What types of vehicles can a Class E driver's license drive?

3 Answers
AxelDella
07/29/25 10:02am
E driver's license is for ordinary two-wheeled motorcycles; the vehicles it can drive are two-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed greater than 50km/h. The other permitted vehicle type is F. Below are the specific details: 1. Class E is for two-wheeled motorcycles, including light motorcycles (Class F). It can drive motorcycles with 800cc or 1600cc engines. Another difference between Class E and Class F is that the application age for Class E is 18-60, while for Class F it's 18-70. Classes D and E will be converted to Class F at the age of 70. 2. A Class E driver's license can drive ordinary motorcycles with a displacement greater than 50ml or a speed greater than 50km/h, and it can also drive motorcycles with a displacement less than 50ml or a speed less than 50km/h (i.e., Class F driver's license).
Was this review help?
1
3
Share
StElliott
08/13/25 12:34pm
A Class E license, which is a two-wheeled motorcycle driver's license, allows you to operate various types of two-wheeled motorcycles, including common street bikes, sports bikes, or scooters on the road, generally with an engine displacement exceeding 50cc. However, it does not permit driving three-wheeled motorcycles or car-like vehicles, such as small three-wheelers with a cargo box—those require a Class D license. I've had this license for several years and rely on it for daily commuting. It's super convenient for navigating through the city, fuel-efficient, and fast. But remember, wearing a certified helmet is a must to protect yourself from injuries. Obtaining a Class E license isn't too difficult—both the theory and road tests are quite basic. However, beginners should practice turning and braking in an open area first to avoid panic on the road. Riding in the rain poses significant risks—I've learned this the hard way, as slippery roads can lead to loss of control and crashes, so it's best to avoid riding in bad weather. In short, the Class E license is specifically for two-wheelers. While enjoying the ride, safety should always come first—otherwise, accidents can harm both yourself and others.
Was this review help?
16
0
Share
Expand All
ChristopherLee
08/13/25 12:36pm
The Class E motorcycle license exclusively qualifies riders to operate two-wheeled motorcycles, encompassing most road-going models such as Yamaha or Honda's standard series with engine displacements exceeding 50ml, excluding mopeds (covered by Class F license) or three-wheelers. Mechanically speaking, Class E motorcycles feature simpler engines, facilitating easier maintenance checks on engine oil and chains. I frequently assist friends with motorcycle repairs and recommend servicing every 500 kilometers to ensure proper brake system and tire conditions. Winter riding poses reduced tire traction—switching to anti-skid tires can mitigate risks. Safety-wise, never compromise on quality for cheaper alternatives; a premium helmet can be lifesaving. Always adhere to traffic light regulations during rides, decelerating appropriately when turning. Mastering additional riding techniques enhances overall riding fluidity.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

Where is the water drain groove in the subject 2 test vehicle?

The front windshield water drain groove is located under the front windshield, specifically the plastic guide channel beneath the front wipers. 1. Automobile water drain groove: As a crucial component of the vehicle body system, it serves as the primary drainage pathway for the car body, effectively collecting and discharging rainwater to prevent water ingress into the vehicle interior or cabin. Depending on whether the outlet is positioned at the end or bottom of the groove, automobile water drain grooves can be categorized into side-drainage grooves and bottom-drainage grooves. 2. Function: Typically installed behind the wheel housing of the vehicle body, the water drain groove often incorporates reinforcement plates to enhance the wheel housing's strength. However, these reinforcement plates may obstruct the drainage ports at the ends of side-drainage grooves, impairing their functionality. Creating openings in the reinforcement plates would compromise their structural integrity. In contrast, bottom-drainage grooves feature drainage holes at the base that connect to the external environment and remain unaffected by reinforcement plates. Installing bottom-drainage grooves behind the wheel housing effectively resolves drainage issues.
16
4
Share

Where should the front bumper stop during the slope start in Subject 2?

Car front bumper should be positioned on the pile rod line, with no more than 50cm deviation front or back. Extended information: 1. Positioning: When positioning, you need to find reference points on the vehicle body, such as: wiper reference points and test site marker poles, while also ensuring clear three-point alignment in your line of sight. However, the key point is mainly to find good reference objects, as they are the focus - otherwise it would be a case of 'move one and affect the whole'. 2. Don't rush: The most crucial aspect during startup is not to rush, as there's definitely sufficient time. Control the clutch properly and absolutely avoid stalling the vehicle. If rolling back causes a stall, brake immediately. Note that when preparing to start on a slope, remember to first turn on the turn signal, then release the clutch, and when the vehicle body vibrates, slowly lift the brake.
8
4
Share

How to Check if a Thermostat is Good or Bad?

There are mainly the following methods to check whether a thermostat is good or bad: 1. When the engine starts cold operation, if there is still coolant flowing out at the inlet pipe of the upper water chamber of the radiator, it indicates that the main valve of the thermostat cannot close. 2. When the engine coolant temperature exceeds 70°C, if there is no coolant flowing out at the inlet pipe of the upper water chamber of the radiator, it indicates that the main valve of the thermostat cannot open normally, and repair is needed at this time. The function of the thermostat is to automatically adjust the amount of water entering the radiator according to the temperature of the coolant, change the circulation range of the water, and adjust the heat dissipation capacity of the cooling system to ensure that the engine works within a suitable temperature range. The thermostat must maintain good technical condition, otherwise it will seriously affect the normal operation of the engine. If the main valve of the thermostat opens too late, it will cause the engine to overheat; if the main valve opens too early, it will prolong the engine preheating time and make the engine temperature too low.
5
5
Share

What class of sedan is the Roewe i6max?

Roewe i6max is a compact car with dimensions of 4722mm (length), 1835mm (width), 1464mm (height), and a wheelbase of 2715mm. Below is an introduction to the Roewe i6max: 1. The Roewe i6max is equipped with a 1.5-liter turbocharged four-cylinder engine across all variants. It delivers a maximum power of 127kW and a peak torque of 275Nm. The engine reaches its maximum power at 5600 rpm and its peak torque between 1750 to 4000 rpm. This engine features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 2. The Roewe i6max employs a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear. The multi-link suspension is a structurally complex independent suspension system that replaces the two arms of a double-wishbone suspension with separate links.
15
5
Share

What is the standard for stopping in Subject 2 of the driving test?

A pause of more than 2 seconds is considered an intermediate stop. In the driving license Subject 2 test, an intermediate stop is determined when the GPS positioning confirms that the vehicle is in a completely stationary state during the test. Additional information: 1. Time limit: If you fail the Subject 2 test once, you can retake it once. If you do not take the retest or fail the retest, the current test is terminated, and the applicant must reschedule the test after ten days. Within the validity period of the driving skill permit, the number of scheduled tests for Subject 2 and Subject 3 road driving skills tests must not exceed five times. If the fifth scheduled test is still failed, the results of other subjects that have been passed will be invalidated. 2. Revised regulations: Starting in 2017, the new driving test regulations revised the rules regarding intermediate stops in Subject 2. Before the revision, stopping during the reverse parking test would result in failure, but after the reform, each intermediate stop during reverse parking deducts 5 points.
6
0
Share

How to Turn on the Octavia's Air Conditioning?

For the Octavia's air conditioning, pressing the AC button activates the compressor switch, which is the cooling switch. The left side controls temperature - green indicates lower temperature while red indicates higher temperature. The middle section adjusts the fan speed levels. Below is an introduction to car air conditioning: 1. The car air conditioning device (air-conditioning-device), abbreviated as car AC, is used to regulate and control the temperature, humidity, air cleanliness, and airflow within the vehicle cabin to optimal conditions. It provides passengers with a comfortable environment, reduces travel fatigue, and creates favorable working conditions for drivers, playing a crucial role in ensuring safe driving. 2. It generally includes cooling devices, heating devices, and ventilation systems. This integrated system makes full use of the limited interior space of the vehicle, featuring a simple structure and easy operation, making it the internationally popular modern car air conditioning system. 3. The functions of automatic air conditioning include automatic adjustment of interior temperature and humidity, automatic control of air recirculation and supply modes, as well as operation methods and air exchange volume control.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.