What types of vehicles are restricted on the Duku Highway?

What is the difference between GAC and FAW?

GAC and FAW have the following differences: 1. Different historical backgrounds. FAW Toyota was established in 2000 as Toyota's first partner in China, while GAC Toyota was established in 2004 as Toyota's second partner in China. In terms of seniority, FAW Toyota is older than GAC Toyota, so in the minds of many people, FAW Toyota has a purer pedigree. 2. Differences in vehicle models. Most of Toyota's main models are under FAW, including the Corolla, Crown, Reiz, RAV4, Prado, and even the Coaster bus for leaders. On the other hand, GAC Toyota has models like the Levin, Camry, Highlander, Alphard, Yaris, and C-HR. 3. Differences in production quality: In 2016, GAC Toyota was the only one among Toyota's 50 global factories to receive the title of zero defects for the entire year. Additionally, the 2.0T direct-injection engine produced by GAC Toyota is sold directly abroad and is also used in the Lexus ES200, while FAW Toyota lags behind in this aspect. 4. Differences in complaint ratios: In 2017, FAW Toyota sold 693,000 vehicles, while GAC Toyota sold 440,000 vehicles, with FAW Toyota's sales being 56% higher than GAC Toyota's. However, in terms of the number of complaints, FAW Toyota had 1,017 complaints on authoritative automotive complaint websites, while GAC Toyota only had 342. Therefore, in terms of the sales-to-complaint ratio, FAW Toyota is significantly higher than GAC Toyota.

19

4

Share

Where is the Nissan Teana's Cabin Air Filter Located?

The cabin air filter of the Nissan Teana is located below the glove compartment on the passenger side, near the left foot area of the passenger seat. Here is some relevant information about the cabin air filter: 1. The replacement cycle for a car's cabin air filter is 10,000 kilometers, and it is generally recommended to replace it in the spring. After being used throughout the previous summer and winter, the effectiveness of the filter will decrease if it continues to be used. 2. It separates solid impurities such as pollen and PM2.5 from the air, absorbs moisture, carbon dioxide, car exhaust, and odors, ensuring clean air in the cabin and preventing bacterial growth. 3. There are two types of cabin air filters: one without activated carbon and one with activated carbon. When purchasing, it is advisable to choose one with activated carbon filtration and adsorption functions, as it is more effective in removing odors, bacteria, and absorbing moisture.

8

5

Share

Differences Between Steel Wheels and Aluminum Alloy Wheels

Aluminum alloy wheels have better heat dissipation and are lighter compared to steel wheels. The main differences between aluminum alloy wheels and steel wheels are as follows: 1. Aluminum alloy wheels dissipate heat better than steel wheels: The thermal conductivity of aluminum alloy is about three times that of ordinary steel wheels. When a car is in motion, the tires and wheels generate a significant amount of heat, which can accumulate on the wheels and affect braking performance, leading to wear on the brakes, wheels, and tires. Aluminum alloy wheels can quickly transfer this heat to the air, enhancing the vehicle's safety. 2. Aluminum alloy wheels are lighter than steel wheels: An aluminum alloy wheel is approximately 2 kilograms lighter than a steel wheel, meaning four aluminum alloy wheels can be about 8 kilograms lighter than steel wheels. This improves the car's handling, making it more agile during turns and reducing fuel consumption. 3. Aluminum alloy wheels are more aesthetically pleasing than steel wheels: Aluminum alloy wheels have a better overall appearance, are resistant to rust, and replacing wheels of the same size is permitted during vehicle inspections.

1

Share

Should You Use Internal or External Air Circulation When Turning on the Car Air Conditioner in Winter?

You can first turn on the internal circulation to quickly lower or raise the temperature inside the car. Once the temperature stabilizes, appropriately switch to external circulation to exchange air with the outside. Below are the differences between internal and external circulation: 1. Air intake position: The air intake for internal circulation is inside the car, meaning outside air cannot enter, and inside air cannot exit. The air intake for external circulation is located below the front windshield wiper, at the junction of the front windshield and the engine hood, which draws in outside air. 2. Air freshness: Over time, the air in internal circulation becomes stale, with reduced oxygen levels, leading to feelings of heat, fatigue, anxiety, and other symptoms that affect driving safety. External circulation ensures airflow between the inside and outside of the car, preventing excessive carbon dioxide concentration.

13

0

Share

What is the method for removing the center console armrest of the BYD F3?

The BYD F3 is equipped with a 1.5L inline 4-cylinder naturally aspirated engine across all models, paired with either a 5-speed manual or a 6-speed dual-clutch transmission. Below are the steps for removing the center console armrest of the BYD F3: 1. First, open the armrest of the BYD F3; 2. Then, remove the screws inside the armrest; 3. Next, shift the car's gear to the N (neutral) position, grip the gear shift handle firmly, and pull it upwards to release the fixing clip of the gear lever; 4. Use a pry tool to separate the storage box panel and the armrest joint; 5. Pry open the clips on both sides of the car's armrest; 6. Lift the armrest upwards; 7. Finally, the armrest of the BYD F3 is successfully removed.

14

4

Share

What does car rear suspension mean?

Rear suspension is a shock absorption mechanism. More details about rear suspension are as follows: 1. Link-type rear suspension: Mainly used in FR drive systems where the rear axle is integrated left and right. There is one pair of links on each side, divided into upper links and lower links, serving as the mechanism to transmit the driving force of the car. It usually forms a five-link configuration together with a lateral thrust rod, aiming to prevent lateral movement of the axle or body. 2. Swing-arm type rear suspension: In this type of rear suspension, only the differential in the middle of the axle is fixed, with universal joints set between the differential and the wheels on both sides, swinging around them. The wheels are connected to the frame with a Y-shaped lower swing arm. The single end of the "Y" is rigidly connected to the wheel, while the other two ends are connected to the frame to form a pivot. Depending on whether this pivot is parallel to the axle, swing-arm suspensions are further divided into full trailing arm and semi-trailing arm types. The parallel one is called full trailing arm, and the non-parallel one is called semi-trailing arm.

8

5

Share

What types of vehicles are restricted on the Duku Highway?

What is the difference between GAC and FAW?

Where is the Nissan Teana's Cabin Air Filter Located?

Differences Between Steel Wheels and Aluminum Alloy Wheels

Should You Use Internal or External Air Circulation When Turning on the Car Air Conditioner in Winter?

What is the method for removing the center console armrest of the BYD F3?

What does car rear suspension mean?

Why does the tire pressure warning light come on after changing tires?

Can Temporary License Plates Be Recognized in Parking Lots?

Is it okay to change the engine oil without replacing the oil filter?

Reasons for Many Small Yellow Spots on White Cars