direct system.

10

1

Share

What types of vehicles can be driven with driver's license classes A, B, and C?

What should be the current when starting a car?

Should You Shift to N or P Gear at a Red Light?

How to reattach a fallen ETC device?

How Long Is the Driver's License Point Clearance Cycle?

How to Replace the Coolant in a Volvo V40?

Is It Normal for the Envision's Tire Pressure Monitoring System to Require Re-matching?

What engine does the Vezel have?

Differences Between the 2019 and 2018 Land Cruiser Models

Where is the windshield washer fluid spray location on the Roewe i5?

What are the hidden functions of the Nissan Bluebird key?